[Xen-users] domU networking not working

[Nick Anderson <nick@xxxxxxxxxxxx>]

Hello,

Ive got a dom0 working on gentoo. I have a domU booting (with gentoo also). '
I cannot for the life of me seem to get  dom0 or the rest of my network 
communicating with domU.

brctl show
bridge name     bridge id               STP enabled     interfaces
xenbr0          8000.feffffffffff       no              vif3.0

ifconfig for dom0
eth0      Link encap:Ethernet  HWaddr 00:04:23:B7:9F:04
          inet addr:192.168.1.229  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::204:23ff:feb7:9f04/64 Scope:Link
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2674 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1391 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:371583 (362.8 Kb)  TX bytes:239364 (233.7 Kb)
          Base address:0xd880 Memory:fcfa0000-fcfc0000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

vif3.0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:684 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:6 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:31684 (30.9 Kb)  TX bytes:0 (0.0 b)

xenbr0    Link encap:Ethernet  HWaddr FE:FF:FF:FF:FF:FF
          inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:684 errors:0 dropped:0 overruns:0 frame:0
          TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:22108 (21.5 Kb)  TX bytes:468 (468.0 b)

ifconfig for domU
eth0      Link encap:Ethernet  HWaddr 00:16:3E:7B:BD:C8
          inet addr:192.168.1.222  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::216:3eff:fe7b:bdc8/64 Scope:Link
          UP BROADCAST NOTRAILERS RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:684 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:31684 (30.9 Kb)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:669 errors:0 dropped:0 overruns:0 frame:0
          TX packets:669 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:74928 (73.1 Kb)  TX bytes:74928 (73.1 Kb)

Trying to ping dom0 from domU
ping 192.168.1.229
PING 192.168.1.229 (192.168.1.229) 56(84) bytes of data.
From 192.168.1.222 icmp_seq=1 Destination Host Unreachable
From 192.168.1.222 icmp_seq=2 Destination Host Unreachable
From 192.168.1.222 icmp_seq=3 Destination Host Unreachable

Trying to ping domU from dom0
ping 192.168.1.222
PING 192.168.1.222 (192.168.1.222) 56(84) bytes of data.
From 192.168.1.229 icmp_seq=1 Destination Host Unreachable
From 192.168.1.229 icmp_seq=2 Destination Host Unreachable
From 192.168.1.229 icmp_seq=3 Destination Host Unreachable

I did try ethtool -K iface tx off on every interface for dom0 and domU

Any ideas?
Oh, btw this is on an x86_64 box.

Thanks
Nick

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users