Petersson, Mats schrieb:
-----Original Message-----
From: Dietmar Simons [mailto:info@xxxxxxxxxxxxxxxxxxxx]
Sent: 23 November 2006 17:00
To: Petersson, Mats
Subject: Re: [Xen-users] Xen Dom0 with FibreChannel (FC)
can't export disk to DomU
Petersson, Mats schrieb:
-----Original Message-----
From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx]
On Behalf Of
Dietmar Simons
Sent: 23 November 2006 15:59
To: Xen users mailing list
Subject: [Xen-users] Xen Dom0 with FibreChannel
(FC) can't
export disk to DomU
Hello all,
I have a problem with Xen and FibreChannel.
The Dom0 can't export a Disk on a FibreChannel
SAN-Box to the DomU's.
In the DomU configuration I try:
disk = [ 'phy:/dev/sdb1,/dev/sda1,w' ]
or
disk = [ 'file:/mnt/sambashare.img,sda1,w' ]
Try
disk = [ 'phy:/dev/sdb1,/dev/hda1,w' ]
disk = [ 'file:/mnt/sambashare.img,hda1,w' ]
Respectively, and see if that works - if you haven't
got a SCSI type
driver in DomU, your DomU system probably wont have
"sdax" devices
(where a is an alpha-character, x a number).
--
Mats
Hi Mats,
thanks for your help, and I try it like your description, but
nothing. There is no device sdax or hdax.
My DomU based on Dom0, there are the same drivers, modules
and kernels.
LSI Modules call mpt.... (e.g. mptfc)
And I presume you have an initrd to load the relevant drivers?
--
Mats
--
Dietmar
Hi again,
yes of course, I use the same initrd in my Dom0 and DomU
--
Dietmar
|
