[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] Broadcom Corporation NetXtreme II BCM5708 bnx2 bridging problem
On Mon, Aug 21, 2006 at 09:27:23AM -0500, Mike Freemon wrote: > This may be relevant: > > http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround It most certainly was relevant, that sorted the problem - much appreciated. Cheers -- Pete > At 8/18/2006 09:40 AM Friday, Peter McEvoy wrote: > >Hi, > >I've run into the same issue as: > > > >http://lists.xensource.com/archives/html/xen-users/2006-07/msg00599.html > > > >In that, running the network bridge script kills networking completely, > >trying to ping the gateway gives me destination host unreachable. > > > >The card is: > > > >09:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 > >Gigabit Ethernet (rev 11) > > > >Using the bnx2 module: > > > >filename: /lib/modules/2.6.16-2-xen-686/kernel/drivers/net/bnx2.ko > >version: 1.4.31 > >license: GPL > >description: Broadcom NetXtreme II BCM5706/5708 Driver > >author: Michael Chan <mchan@xxxxxxxxxxxx> > >srcversion: E70D1EF4482674DE649B19D > >alias: pci:v000014E4d000016ACsv*sd*bc*sc*i* > >alias: pci:v000014E4d000016AAsv*sd*bc*sc*i* > >alias: pci:v000014E4d000016AAsv0000103Csd00003102bc*sc*i* > >alias: pci:v000014E4d0000164Csv*sd*bc*sc*i* > >alias: pci:v000014E4d0000164Asv*sd*bc*sc*i* > >alias: pci:v000014E4d0000164Asv0000103Csd00003106bc*sc*i* > >alias: pci:v000014E4d0000164Asv0000103Csd00003101bc*sc*i* > >depends: > >vermagic: 2.6.16-2-xen-686 SMP 686 gcc-4.0 > >parm: disable_msi:Disable Message Signaled Interrupt (MSI) > >(int) > > > >from the debian xen kernel: > > > >Linux xen 2.6.16-2-xen-686 #1 SMP Sun Jul 16 01:42:25 UTC 2006 i686 > >GNU/Linux > > > >In a dell poweredge 1950 > > > >If I swap eth0 from the broadcom to a usb ethernet card using the > >rtl8150 driver, the bridging works immediately. > > > >I'm using the debian sid xen packages xen-utils 3.0.2+hg9697-2 > > > >I've put a tcpdump prepared for ethereal from the xen dom0 here: > > > >http://www.yerma.org/~pete/temp/xen/dom0 > > > >And one from the gateway here: > > > >http://www.yerma.org/~pete/temp/xen/gateway > > > >Obviously I can work around this using the usb ethernet card, but I'd > >prefer to use the gigabit nics that I've paid for. > > > >Thanks. > > > >-- > >Pete > > > >_______________________________________________ > >Xen-users mailing list > >Xen-users@xxxxxxxxxxxxxxxxxxx > >http://lists.xensource.com/xen-users > > > _______________________________________________ > Xen-users mailing list > Xen-users@xxxxxxxxxxxxxxxxxxx > http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |