|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Using Xen HVM on Ubuntu Edgy
Of course. Here is my conf file :
-------------------------------------
# -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is
created using 'xm create'.
# You use a separate script for each domain you want to
create, or
# you can set the parameters for the domain on the xm command
line.
#============================================================================
import os, re
arch = os.uname()[4]
if re.search('64', arch):
arch_libdir = 'lib64'
else:
arch_libdir = 'lib'
#----------------------------------------------------------------------------
# Kernel image file.
#kernel = "/usr/lib/xen/boot/hvmloader"
kernel = "/usr/lib/xen-ioemu-3.0/boot/hvmloader"
# The domain build function. HVM domain uses 'hvm'.
builder='hvm'
# Initial memory allocation (in megabytes) for the new domain.
#
# WARNING: Creating a domain with insufficient memory may
cause out of
# memory errors. The domain needs enough memory to
boot kernel
# and modules. Allocating less than 32MBs is not
recommended.
memory = 512
# Shadow pagetable memory for the domain, in MB.
# Should be at least 2KB per MB of domain memory, plus a few
MB per vcpu.
shadow_memory = 8
# A name for your domain. All domains must have different names.
name = "HVMDomain"
# 128-bit UUID for the domain. The default behavior is to
generate a new UUID
# on each call to 'xm create'.
#uuid = "06ed00fe-1162-4fc4-b5d8-11993ee4a8b9"
#-----------------------------------------------------------------------------
# the number of cpus guest platform has, default=1
vcpus=2
# enable/disable HVM guest PAE, default=0 (disabled)
#pae=0
# enable/disable HVM guest ACPI, default=0 (disabled)
#acpi=0
# enable/disable HVM guest APIC, default=0 (disabled)
#apic=0
# List of which CPUS this domain is allowed to use, default
Xen picks
#cpus = "" # leave to Xen to pick
#cpus = "0" # all vcpus run on CPU0
#cpus = "0-3,5,^1" # run on cpus 0,2,3,5
# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
#vif = [ 'type=ioemu, mac=00:16:3e:00:00:11, bridge=xenbr0,
model=ne2k_pci' ]
# type=ioemu specify the NIC is an ioemu device not netfront
vif = [ 'type=ioemu, bridge=xenbr0' ]
#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access
to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain
will see,
# and MODE is r for read-only, w for read-write.
#disk = [ 'phy:hda1,hda1,r' ]
disk = [ 'file:/home/laurent/VM/srvappli.img,hda,w',
',hdc:cdrom,r' ]
#----------------------------------------------------------------------------
# Configure the behaviour when a domain exits. There are
three 'reasons'
# for a domain to stop: poweroff, reboot, and crash. For each
of these you
# may specify:
#
# "destroy", meaning that the domain is cleaned up as
normal;
# "restart", meaning that a new domain is started in
place of the old
# one;
# "preserve", meaning that no clean-up is done until
the domain is
# manually destroyed (using xm destroy,
for example); or
# "rename-restart", meaning that the old domain is not
cleaned up, but is
# renamed and a new domain started in its
place.
#
# The default is
#
# on_poweroff = 'destroy'
# on_reboot = 'restart'
# on_crash = 'restart'
#
# For backwards compatibility we also support the deprecated
option restart
#
# restart = 'onreboot' means on_poweroff = 'destroy'
# on_reboot = 'restart'
# on_crash = 'destroy'
#
# restart = 'always' means on_poweroff = 'restart'
# on_reboot = 'restart'
# on_crash = 'restart'
#
# restart = 'never' means on_poweroff = 'destroy'
# on_reboot = 'destroy'
# on_crash = 'destroy'
#on_poweroff = 'destroy'
#on_reboot = 'restart'
#on_crash = 'restart'
#============================================================================
# New stuff
device_model = '/usr/' + arch_libdir + '/xen/bin/qemu-dm'
#-----------------------------------------------------------------------------
# boot on floppy (a), hard disk (c) or CD-ROM (d)
# default: hard disk, cd-rom, floppy
#boot="cda"
boot="cda"
#-----------------------------------------------------------------------------
# write to temporary files instead of disk image files
#snapshot=1
#----------------------------------------------------------------------------
# enable SDL library for graphics, default = 0
sdl=1
#----------------------------------------------------------------------------
# enable VNC library for graphics, default = 1
vnc=0
#----------------------------------------------------------------------------
# address that should be listened on for the VNC server if vnc
is set.
# default is to use 'vnc-listen' setting from
/etc/xen/xend-config.sxp
#vnclisten="127.0.0.1"
#----------------------------------------------------------------------------
# set VNC display number, default = domid
#vncdisplay=1
#----------------------------------------------------------------------------
# try to find an unused port for the VNC server, default = 1
#vncunused=1
#----------------------------------------------------------------------------
# enable spawning vncviewer for domain's console
# (only valid when vnc=1), default = 0
#vncconsole=0
#----------------------------------------------------------------------------
# no graphics, use serial port
#nographic=0
#----------------------------------------------------------------------------
# enable stdvga, default = 0 (use cirrus logic device model)
stdvga=0
#-----------------------------------------------------------------------------
# serial port re-direct to pty deivce, /dev/pts/n
# then xm console or minicom can connect
serial='pty'
#-----------------------------------------------------------------------------
# enable sound card support, [sb16|es1370|all|..,..],
default none
#soundhw='sb16'
#-----------------------------------------------------------------------------
# set the real time clock to local time [default=0 i.e. set
to utc]
#localtime=1
#-----------------------------------------------------------------------------
# start in full screen
#full-screen=1
#-----------------------------------------------------------------------------
# Enable USB support (specific devices specified at runtime
through the
# monitor window)
#usb=1
# Enable USB mouse support (only enable one of the
following, `mouse' for
# PS/2 protocol relative mouse, `tablet' for
# absolute mouse)
#usbdevice='mouse'
#usbdevice='tablet'
-------------------------------------
> Can you paste your .conf for the virtual machine ?
>
>
> On 10/28/06, lflesch.domicile@xxxxxxxxxxx
<lflesch.domicile@xxxxxxxxxxx> wrote:
> >
> >
> > Hello,
> >
> > I'm trying to user Xen and HVM support on my new Edgy
> > installation.
> > My config : AMD 3800+ Dual Core.
> > SVM support is ok.
> >
> > I installed xen following the tuto on Ubuntu.com :
"XenOnEdgy" and
> > after that installed xen-ioemu-3.0 for hvm support.
> >
> > I set my srv.hvm config file (in order to boot on CDROM) and
> > after that : xm create srv.hvm.
> > The new domain appears in xentop list but nothing happens : no
> > window opens and no CDROM activity.
> >
> > xen logs don't show any error.
> >
> > Did you have some advice to progress ?
> >
> > Tnaks a lot for your help !
> >
> > Accédez au courrier électronique de La Poste
> > sur www.laposte.net ou sur 3615 LAPOSTENET (0,34? TTC /mn)
> > 1 Giga de stockage gratuit - Antispam et antivirus intégrés
> >
> >
> >
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
> >
>
Accédez au courrier électronique de La Poste
sur www.laposte.net ou sur 3615 LAPOSTENET (0,34? TTC /mn)
1 Giga de stockage gratuit ? Antispam et antivirus intégrés
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |