|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] VM boots BUT keep throwing: "INIT: Id "X" respawning too fast: disabled for 5 minutes"
On Thu, 2006-07-06 at 21:34 -0400, John A. Sullivan III wrote: On Thu, 2006-07-06 at 17:52 -0700, Castillo, Claris wrote: > Hi, > > This is my setting: > > I have a Logical Volume /dev/VG/suse with Suse installed. I have added > it to the grub and I can boot it and works perfectly fine. > > Now I am running /dev/VG/root which is running Xen0. I have created a > Xen config file to boot a VM with disk: /dev/VG/suse. In other words I > want to boot > > /dev/VG/suse as a virtual machine. > > > > Below is what I am getting at boot time : > > > > > > > > done > > Setting up the hardware clockmodprobe: FATAL: Could not > load /lib/modules/2.6.13-15.8-xen/modules.dep: No such file or > directory > > > > > failed > > Activating remaining swap-devices in /etc/fstab... > failed > > Setting current sysctl status from /etc/sysctl.conf > > net.ipv4.icmp_echo_ignore_broadcasts = 1 > > net.ipv4.conf.all.rp_filter = 1 > > > done > > Enabling syn flood protection > done > > Disabling IP forwarding > done > > > done > > > done > > System Boot Control: The system has been > set up > > Failed features: > boot.udev > > System Boot Control: Running /etc/init.d/boot.local > done > > INIT: Entering runlevel: 5 > > Boot logging started on /dev/tty1(/dev/console) at Fri Jul 7 01:35:48 > 2006 > > Master Resource Control: previous runlevel: N, switching to runlevel: > 5 > > acpid: no ACPI support in kernel > skipped > > FATAL: Could not load /lib/modules/2.6.13-15.8-xen/modules.dep: No > such file or directory > > Loading AppArmor module > failed > > - could not start AppArmor > failed > > Starting D-BUS daemonUnknown username "haldaemon" in message bus > configuration file > > > failed > > Starting syslog services > done > > Starting irqbalance > unused > > Initializing random number generator > done > > Starting resource manager > done > > Loading keymap Couldnt open /dev/tty1 > > Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz > failed > > Loading compose table winkeys shiftctrl latin1.add > failed > > Start Unicode mode > > Couldnt open /dev/tty1 > failed > > Loading console font lat9w-16.psfu -m trivial G0:loadable > > Couldnt open /dev/tty1 > failed > > Couldnt get a file descriptor referring to the console > > Starting HAL daemon > done > > Setting up network interfaces: > > lo > > lo IP address: 127.0.0.1/8 > done > > veth0 > > No configuration found for veth0 > unused > > veth1 > > No configuration found for veth1 > unused > > veth2 > > No configuration found for veth2 > unused > > veth3 > > No configuration found for veth3 > unused > > veth4 > > No configuration found for veth4 > unused > > veth5 > > No configuration found for veth5 > unused > > veth6 > > No configuration found for veth6 > unused > > veth7 > > No configuration found for veth7 > unused > > vif0.0 > > No configuration found for vif0.0 > unused > > vif0.1 > > No configuration found for vif0.1 > unused > > vif0.2 > > No configuration found for vif0.2 > unused > > vif0.3 > > No configuration found for vif0.3 > unused > > vif0.4 > > No configuration found for vif0.4 > unused > > vif0.5 > > No configuration found for vif0.5 > unused > > vif0.6 > > No configuration found for vif0.6 > unused > > vif0.7 > > No configuration found for vif0.7 > unused > > Waiting for mandatory devices: eth0 __NSC__ > > 19 18 16 15 14 13 > > eth0 > > eth0 IP address: 172.25.95.209/24 > done > > Setting up service network . . . . . . . . . . . . . . > done > > Starting mdnsd > failed > > Starting RPC portmap daemon > done > > Importing Net File System (NFS) > unused > > Starting ZENworks Management Daemon > done > > Starting auditd > done > > Starting service at daemon > done > > Loading keymap Couldnt open /dev/tty1 > > Loading /usr/share/kbd/keymaps/i386/qwerty/us.map.gz > failed > > Loading compose table winkeys shiftctrl latin1.add > failed > > Start Unicode mode > > Couldnt open /dev/tty1 > failed > > Loading console font lat9w-16.psfu -m trivial G0:loadable > > Couldnt open /dev/tty1 > failed > > Couldnt get a file descriptor referring to the console > > Checking/updating CPU microcode FATAL: Could not > load /lib/modules/2.6.13-15.8-xen/modules.dep: No such file or > directory > > FATAL: Could not load /lib/modules/2.6.13-15.8-xen/modules.dep: No > such file or directory > > > failed > > Starting nfsboot (sm-notify) > done > > Starting cupsd > done > > Starting Name Service Cache Daemon > done > > Starting mail service (Postfix) > failed > > Starting CRON daemon > done > > Mount SMB/ CIFS File Systems > unused > > Starting powersaved: > done > > Starting SSH daemon > done > > Starting service kdm > done > > Starting automount: > > Starting X Font Server > done > > /etc/init.d/local: line > 30: /ulm/tmp/CLIENTS/NVIDIA/nvidia_postcheck_Suse: No such file or > directory > > /usr/local/nm/nm5/nmetrics/nmd not installed > > Starting INET services. (xinetd) > done > > > done > > Master Resource Control: runlevel 5 has been > reached > > Failed services in runlevel 5: dbus earlykbd mdnsd kbd microcode > postfix > > Skipped services in runlevel 5: acpid irq_balancer nfs smbfs splash > netmeter > > > > > > Welcome to SUSE LINUX 10.1 (i586) - Kernel 2.6.13-15.8-xen (tty1). > > > > > > INIT: Id "2" respawning too fast: disabled for 5 minutes > > INIT: Id "3" respawning too fast: disabled for 5 minutes > > INIT: Id "4" respawning too fast: disabled for 5 minutes > > INIT: Id "5" respawning too fast: disabled for 5 minutes > > INIT: Id "6" respawning too fast: disabled for 5 minutes > > > > > > > > Welcome to SUSE LINUX 10.1 (i586) - Kernel 2.6.13-15.8-xen (tty1). > > > > ----------------------------------------------------------------- > > Once I log in as root I keep getting the following message ( > > INIT: Id "2" respawning too fast: disabled for 5 minutes > > INIT: Id "3" respawning too fast: disabled for 5 minutes > > INIT: Id "4" respawning too fast: disabled for 5 minutes > > INIT: Id "5" respawning too fast: disabled for 5 minutes > > INIT: Id "6" respawning too fast: disabled for 5 minutes > > > > > > Any ideas? <snip> I apologize in advance for not reading your entire post but work deadlines are drawing ever nearer ;) However, look for a section like this in your /etc/inittab file: # Run gettys in standard runlevels 1:2345:respawn:/sbin/mingetty tty1 2:2345:respawn:/sbin/mingetty tty2 3:2345:respawn:/sbin/mingetty tty3 4:2345:respawn:/sbin/mingetty tty4 5:2345:respawn:/sbin/mingetty tty5 6:2345:respawn:/sbin/mingetty tty6 I'm guessing that it is having trouble finding tty2 through tty6 but that is just a guess. Hopefully someone with more expertise will answer soon! - John > I am getting similar errors as well while trying to launch my Suse 10.0 vm under SLES 10. Can anyone else shed some light on this issue or how I can debug this problem ? cheers, Jeffery _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |