|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Xen 3.0.3 boot-time kernel panic with prebuilt binaries and source but not demo CD
Hi All,I have an ordinary system that has been running xen 3.0.2 perfectly for quite a while. It also boots up from the Xen 3.0.3 Demo CD just fine. But when I install the prebuilt Xen 3.0.3 binaries, it kernel panics. It also kernel panics with the same symptoms when I build Xen 3.0.3 from source. See below for full text of the logs.The first log is the serial console when booting the xen 303 prebuilt binaries. Kernel panic. The second log is the dmesg file from the xen 303 demo CD (debian dom0 gui). Same machine. Works. The third section is the output of lspci from a non-xen boot of the same machine (because I was thinking this is a PCI issue, but I'm not so sure now). Any advice is appreciated. TIA, - Mike *** XEN 3.0.3 PREBUILT KERNEL - KERNEL PANIC Booting 'Fedora Core (xen-3.0.3-0_prebuilt)' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /xen-3.0.3-0.gz com1=9600,8n1 sync_console watchdog [Multiboot-elf, <0x100000:0x7e5d8:0x47a28>, shtab=0x1c6078, entry=0x100000] module /vmlinuz-2.6.16.29-xen ro root=/dev/VolGroup00/LogVol00 console=ttyS0,96 00 console=tty0 selinux=0 ramdisk_size=32758 [Multiboot-module @ 0x1c7000, 0x2e29c0 bytes] module /initrd-2.6.16.29-xen.img [Multiboot-module @ 0x4aa000, 0x3a0e00 bytes] __ __ _____ ___ _____ ___ \ \/ /___ _ __ |___ / / _ \ |___ / / _ \ \ // _ \ '_ \ |_ \| | | | |_ \ __| | | | / \ __/ | | | ___) | |_| | ___) |__| |_| | /_/\_\___|_| |_| |____(_)___(_)____/ \___/ http://www.cl.cam.ac.uk/netos/xen University of Cambridge Computer LaboratoryXen version 3.0.3-0 (shand@localdomain) (gcc version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)) Sun Oct 15 13:22:06 BST 2006 Latest ChangeSet: Sun Oct 15 13:22:03 2006 +0100 11773:433e39d54b0e (XEN) Console output is synchronous. (XEN) Command line: /xen-3.0.3-0.gz com1=9600,8n1 sync_console watchdog (XEN) Physical RAM map: (XEN) 0000000000000000 - 000000000009b800 (usable) (XEN) 000000000009b800 - 00000000000a0000 (reserved) (XEN) 00000000000e0000 - 0000000000100000 (reserved) (XEN) 0000000000100000 - 000000003fef0000 (usable) (XEN) 000000003fef0000 - 000000003fefc000 (ACPI data) (XEN) 000000003fefc000 - 000000003ff00000 (ACPI NVS) (XEN) 000000003ff00000 - 000000003ff80000 (usable) (XEN) 000000003ff80000 - 0000000040000000 (reserved) (XEN) 00000000fec00000 - 00000000fec10000 (reserved) (XEN) 00000000fee00000 - 00000000fee01000 (reserved) (XEN) 00000000ff800000 - 00000000ffc00000 (reserved) (XEN) 00000000fff00000 - 0000000100000000 (reserved) (XEN) System RAM: 1023MB (1047596kB) (XEN) Xen heap: 10MB (10440kB) (XEN) PAE disabled. (XEN) found SMP MP-table at 000f64d0 (XEN) DMI present. (XEN) Using APIC driver default (XEN) ACPI: RSDP (v000 PTLTD ) @ 0x000f6500 (XEN) ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3fef8674 (XEN) ACPI: FADT (v001 Intel SE7501CW 0x06040000 PTL 0x00000008) @ 0x3fefbe94(XEN) ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3fefbf08
(XEN) ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3fefbf88
(XEN) ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x3fefbfb0
(XEN) ACPI: DSDT (v001 INTEL PLUMAS 0x06040000 MSFT 0x0100000e) @ 0x00000000
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
(XEN) Processor #0 15:2 APIC version 20
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
(XEN) Processor #1 15:2 APIC version 20
(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
(XEN) ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48])
(XEN) IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 3 I/O APICs
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Initializing CPU#0
(XEN) Detected 2392.094 MHz processor.
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
(XEN) CPU: L2 cache: 512K
(XEN) CPU: Physical Processor ID: 0
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#0.
(XEN) CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
(XEN) CPU0: Thermal monitoring enabled
(XEN) CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
(XEN) Booting processor 1/1 eip 90000
(XEN) Initializing CPU#1
(XEN) CPU: Trace cache: 12K uops, L1 D cache: 8K
(XEN) CPU: L2 cache: 512K
(XEN) CPU: Physical Processor ID: 0
(XEN) Intel machine check architecture supported.
(XEN) Intel machine check reporting enabled on CPU#1.
(XEN) CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
(XEN) CPU1: Thermal monitoring enabled
(XEN) CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 09
(XEN) Total of 2 processors activated.
(XEN) Testing NMI watchdog --- CPU#0 okay. CPU#1 okay.
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) checking TSC synchronization across 2 CPUs: passed.
(XEN) Platform timer is 1.193MHz PIT
(XEN) Brought up 2 CPUs
(XEN) Machine check exception polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Domain 0 kernel supports features = { 0000001f }.
(XEN) Domain 0 kernel requires features = { 00000000 }.
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 3e000000->3f000000 (236249 pages to be allocated)
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: c0100000->c04784bc
(XEN) Init. ramdisk: c0479000->c0819e00
(XEN) Phys-Mach map: c081a000->c0904b64
(XEN) Start info: c0905000->c090546c
(XEN) Page tables: c0906000->c090a000
(XEN) Boot stack: c090a000->c090b000
(XEN) TOTAL: c0000000->c0c00000
(XEN) ENTRY ADDRESS: c0100000
(XEN) Dom0 has maximum 2 VCPUs
(XEN) Initrd len 0x3a0e00, start at 0xc0479000
(XEN) Scrubbing Free RAM: ...........done.
(XEN) Xen trace buffers: disabled
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input
to Xen).
Linux version 2.6.16.29-xen (shand@endor) (gcc version 3.4.4 20050314
(prerelease) (Debian
3.4.3-13)) #5 SMP Sun Oct 15 13:23:34 BST 2006 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000003b2d9000 (usable) 114MB HIGHMEM available. 831MB LOWMEM available. found SMP MP-table at 000f64d0 DMI present. ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelistsKernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,9600 console=tty0 selinux=0 ramdisk_size=32758 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 9363.144 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB enabled: Aperture: 2 megabytes Kernel range: 0x00000000c09ff000 - 0x00000000c0bff000 vmalloc area: f4800000-fb7fe000, maxmem 33ffe000Memory: 940104k/969572k available (1955k kernel code, 20672k reserved, 752k data, 188k init, 117612k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay using timer specific routine.. 5542.50 BogoMIPS (lpj=27712530) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512K Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs Enabling SMP... Initializing CPU#1 Brought up 2 CPUs migration_cost=9 checking if image is initramfs... it is Freeing initrd memory: 3715k freed Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 14 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 13 devices xen_mem: Initialising balloon driver. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Bridge: 0000:01:1d.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:01:1f.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: fc100000-fc1fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 7000-7fff MEM window: fc200000-fdffffff PREFETCH window: 50000000-500fffff Simple Boot Flag at 0x35 set to 0x1 IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx> audit: initializing netlink socket (disabled) audit(1162307471.039:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Floppy drive(s): fd0 is 1.44MTimer ISR/0: Time went backwards: delta=-10041940 delta_cpu=19958060 shadow=6488683338 off=800829825 processed=7299554859 cpu_processed=7269554859 0: 7269554859 1: 7295880586 FDC 0 is a post-1991 82077Timer ISR/0: Time went backwards: delta=-17181583 delta_cpu=12818417 shadow=6488683338 off=883690089 processed=7389554859 cpu_processed=7359554859 0: 7359554859 1: 7385880586Timer ISR/0: Time went backwards: delta=-556197212 delta_cpu=73802788 shadow=6488683338 off=954674426 processed=7999554859 cpu_processed=7369554859 0: 7369554859 1: 7995880586Timer ISR/0: Time went backwards: delta=-119906257 delta_cpu=590093743 shadow=7985138870 off=44510018 processed=8149554859 cpu_processed=7439554859 0: 7439554859 1: 8145880586Timer ISR/0: Time went backwards: delta=-130717103 delta_cpu=149282897 shadow=7985138870 off=193699150 processed=8309554859 cpu_processed=8029554859 0: 8029554859 1: 8305880586Timer ISR/0: Time went backwards: delta=-140704093 delta_cpu=159295907 shadow=7985138870 off=343712209 processed=8469554859 cpu_processed=8169554859 0: 8169554859 1: 8465880586Timer ISR/0: Time went backwards: delta=-140691522 delta_cpu=159308478 shadow=7985138870 off=493724725 processed=8619554859 cpu_processed=8319554859 0: 8319554859 1: 8615880586Timer ISR/0: Time went backwards: delta=-150677760 delta_cpu=159322240 shadow=7985138870 off=643738489 processed=8779554859 cpu_processed=8469554859 0: 8469554859 1: 8775880586Timer ISR/0: Time went backwards: delta=-150664958 delta_cpu=159335042 shadow=7985138870 off=793751291 processed=8929554859 cpu_processed=8619554859 0: 8619554859 1: 8925880586Timer ISR/0: Time went backwards: delta=-160321852 delta_cpu=159678148 shadow=7985138870 off=944094397 processed=9089554859 cpu_processed=8769554859 0: 8769554859 1: 9085880586 RAMDISK driver initialized: 16 RAM disks of 32758K size 1024 blocksize loop: loaded (max 8 devices) Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 logips2pp: Detected unknown logitech mouse model 1 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 NET: Registered protocol family 17 input: PS/2 Logitech Mouse as /class/input/input1 Using IPI No-Shortcut mode Freeing unused kernel memory: 188k freed *************************************************************** *************************************************************** ** WARNING: Currently emulating unsupported memory accesses ** ** in /lib/tls glibc libraries. The emulation is ** ** slow. To ensure full performance you should ** ** install a 'xen-friendly' (nosegneg) version of ** ** the library, or disable tls support by executing ** ** the following as root: ** ** mv /lib/tls /lib/tls.disabled ** ** Offending process: init (pid=1) ** *************************************************************** *************************************************************** Pausing... 5 Pausing... 4 <4>printk: 53 messages suppressed.Timer ISR/0: Time went backwards: delta=-130007508 delta_cpu=49992492 shadow=11558657534 off=771780783 processed=12429554859 cpu_processed=12249554859 0: 12249554859 1: 12425880586 Pausing... 3 Pausing... 2 Pausing... 1 Continuing... device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx Kernel panic - not syncing: Attempted to kill init! (XEN) Domain 0 crashed: rebooting machine in 5 seconds. *** XEN 3.0.3 DEMO CD - WORKS (Debian Dom0 non-text mode)Linux version 2.6.16.29-xen (apeace@paploo) (gcc version 4.1.2 20060901 (prerelease) (Debian 4.1.1-13)) #1 SMP Mon Oct 16 12:11:52 BST 2006 BIOS-provided physical RAM map: Xen: 0000000000000000 - 000000003b4b9000 (usable) 220MB HIGHMEM available. 727MB LOWMEM available. On node 0 totalpages: 242873 DMA zone: 186366 pages, LIFO batch:31 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 56507 pages, LIFO batch:15 found SMP MP-table at 000f64d0 DMI present. ACPI: RSDP (v000 PTLTD ) @ 0x000f6500 ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x3fef8674 ACPI: FADT (v001 Intel SE7501CW 0x06040000 PTL 0x00000008) @ 0x3fefbe94ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x3fefbf08 ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x3fefbf88 ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x3fefbfb0 ACPI: DSDT (v001 INTEL PLUMAS 0x06040000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x04] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 4, version 32, address 0xfec80400, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 3 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) Built 1 zonelistsKernel command line: ro selinux=0 ramdisk_size=32758 image=rootfs.img boot=cow quiet Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Xen reported: 2392.094 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Software IO TLB enabled: Aperture: 2 megabytes Kernel range: 0x00000000c1afb000 - 0x00000000c1cfb000 vmalloc area: ee000000-f51fe000, maxmem 2d7fe000Memory: 933788k/971492k available (1922k kernel code, 28792k reserved, 724k data, 188k init, 226028k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay using timer specific routine.. 4788.12 BogoMIPS (lpj=23940615) Security Framework v1.0.0 initialized Capability LSM initialized Mount-cache hash table entries: 512CPU: After generic identify, caps: bfebd3f1 00000000 00000000 00000000 00004400 00000000 00000000CPU: After vendor identify, caps: bfebd3f1 00000000 00000000 00000000 00004400 00000000 00000000 CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 512KCPU: After all inits, caps: bfebd3f1 00000000 00000000 00000080 00004400 00000000 00000000
Checking 'hlt' instruction... OK.
ENABLING IO-APIC IRQs
Enabling SMP...
Initializing CPU#1
Brought up 2 CPUs
migration_cost=6
checking if image is initramfs... it is
Freeing initrd memory: 11250k freed
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:04:03.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICH3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.Z000._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HLB_.Z001._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
xen_mem: Initialising balloon driver.
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:01:1d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:01:1f.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: fc100000-fc1fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 7000-7fff
MEM window: fc200000-fdffffff
PREFETCH window: 50000000-500fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
Simple Boot Flag at 0x35 set to 0x1
IA-32 Microcode Update Driver: v1.14-xen <tigran@xxxxxxxxxxx>
audit: initializing netlink socket (disabled)
audit(1162292863.160:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 32758K size 1024 blocksize
loop: loaded (max 128 devices)
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 188k freed
logips2pp: Detected unknown logitech mouse model 1
dm_mod: no version for "struct_module" found: kernel tainted.
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
input: PS/2 Logitech Mouse as /class/input/input1
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 20 (level, low) -> IRQ 16
e100: eth0: e100_probe: addr 0xfc241000, irq 16, MAC addr 00:02:B3:EA:66:32
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4-NAPI
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 23 (level, low) -> IRQ 17
e1000: 0000:04:05.0: e1000_probe: (PCI:33MHz:32-bit) 00:02:b3:ea:66:57
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
ICH3: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH3: chipset revision 2
ICH3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x6c60-0x6c67, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x6c68-0x6c6f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
USB Universal Host Controller Interface driver v2.3
hda: WDC WD1200JB-00FUA0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG CD-ROM SH-152A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006c00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hda: max request size: 512KiB
hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006c20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00006c40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: Microsoft Joliet Level 3
Unable to load NLS charset utf8
Unable to load NLS charset utf8
ISO 9660 Extensions: RRIP_1991A
Real Time Clock Driver v1.12ac
MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Oct 16 2006
tolm = 40000, remapbase = ffc000, remaplimit = 0
EDAC MC0: Giving out device to "e7xxx_edac" E7501: PCI 0000:00:00.0
ts: Compaq touchscreen protocol output
input: PC Speaker as /class/input/input2
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
8250_pnp: Unknown symbol serial8250_unregister_port
8250_pnp: Unknown symbol serial8250_register_port
hw_random hardware driver 1.0.0 loaded
8250_pnp: Unknown symbol serial8250_unregister_port
8250_pnp: Unknown symbol serial8250_register_port
*** LSPCI OUTPUT (WHEN RUNNING NON-XEN KERNEL)
# lspci -v
00:00.0 Host bridge: Intel Corporation E7501 Memory Controller Hub (rev 01)
Flags: bus master, fast devsel, latency 0
Capabilities: [40] Vendor Specific Information
00:00.1 Class ff00: Intel Corporation E7500/E7501 Host RASUM Controller
(rev 01)
Subsystem: Intel Corporation Unknown device 3425
Flags: fast devsel
00:02.0 PCI bridge: Intel Corporation E7500/E7501 Hub Interface B
PCI-to-PCI Bridge (rev 01)
(prog-if 00 [Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 32
Bus: primary=00, secondary=01, subordinate=03, sec-latency=0
Memory behind bridge: fc100000-fc1fffff
00:02.1 Class ff00: Intel Corporation E7500/E7501 Hub Interface B RASUM
Controller (rev 01)
Subsystem: Intel Corporation Unknown device 3425
Flags: fast devsel
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02)
(prog-if 00
[UHCI])
Subsystem: Intel Corporation Unknown device 3425
Flags: bus master, medium devsel, latency 0, IRQ 17
I/O ports at 6c00 [size=32]
00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02)
(prog-if 00
[UHCI])
Subsystem: Intel Corporation Unknown device 3425
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 6c20 [size=32]
00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev 02)
(prog-if 00
[UHCI])
Subsystem: Intel Corporation Unknown device 3425
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 6c40 [size=32]
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 42) (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 00007000-00007fff
Memory behind bridge: fc200000-fdffffff
Prefetchable memory behind bridge: 50000000-500fffff
00:1f.0 ISA bridge: Intel Corporation 82801CA LPC Interface Controller (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801CA Ultra ATA Storage
Controller (rev 02) (prog-
if 8a [Master SecP PriP])
Subsystem: Intel Corporation Unknown device 3425
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at <unassigned>
I/O ports at 6c60 [size=16]
Memory at 50100000 (32-bit, non-prefetchable) [size=1K]
00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02)
Subsystem: Intel Corporation Unknown device 3425
Flags: medium devsel
I/O ports at 1100 [size=32]
01:1c.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20
[IO(X)-APIC])
Subsystem: Intel Corporation Unknown device 3425
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at fc100000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] PCI-X non-bridge device
01:1d.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge (rev 04)
(prog-if 00
[Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 40
Bus: primary=01, secondary=02, subordinate=02, sec-latency=64
Capabilities: [50] PCI-X bridge device
01:1e.0 PIC: Intel Corporation 82870P2 P64H2 I/OxAPIC (rev 04) (prog-if 20
[IO(X)-APIC])
Subsystem: Intel Corporation Unknown device 3425
Flags: bus master, 66MHz, fast devsel, latency 0
Memory at fc101000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [50] PCI-X non-bridge device
01:1f.0 PCI bridge: Intel Corporation 82870P2 P64H2 Hub PCI Bridge (rev 04)
(prog-if 00
[Normal decode])
Flags: bus master, 66MHz, fast devsel, latency 40
Bus: primary=01, secondary=03, subordinate=03, sec-latency=64
Capabilities: [50] PCI-X bridge device
04:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
(prog-if 00 [VGA])
Subsystem: Intel Corporation Unknown device 3425
Flags: bus master, stepping, medium devsel, latency 66, IRQ 11
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at 7000 [size=256]
Memory at fc240000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 50000000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
04:04.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
(rev 0d)
Subsystem: Intel Corporation Unknown device 3425
Flags: bus master, medium devsel, latency 66, IRQ 20
Memory at fc241000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 7400 [size=64]
Memory at fc200000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [dc] Power Management version 2
04:05.0 Ethernet controller: Intel Corporation 82540EM Gigabit Ethernet
Controller (rev 02)
Subsystem: Intel Corporation Unknown device 3425
Flags: bus master, 66MHz, medium devsel, latency 52, IRQ 19
Memory at fc220000 (32-bit, non-prefetchable) [size=128K]
I/O ports at 7440 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
_______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |