|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] RE: [Xen-users] Problem with WinXP install. Can start but not connect via vnc
> -----Original Message----- > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Carlo > Sent: 21 December 2006 17:20 > To: xen-users@xxxxxxxxxxxxxxxxxxx > Subject: RE: [Xen-users] Problem with WinXP install. Can > start but not connect via vnc > > Hi, I've a problem: I've the same config file, xen 3.0.3 > installed from > source. > I can start windows in a domU but I can't see it with graphic. > > If I type "xm list" I can see it in the list and the time is > not 0 (i think > that a number that is not 0 it's ok... isn't it?). > > if I start it with qemu it work fine but without network (in > the hardware > list thereis a network card). > > Here I posted a log of qemu-dm: > > domid: 5 > qemu: the number of cpus is 1 > shared page at pfn:1ffff, mfn: 1c10f > buffered io page at pfn:1fffd, mfn: 1c111 > False I/O request ... in-service already: 0, pvalid: 0, port: > 0, data: 0, > count: > 0, size: 0 > > > And my config file is: > > kernel = "/usr/lib/xen/boot/hvmloader" > builder = 'hvm' > memory = 512 > name = "winxp" > vcpus = 1 > vif = [ '' ] > disk = [ 'file:/vserver/images/winxp.img,ioemu:hda,w' ] > device_model = '/usr/lib/xen/bin/qemu-dm' > cdrom='/dev/hdd' > ne2000=0 > boot='c' No mention of VNC/SDL at all - you probably can't rely on the defaults for any of those being "right" for you... I find that SDL works better for me than VNC, but that's probably me rather than the actual quality of either software product. -- Mats > > > I've installed Windows with qemu but also if I try to install > it with xen > and a blank image file, it doesn't boot... > > If compiled the kernel with TUN/TAP module, any support for > graphic card ad > IDE/SATA controller (they work fine). > > Any suggestion? > > CPU is Athlon 3800+ X2 with AMD-V, MB is ASUS M2V. > > Thanks > > > --------- Original Message -------- > From: Gerhard Possler <gerhard.possler@xxxxxxxxxx> > To: Benny Pfitzner <pfitzner-lug@xxxxxxx> > Cc: xen-users@xxxxxxxxxxxxxxxxxxx > Subject: RE: [Xen-users] Problem with WinXP install. Can start but > not connect via vnc > Date: 21/12/06 12:23 > > > > > Hi Benny, > > > > i'm not sure that vnc ist working with > > hvm (MS) you do not have in an standard installation an > vncserver... but > > can you ping your guest? > > > > (vnc would run with an Linux hvm guest > > because you have here in many OS's an vncserver allready as default) > > > > you should connect to the guest and > > not to localhost. I use RDP to connect to my XP session, from Linux > someting > > like: > > > > rdesktop -g 1200x1024 -a 24 -k de 10.0.0.2 > > > > 10.0.0.2 is my XP guest. > > > > Gerhard > > > > xen-users-bounces@xxxxxxxxxxxxxxxxxxx wrote on 20.12.2006 > > 18:44:53: > > > > > Am Mittwoch, den 20.12.2006, 18:18 +0100 schrieb > Petersson, Mats: > > > > > > Hello, > > > > > > I started the domain again with <boot='c'> and a > I saw a lot > > of I/O > > > access. But I still don't know how to connect via vnc. > > > > > > Here is my most recent qemu-log: > > > **************************************** > > > domid: 8 > > > qemu: the number of cpus is 1 > > > shared page at pfn:bfff, mfn: 2172b > > > buffered io page at pfn:bffd, mfn: 2172d > > > False I/O request ... in-service already: 0, pvalid: > 0, port: 0, > data: > > > 0, count: 0, size: 0 > > > **************************************** > > > > > > And here you can find the last couple of lines in my > xend.log-file: > > > http://pastebin.ca/286417 > > > > > > I have a qemu running: > > > **************************** > > > pfitzner:/var/log/xen# lsof -i|grep qemu > > > qemu-dm 14352 root > 8u > > IPv4 26087 TCP > > > localhost.localdomain:5900 (LISTEN) > > > pfitzner:/var/log/xen# vncviewer localhost:5900 > > > vncviewer: ConnectToTcpAddr: connect: Connection refused > > > Unable to connect to VNC server > > > **************************** > > > > > > > > > Thank you guys very much. > > > > > > Ben > > > > > > > > > > > > -----Original Message----- > > > > > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx > > > > > > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf > > Of > > > > > Benny Pfitzner > > > > > Sent: 20 December 2006 17:15 > > > > > To: xen-users@xxxxxxxxxxxxxxxxxxx > > > > > Subject: Re: [Xen-users] Problem with WinXP > install. Can > > > > > > > start but not connect via vnc > > > > > > > > > > Am Mittwoch, den 20.12.2006, 16:04 +0000 schrieb Ryan > Worsley: > > > > > > Hi Benny, > > > > > > > > > > > > Benny Pfitzner wrote: > > > > > > > Hi, > > > > > > > > > > > > > > I run debian etch with xen > packages provided by > > debian. > > > > > They are running > > > > > > > fine. > > > > > > > Today I tryed to install Windows > XP. Here is my > > config: > > > > > > > > *********************************************** > > > > > > > kernel = > "/usr/lib/xen-3.0.3-1/boot/hvmloader" > > > > > > > builder = 'hvm' > > > > > > > memory = 512 > > > > > > > name = "winxp" > > > > > > > vcpus = 1 > > > > > > > vif = [ 'type=ioemu, bridge=xenbr0' ] > > > > > > > disk = [ > > > > > > 'file://vserver/images/domains/winxp/winxp.img,ioemu:hda,w' > > ] > > > > > > > device_model = '/usr/lib/xen/bin/qemu-dm' > > > > > > > #cdrom='/dev/hda' > > > > > > > > cdrom='/vserver/images/domains/winxp/winxp.iso' > > > > > > > > > > > > > The cdrom= lines had no effect for me, > I think they're > > > > > > > obsolete now or > > > > > > something, instead I have a disk line > that looks like > > this; > > > > > > > > > > > > disk = [ > 'phy:/dev/sys_vg/windows_os,ioemu:hda,w', > > > > > > > > > 'file:/vserver/images/domains/winxp/winxp.iso,hdc:cdrom,r' > > ] > > > > > > > > > > Thank you very much Ryan, > > > > > > > > > > you are totally right. They changed it in > version 3.0.3. > > > > > > > > > > I added vncviewer=1 and sdl=1 to my > configfile and started > > the domain > > > > > again. > > > > > > > > > > Then I automatically I got vncviewer running my WinXP > install > > screen. > > > > > After formatting the image and so on Windows > want's to > reboot. > > > > > > > > > > Since then I don't have connection to the domain. > > > > > > > > > > I posted my netstat -l output here because I > just can't > > find the port: > > > > > http://pastebin.ca/raw/286397 > > > > > > > > > > My logs don't show anything regarding vnc. > > > > > Here is the output of the most recent qemu-log: > > > > > ************************************************* > > > > > domid: 7 > > > > > qemu: the number of cpus is 1 > > > > > shared page at pfn:1ffff, mfn: 1d24b > > > > > buffered io page at pfn:1fffd, mfn: 1d24d > > > > > ************************************************* > > > > > > > > > > Here I posted the last couple of lines from > the xend.log > > file. > > > > > http://pastebin.ca/286403 > > > > > > > > I bet you don't have a qemu-dm process for some > reason... Try > > starting > > > > the domain from scratch (booting from the > hard-disk, not CD-ROM > > this > > > > time). > > > > > > > > If starting it again doesn't work, can you show > the qemu-log > > from the > > > > new vm? > > > > > > > > -- > > > > Mats > > > > > > > > > > > > > > > Thanks Ben > > > > > > > > > > > > > > > > > > ne2000=0 > > > > > > > boot='d' > > > > > > > vif = [ 'ip=192.168.0.205' ] > > > > > > > vnc=1 > > > > > > > vncviewer=0 > > > > > > > > > > > > > Do you not have to set vncviewer to 1 > to get it create > > the > > > > > window for > > > > > > you? I personally used SDL > instead (sdl=1). > You > > also say > > > > > your domain > > > > > > is 17, I think when I experimented with > VNC I found > > it to > > > > > create the > > > > > > listening port on something like 4017 > or whatever. > > I used > > > > > netstat -l to > > > > > > find out what port it was actually on. > > > > > > > > > > > > Ben, lastly, could you check your > /var/log/xen folder > > for error > > > > > > messages, specifically check the most > recent qemu log. > > > > > > > > > > > > Thanks, > > > > > > > > > > > > Ryan. > > > > > > > > *********************************************** > > > > > > > > > > > > > > When I try to start the domain it > seems to run > > fine: > > > > > > > > *********************************************** > > > > > > > pfitzner:/etc/xen# xm create winxp2 > > > > > > > Using config file "winxp2". > > > > > > > Started domain winxp > > > > > > > > *********************************************** > > > > > > > > > > > > > > But when I try to connect to the > domain via vnc > > I get the > > > > > message that > > > > > > > the viewer can't connect: > > > > > > > > *********************************************** > > > > > > > pfitzner:/vserver/images/domains# vncviewer > pfitzner:17 > > > > > > > vncviewer: ConnectToTcpAddr: > connect: Connection > > refused > > > > > > > Unable to connect to VNC server > > > > > > > > *********************************************** > > > > > > > > > > > > > > P.S.: > > > > > > > 17 is the ID of the domain and I > have a Intel > > Pentuim D with VT: > > > > > > > pfitzner:/vserver/images/domains# > xm dmesg | grep > > VMX > > > > > > > (XEN) VMXON is done > > > > > > > (XEN) VMXON is done > > > > > > > > > > > > > > > > > > > > > Does somebody might have a idea > what I did do > > wrong? > > > > > > > > > > > > > > Tanks Ben > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > Xen-users mailing list > > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx > > > > > > > http://lists.xensource.com/xen-users > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Xen-users mailing list > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx > > > > > > http://lists.xensource.com/xen-users > > > > > > > > > > > > > > > _______________________________________________ > > > > > Xen-users mailing list > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx > > > > > http://lists.xensource.com/xen-users > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Xen-users mailing list > > > Xen-users@xxxxxxxxxxxxxxxxxxx > > > http://lists.xensource.com/xen-users > > > > > > > > > > > > _______________________________________________ > > Xen-users mailing list > > Xen-users@xxxxxxxxxxxxxxxxxxx > > http://lists.xensource.com/xen-users > > ________________________________________________ > Message sent using UebiMiau 2.7.10 > > > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users > > > _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |