|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Problem with ssci disk
Hi all, I have a problem during the lauching of my first virtual image. First thing : domain 0 is on fedora core 6 (probably a xen package made in fedora :-S, sorry ...) Second thing : the error is really traditional (i already had it with uml) but there i am blocking. here my config file (for image on logical volume, swap too) root = "/dev/sda1 ro" [root@p-virtvip8 xen]# cat p-virtser9 kernel = "/boot/vmlinuz-2.6.18-1.2798.fc6xen" initrd = "/boot/initrd- 2.6.18-1.2798.fc6xen.img" memory = 100 name = "p-virtvip9" vif = ['mac=00:16:3E:10:10:09, bridge=xenbr0', 'mac=00:16:3E:20:00:09, bridge=xenbr1'] disk = ['phy:VG1_XenBackend/RHEL4_root_vip9,sda1,w', 'phy:VG1_XenBackend/RHEL4_swap_vip9,sda2,w'] root = "/dev/sda1 ro" The log is : [root@p-virtvip8 linux-2.6.19]# xm create -c /etc/xen/p-virtser9 Using config file "/etc/xen/p-virtser9". Started domain p-virtvip9 Linux version 2.6.18-1.2798.fc6xen (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 15:11:19 EDT 2006 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000006c00000 (usable) 0MB HIGHMEM available. 108MB LOWMEM available. Using x86 segment limits to approximate NX protection ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 27648 Kernel command line: root=/dev/sda1 ro Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c078a000 soft=c076a000 PID hash table entries: 512 (order: 9, 2048 bytes) Xen reported: 3200.112 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Software IO TLB disabled vmalloc area: c7800000-f4ffe000, maxmem 2d7fe000 Memory: 96724k/110592k available (2097k kernel code, 5516k reserved, 840k data, 180k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 8005.11 BogoMIPS (lpj=16010227) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed Brought up 1 CPUs Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 4, 81920 bytes) TCP bind hash table entries: 2048 (order: 3, 40960 bytes) TCP: Hash tables configured (established 4096 bind 2048) TCP reno registered IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx> audit: initializing netlink socket (disabled) audit(1165580347.856:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 8BDC589434DBC709 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Linux version 2.6.18-1.2798.fc6xen (brewbuilder@xxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Mon Oct 16 15:11:19 EDT 2006 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000006c00000 (usable) 0MB HIGHMEM available. 108MB LOWMEM available. Using x86 segment limits to approximate NX protection ACPI in unprivileged domain disabled Built 1 zonelists. Total pages: 27648 Kernel command line: root=/dev/sda1 ro Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c078a000 soft=c076a000 PID hash table entries: 512 (order: 9, 2048 bytes) Xen reported: 3200.112 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Software IO TLB disabled vmalloc area: c7800000-f4ffe000, maxmem 2d7fe000 Memory: 96724k/110592k available (2097k kernel code, 5516k reserved, 840k data, 180k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 8005.11 BogoMIPS (lpj=16010227) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code Freeing SMP alternatives: 12k freed Brought up 1 CPUs Grant table initialized NET: Registered protocol family 16 Brought up 1 CPUs PCI: setting up Xen PCI frontend stub ACPI: Interpreter disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI: disabled xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: System does not support PCI PCI: System does not support PCI NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 4, 81920 bytes) TCP bind hash table entries: 2048 (order: 3, 40960 bytes) TCP: Hash tables configured (established 4096 bind 2048) TCP reno registered IA-32 Microcode Update Driver: v1.14-xen < tigran@xxxxxxxxxxx> audit: initializing netlink socket (disabled) audit(1165580347.856:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 8BDC589434DBC709 - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 rtc: IRQ 8 is not free. Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as xvc0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. i8042.c: No controller found. mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode XENBUS: Device with no driver: device/vbd/2049 XENBUS: Device with no driver: device/vbd/2050 XENBUS: Device with no driver: device/vif/0 XENBUS: Device with no driver: device/vif/1 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. VFS: Cannot open root device "sda1" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) The kernel is ok, it seems my sda hd was not detected. However I chroot my logical volume and create an initrd. Here my lsmod of domain 0 : [root@p-virtvip8 linux-2.6.19]# lsmod Module Size Used by xt_physdev 7121 0 bridge 60381 1 xt_physdev netloop 11073 0 netbk 79845 0 [permanent] blktap 386789 2 [permanent] blkbk 22753 0 [permanent] autofs4 25413 2 hidp 24129 2 rfcomm 46041 0 l2cap 31681 10 hidp,rfcomm bluetooth 58917 5 hidp,rfcomm,l2cap sunrpc 158332 1 dummy 7237 0 ip_conntrack_netbios_ns 7105 0 ipt_REJECT 9665 1 xt_state 6337 2 ip_conntrack 56992 2 ip_conntrack_netbios_ns,xt_state nfnetlink 11353 1 ip_conntrack iptable_filter 7233 1 ip_tables 17669 1 iptable_filter ip6t_REJECT 9537 1 xt_tcpudp 7361 9 ip6table_filter 7105 1 ip6_tables 18821 1 ip6table_filter x_tables 18501 7 xt_physdev,ipt_REJECT,xt_state,ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables ipv6 267489 25 ip6t_REJECT dm_mirror 33041 0 dm_multipath 22601 0 dm_mod 61529 54 dm_mirror,dm_multipath video 21061 0 sbs 20225 0 i2c_ec 9281 1 sbs i2c_core 25537 1 i2c_ec button 10961 0 battery 14405 0 asus_acpi 20697 0 ac 9541 0 parport_pc 31205 1 lp 17033 0 parport 40841 2 parport_pc,lp floppy 58725 0 snd_intel8x0 36445 0 snd_ac97_codec 95073 1 snd_intel8x0 snd_ac97_bus 6593 1 snd_ac97_codec snd_seq_dummy 8133 0 snd_seq_oss 37185 0 snd_seq_midi_event 11841 1 snd_seq_oss snd_seq 57137 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event sg 38493 0 snd_seq_device 12621 3 snd_seq_dummy,snd_seq_oss,snd_seq snd_pcm_oss 46561 0 snd_mixer_oss 20545 1 snd_pcm_oss snd_pcm 80453 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 27077 2 snd_seq,snd_pcm snd 57029 9 snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss, snd_pcm,snd_timer soundcore 14113 1 snd snd_page_alloc 14409 2 snd_intel8x0,snd_pcm e752x_edac 15173 0 edac_mc 27465 1 e752x_edac ohci1394 38917 0 pcspkr 7361 0 e1000 124881 0 ieee1394 301593 1 ohci1394 serio_raw 11205 0 ide_cd 42337 2 cdrom 38625 1 ide_cd ata_piix 18121 0 libata 103385 1 ata_piix mptspi 21321 2 mptscsih 27713 1 mptspi mptbase 56673 2 mptspi,mptscsih scsi_transport_spi 28993 1 mptspi sd_mod 24897 11 scsi_mod 138729 6 sg,libata,mptspi,mptscsih,scsi_transport_spi,sd_mod ext3 135369 1 jbd 63209 1 ext3 ehci_hcd 35917 0 ohci_hcd 25437 0 uhci_hcd 27725 0 (it's a fresh install ...) And the modprobe.conf of my image : alias scsi_hostadapter mptbase alias scsi_hostadapter1 mptscsih alias scsi_hostadapter2 ata_piix The command i used to generate the inirtd (within chroot) : mkinitrd /tmp/image 2.6.18-1.2798.fc6xen Then exit and copy the image in /boot/initrd-2.6.18-1.2798.fc6xen.img Thanks 4 any help. Rgds, David _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |