Re: [Xen-users] No network on DomU

[John Smith <netman1@xxxxxxx>]

Hiamal Llanos wrote:
> Hi!
> 
> On 10/1/06, *John Smith* <netman1@xxxxxxx <mailto:netman1@xxxxxxx>> wrote:
> 
>     Hiamal Llanos wrote:
>     > Hi,
>     >
>     > I have problems getting xenbr0 up in dom0 and which means that I don't
>     > have any network interface in domU.
>     > I tested different solutions presented on the list but none of those
>     > worked for me :-(
> 
> 
> ...
> 
>     Hi Hiamal,
> 
>             try putting netloop in your /etc/modules and restarting. If
>     it still does not work, run /etc/xen/scripts/network-<your flavour>
>     manually.
> 
> 
> Thanks John, that got me a bit further.
> 
> Now I have vif0.0 but no xenbr0. To get it working correctly I have to
> do the following, after a reboot:
> 
> $ sudo /etc/init.d/xendomains stop
> $ sudo /etc/init.d/xend stop
> $ sudo /etc/xen/scripts/network-bridge stop
> $ sudo /etc/xen/scripts/network-bridge start vif0.0
> $ sudo /etc/init.d/xend start
> $ sudo /etc/init.d/xendomains start
> 
> So now I have peth0, vif0.0 and xenbr0
> And addind vif = [''] to /etc/xen/sarge gawe my back eth0 on domU.
> 
> But...wy dosn't xenbr0 get createt on system boot? What I'm missing?
> Must I change something in /etc/xen/xend- config.sxp?:
> 
> (logfile /var/log/xen/xend.log)
> (loglevel DEBUG)
> (xend-http-server yes)
> (xend-relocation-server yes)
> (xend-port            8000)
> (xend-relocation-port 8002)
> (xend-address localhost)
> (xend-relocation-address localhost)
> (network-script network-dummy)
> (network-script 'network-bridge netdev=eth0')
> (network-script 'network-bridge bridge=xenbr0')
> (vif-script vif-bridge)
> (dom0-min-mem 64)
> (dom0-cpus 0)
> 
> 
> 
> Thanks
> Hiamal
>  **
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

Hiamal,


   I think those network-script entries in your config are
conflicting: as far as I know you can only have one.

   Here is my xen-config.sxp;

(xend-relocation-server no)
(xend-relocation-hosts-allow '')
(network-script 'network-bridge netdev=eth0')
(vif-script vif-bridge)
(dom0-min-mem 196)
(dom0-cpus 0)

Sincerely,

Jan.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users