[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] DomU WinXP no network connection


  • To: "Simon Gao" <gao@xxxxxxxxxxxxxxx>, <xen-users@xxxxxxxxxxxxxxxxxxx>
  • From: "Zhao, Yunfeng" <yunfeng.zhao@xxxxxxxxx>
  • Date: Fri, 21 Jul 2006 16:27:26 +0800
  • Delivery-date: Fri, 21 Jul 2006 01:31:11 -0700
  • List-id: Xen user discussion <xen-users.lists.xensource.com>
  • Thread-index: AcasngQ7z8FAwHv4RWKotW1VOENhBQAAQL7A
  • Thread-topic: [Xen-users] DomU WinXP no network connection

Did you check if the guest got dynamic ip?


Thanks
Yunfeng

>-----Original Message-----
>From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
>[mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Simon Gao
>Sent: 2006年7月21日 16:16
>To: xen-users@xxxxxxxxxxxxxxxxxxx
>Subject: [Xen-users] DomU WinXP no network connection
>
>Hi,
>
>Just installed Windows XP on Gentoo 2006.0 with VT support. WinXP boots
>up ok and virtual network interface is configured, but can't connect to
>anywhere even to dom0.
>
>Here are config file for domU WinXP and some logs. Any help is appreciated.
>
>Simon Gao
>
>===================================
>kernel = "/usr/lib/xen/boot/hvmloader"
>builder='hvm'
>memory = 512
>name = "WinXP"
>vif = [ 'type=ioemu, bridge=xenbr0' ]
>disk = [ 'file:/vms/xms/windisk.img,ioemu:hda,w' ]
>on_poweroff = 'destroy'
>on_reboot   = 'destroy'
>on_crash    = 'destroy'
>device_model = '/usr/lib/xen/bin/qemu-dm'
>#cdrom='/images/winxp/winxp_sp2.iso'
>boot='c'
>sdl=1
>vnc=0
>vncviewer=0
>===================================
>
># dmesg
>
>....
>xenbr0: port 3(vif1.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif1.0) entering forwarding state
>xenbr0: port 3(vif1.0) entering disabled state
>device vif1.0 left promiscuous mode
>xenbr0: port 3(vif1.0) entering disabled state
>device vif2.0 entered promiscuous mode
>xenbr0: port 3(vif2.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif2.0) entering forwarding state
>xenbr0: port 3(vif2.0) entering disabled state
>device vif2.0 left promiscuous mode
>xenbr0: port 3(vif2.0) entering disabled state
>device vif3.0 entered promiscuous mode
>xenbr0: port 3(vif3.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif3.0) entering forwarding state
>xenbr0: port 3(vif3.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif3.0) entering forwarding state
>xenbr0: port 3(vif3.0) entering disabled state
>device vif3.0 left promiscuous mode
>xenbr0: port 3(vif3.0) entering disabled state
>device vif4.0 entered promiscuous mode
>xenbr0: port 3(vif4.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif4.0) entering forwarding state
>xenbr0: port 3(vif4.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif4.0) entering forwarding state
>xenbr0: port 3(vif4.0) entering disabled state
>device vif4.0 left promiscuous mode
>xenbr0: port 3(vif4.0) entering disabled state
>device vif6.0 entered promiscuous mode
>xenbr0: port 3(vif6.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif6.0) entering forwarding state
>
>
># xm dmesg
> __  __            _____  ___   ____
> \ \/ /___ _ __   |___ / / _ \ |___ \
>  \  // _ \ '_ \    |_ \| | | |  __) |
>  /  \  __/ | | |  ___) | |_| | / __/
> /_/\_\___|_| |_| |____(_)___(_)_____|
>
> http://www.cl.cam.ac.uk/netos/xen
> University of Cambridge Computer Laboratory
>
> Xen version 3.0.2 (root@xxxxxxxxxx) (gcc version 3.4.5 (Gentoo
>3.4.5-r1, ssp-3.4.5-1.0, pie-8.7.9)) Sat Apr 22 22:02:54 PDT 2006
> Latest ChangeSet: Sat Apr  8 12:14:27 2006 +0100 9598:1bce05ff1e52
>
>(XEN) Physical RAM map:
>(XEN)  0000000000000000 - 000000000009f000 (usable)
>(XEN)  000000000009f000 - 00000000000a0000 (reserved)
>(XEN)  0000000000100000 - 000000007fe91400 (usable)
>(XEN)  000000007fe91400 - 0000000080000000 (reserved)
>(XEN)  00000000e0000000 - 00000000f0007000 (reserved)
>(XEN)  00000000f0008000 - 00000000f000c000 (reserved)
>(XEN)  00000000fec00000 - 00000000fec10000 (reserved)
>(XEN)  00000000fed20000 - 00000000feda0000 (reserved)
>(XEN)  00000000fee00000 - 00000000fee10000 (reserved)
>(XEN)  00000000ffb00000 - 0000000100000000 (reserved)
>(XEN) System RAM: 2046MB (2095296kB)
>(XEN) Xen heap: 10MB (10572kB)
>(XEN) Using scheduler: Simple EDF Scheduler (sedf)
>(XEN) PAE disabled.
>(XEN) DMI 2.4 present.
>(XEN) Using APIC driver default
>(XEN) ACPI: RSDP (v000 DELL                                  ) @ 0x000fc370
>(XEN) ACPI: RSDT (v001 DELL    M07     0x27d60317 ASL  0x00000061) @
>0x7fe91a11
>(XEN) ACPI: FADT (v001 DELL    M07     0x27d60317 ASL  0x00000061) @
>0x7fe92800
>(XEN) ACPI: MADT (v001 DELL    M07     0x27d60317 ASL  0x00000047) @
>0x7fe93000
>(XEN) ACPI: ASF! (v016 DELL    M07     0x27d60317 ASL  0x00000061) @
>0x7fe92c00
>(XEN) ACPI: MCFG (v016 DELL    M07     0x27d60317 ASL  0x00000061) @
>0x7fe92fc0
>(XEN) ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @
>0x7fe91a8c
>(XEN) ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @
>0x00000000
>(XEN) ACPI: Local APIC address 0xfee00000
>(XEN) ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>(XEN) Processor #0 6:14 APIC version 20
>(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>(XEN) Processor #1 6:14 APIC version 20
>(XEN) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>(XEN) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>(XEN) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>(XEN) ACPI: IRQ0 used by override.
>(XEN) ACPI: IRQ2 used by override.
>(XEN) ACPI: IRQ9 used by override.
>(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
>(XEN) Using ACPI (MADT) for SMP configuration information
>(XEN) Initializing CPU#0
>(XEN) Detected 1997.384 MHz processor.
>(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>(XEN) CPU: L2 cache: 2048K
>(XEN) CPU: Physical Processor ID: 0
>(XEN) CPU: Processor Core ID: 0
>(XEN) VMXON is done
>(XEN) Intel machine check architecture supported.
>(XEN) Intel machine check reporting enabled on CPU#0.
>(XEN) CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz
>stepping 08
>(XEN) Booting processor 1/1 eip 90000
>(XEN) Initializing CPU#1
>(XEN) CPU: L1 I cache: 32K, L1 D cache: 32K
>(XEN) CPU: L2 cache: 2048K
>(XEN) CPU: Physical Processor ID: 0
>(XEN) CPU: Processor Core ID: 1
>(XEN) VMXON is done
>(XEN) Intel machine check architecture supported.
>(XEN) Intel machine check reporting enabled on CPU#1.
>(XEN) CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz
>stepping 08
>(XEN) Total of 2 processors activated.
>(XEN) ENABLING IO-APIC IRQs
>(XEN) ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>(XEN) checking TSC synchronization across 2 CPUs:
>(XEN) CPU#0 had 0 usecs TSC skew, fixed it up.
>(XEN) CPU#1 had 1274465 usecs TSC skew, fixed it up.
>(XEN) Platform timer is 1.193MHz PIT
>(XEN) Brought up 2 CPUs
>(XEN) Machine check exception polling timer started.
>(XEN) Using IPI Shortcut mode
>(XEN) *** LOADING DOMAIN 0 ***
>(XEN) Domain 0 kernel supports features = { 0000001f }.
>(XEN) Domain 0 kernel requires features = { 00000000 }.
>(XEN) PHYSICAL MEMORY ARRANGEMENT:
>(XEN)  Dom0 alloc.:   7f000000->7f800000 (128983 pages to be allocated)
>(XEN) VIRTUAL MEMORY ARRANGEMENT:
>(XEN)  Loaded kernel: c0100000->c044463c
>(XEN)  Init. ramdisk: c0445000->c0445000
>(XEN)  Phys-Mach map: c0445000->c04c4f5c
>(XEN)  Start info:    c04c5000->c04c6000
>(XEN)  Page tables:   c04c6000->c04c9000
>(XEN)  Boot stack:    c04c9000->c04ca000
>(XEN)  TOTAL:         c0000000->c0800000
>(XEN)  ENTRY ADDRESS: c0100000
>(XEN) Dom0 has maximum 2 VCPUs
>(XEN) Scrubbing Free RAM: .....................done.
>(XEN) Xen trace buffers: disabled
>(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch
>input to Xen).
>(XEN) (GUEST: 2) HVM Loader
>(XEN) (GUEST: 2) Loading ROMBIOS ...
>(XEN) (GUEST: 2) Loading Cirrus VGABIOS ...
>(XEN) (GUEST: 2) Loading VMXAssist ...
>(XEN) (GUEST: 2) VMX go ...
>(XEN) (GUEST: 2) VMXAssist (Jun  9 2006)
>(XEN) (GUEST: 2) Memory size 256 MB
>(XEN) (GUEST: 2) E820 map:
>(XEN) (GUEST: 2) 0000000000000000 - 000000000009F800 (RAM)
>(XEN) (GUEST: 2) 000000000009F800 - 00000000000A0000 (Reserved)
>(XEN) (GUEST: 2) 00000000000A0000 - 00000000000C0000 (Type 16)
>(XEN) (GUEST: 2) 00000000000F0000 - 0000000000100000 (Reserved)
>(XEN) (GUEST: 2) 0000000000100000 - 000000000FFFE000 (RAM)
>(XEN) (GUEST: 2) 000000000FFFE000 - 000000000FFFF000 (Type 18)
>(XEN) (GUEST: 2) 000000000FFFF000 - 0000000010000000 (Type 17)
>(XEN) (GUEST: 2) 0000000010000000 - 0000000010003000 (ACPI NVS)
>(XEN) (GUEST: 2) 0000000010003000 - 000000001000D000 (ACPI Data)
>(XEN) (GUEST: 2) 00000000FEC00000 - 0000000100000000 (Type 16)
>(XEN) (GUEST: 2)
>(XEN) (GUEST: 2) Start BIOS ...
>(XEN) (GUEST: 2) Starting emulated 16-bit real-mode: ip=F000:FFF0
>(XEN) (GUEST: 2)  rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
>(XEN) HVM_PIT: guest freq in cycles=99869116
>(XEN) (GUEST: 2) Remapping master: ICW2 0x8 -> 0x20
>(XEN) (GUEST: 2) Remapping slave: ICW2 0x70 -> 0x28
>(XEN) (GUEST: 2) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>vruppert Exp $
>(XEN) (GUEST: 2) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
>2005/05/07 15:55:26 $
>(XEN) (GUEST: 2)
>(XEN) (GUEST: 2) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63
>(XEN) (GUEST: 2) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes)
>(XEN) (GUEST: 2) ata0  slave: Unknown device
>(XEN) (GUEST: 2) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
>(XEN) (GUEST: 2) ata1  slave: Unknown device
>(XEN) (GUEST: 2)
>(XEN) (GUEST: 2) Booting from CD-Rom...
>(XEN) (GUEST: 2) unsupported PCI BIOS function 0x0E
>(XEN) (GUEST: 2) int13_harddisk: function 15, unmapped device for ELDL=81
>(XEN) (GUEST: 2) KBD: int09h_handler(): unknown scancode read!
>(XEN) HVM_PIT: guest freq in cycles=20002616
>(XEN) (GUEST: 3) HVM Loader
>(XEN) (GUEST: 3) Loading ROMBIOS ...
>(XEN) (GUEST: 3) Loading Cirrus VGABIOS ...
>(XEN) (GUEST: 3) Loading VMXAssist ...
>(XEN) (GUEST: 3) VMX go ...
>(XEN) (GUEST: 3) VMXAssist (Jun  9 2006)
>(XEN) (GUEST: 3) Memory size 256 MB
>(XEN) (GUEST: 3) E820 map:
>(XEN) (GUEST: 3) 0000000000000000 - 000000000009F800 (RAM)
>(XEN) (GUEST: 3) 000000000009F800 - 00000000000A0000 (Reserved)
>(XEN) (GUEST: 3) 00000000000A0000 - 00000000000C0000 (Type 16)
>(XEN) (GUEST: 3) 00000000000F0000 - 0000000000100000 (Reserved)
>(XEN) (GUEST: 3) 0000000000100000 - 000000000FFFE000 (RAM)
>(XEN) (GUEST: 3) 000000000FFFE000 - 000000000FFFF000 (Type 18)
>(XEN) (GUEST: 3) 000000000FFFF000 - 0000000010000000 (Type 17)
>(XEN) (GUEST: 3) 0000000010000000 - 0000000010003000 (ACPI NVS)
>(XEN) (GUEST: 3) 0000000010003000 - 000000001000D000 (ACPI Data)
>(XEN) (GUEST: 3) 00000000FEC00000 - 0000000100000000 (Type 16)
>(XEN) (GUEST: 3)
>(XEN) (GUEST: 3) Start BIOS ...
>(XEN) (GUEST: 3) Starting emulated 16-bit real-mode: ip=F000:FFF0
>(XEN) (GUEST: 3)  rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
>(XEN) HVM_PIT: guest freq in cycles=99869116
>(XEN) (GUEST: 3) Remapping master: ICW2 0x8 -> 0x20
>(XEN) (GUEST: 3) Remapping slave: ICW2 0x70 -> 0x28
>(XEN) (GUEST: 3) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>vruppert Exp $
>(XEN) (GUEST: 3) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
>2005/05/07 15:55:26 $
>(XEN) (GUEST: 3)
>(XEN) (GUEST: 3) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63
>(XEN) (GUEST: 3) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes)
>(XEN) (GUEST: 3) ata0  slave: Unknown device
>(XEN) (GUEST: 3) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
>(XEN) (GUEST: 3) ata1  slave: Unknown device
>(XEN) (GUEST: 3)
>(XEN) (GUEST: 3) Booting from CD-Rom...
>(XEN) (GUEST: 3) unsupported PCI BIOS function 0x0E
>(XEN) (GUEST: 3) int13_harddisk: function 15, unmapped device for ELDL=81
>(XEN) HVM_PIT: guest freq in cycles=20002616
>(XEN) HVM_PIT: guest freq in cycles=2003777
>(XEN) HVM_PIT: guest freq in cycles=20002616
>(XEN) HVM_PIT: guest freq in cycles=2003777
>(XEN) HVM_PIT: guest freq in cycles=20002616
>(XEN) (GUEST: 4) HVM Loader
>(XEN) (GUEST: 4) Loading ROMBIOS ...
>(XEN) (GUEST: 4) Loading Cirrus VGABIOS ...
>(XEN) (GUEST: 4) Loading VMXAssist ...
>(XEN) (GUEST: 4) VMX go ...
>(XEN) (GUEST: 4) VMXAssist (Jun  9 2006)
>(XEN) (GUEST: 4) Memory size 256 MB
>(XEN) (GUEST: 4) E820 map:
>(XEN) (GUEST: 4) 0000000000000000 - 000000000009F800 (RAM)
>(XEN) (GUEST: 4) 000000000009F800 - 00000000000A0000 (Reserved)
>(XEN) (GUEST: 4) 00000000000A0000 - 00000000000C0000 (Type 16)
>(XEN) (GUEST: 4) 00000000000F0000 - 0000000000100000 (Reserved)
>(XEN) (GUEST: 4) 0000000000100000 - 000000000FFFE000 (RAM)
>(XEN) (GUEST: 4) 000000000FFFE000 - 000000000FFFF000 (Type 18)
>(XEN) (GUEST: 4) 000000000FFFF000 - 0000000010000000 (Type 17)
>(XEN) (GUEST: 4) 0000000010000000 - 0000000010003000 (ACPI NVS)
>(XEN) (GUEST: 4) 0000000010003000 - 000000001000D000 (ACPI Data)
>(XEN) (GUEST: 4) 00000000FEC00000 - 0000000100000000 (Type 16)
>(XEN) (GUEST: 4)
>(XEN) (GUEST: 4) Start BIOS ...
>(XEN) (GUEST: 4) Starting emulated 16-bit real-mode: ip=F000:FFF0
>(XEN) (GUEST: 4)  rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
>(XEN) HVM_PIT: guest freq in cycles=99869116
>(XEN) (GUEST: 4) Remapping master: ICW2 0x8 -> 0x20
>(XEN) (GUEST: 4) Remapping slave: ICW2 0x70 -> 0x28
>(XEN) (GUEST: 4) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>vruppert Exp $
>(XEN) (GUEST: 4) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
>2005/05/07 15:55:26 $
>(XEN) (GUEST: 4)
>(XEN) (GUEST: 4) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63
>(XEN) (GUEST: 4) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes)
>(XEN) (GUEST: 4) ata0  slave: Unknown device
>(XEN) (GUEST: 4) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
>(XEN) (GUEST: 4) ata1  slave: Unknown device
>(XEN) (GUEST: 4)
>(XEN) (GUEST: 4) Booting from CD-Rom...
>(XEN) (GUEST: 4) unsupported PCI BIOS function 0x0E
>(XEN) (GUEST: 4) int13_harddisk: function 15, unmapped device for ELDL=81
>(XEN) HVM_PIT: guest freq in cycles=20002616
>(XEN) HVM_PIT: guest freq in cycles=2003777
>(XEN) HVM_PIT: guest freq in cycles=20002616
>(XEN) (GUEST: 6) HVM Loader
>(XEN) (GUEST: 6) Loading ROMBIOS ...
>(XEN) (GUEST: 6) Loading Cirrus VGABIOS ...
>(XEN) (GUEST: 6) Loading VMXAssist ...
>(XEN) (GUEST: 6) VMX go ...
>(XEN) (GUEST: 6) VMXAssist (Jun  9 2006)
>(XEN) (GUEST: 6) Memory size 512 MB
>(XEN) (GUEST: 6) E820 map:
>(XEN) (GUEST: 6) 0000000000000000 - 000000000009F800 (RAM)
>(XEN) (GUEST: 6) 000000000009F800 - 00000000000A0000 (Reserved)
>(XEN) (GUEST: 6) 00000000000A0000 - 00000000000C0000 (Type 16)
>(XEN) (GUEST: 6) 00000000000F0000 - 0000000000100000 (Reserved)
>(XEN) (GUEST: 6) 0000000000100000 - 000000001FFFE000 (RAM)
>(XEN) (GUEST: 6) 000000001FFFE000 - 000000001FFFF000 (Type 18)
>(XEN) (GUEST: 6) 000000001FFFF000 - 0000000020000000 (Type 17)
>(XEN) (GUEST: 6) 0000000020000000 - 0000000020003000 (ACPI NVS)
>(XEN) (GUEST: 6) 0000000020003000 - 000000002000D000 (ACPI Data)
>(XEN) (GUEST: 6) 00000000FEC00000 - 0000000100000000 (Type 16)
>(XEN) (GUEST: 6)
>(XEN) (GUEST: 6) Start BIOS ...
>(XEN) (GUEST: 6) Starting emulated 16-bit real-mode: ip=F000:FFF0
>(XEN) (GUEST: 6)  rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $
>(XEN) HVM_PIT: guest freq in cycles=99869116
>(XEN) (GUEST: 6) Remapping master: ICW2 0x8 -> 0x20
>(XEN) (GUEST: 6) Remapping slave: ICW2 0x70 -> 0x28
>(XEN) (GUEST: 6) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50
>vruppert Exp $
>(XEN) (GUEST: 6) HVMAssist BIOS, 1 cpu, $Revision: 1.138 $ $Date:
>2005/05/07 15:55:26 $
>(XEN) (GUEST: 6)
>(XEN) (GUEST: 6) ata0-0: PCHS=8322/16/63 translation=lba LCHS=522/255/63
>(XEN) (GUEST: 6) ata0 master: QEMU HARDDISK ATA-2 Hard-Disk (4096 MBytes)
>(XEN) (GUEST: 6) ata0  slave: Unknown device
>(XEN) (GUEST: 6) ata1 master: QEMU CD-ROM ATAPI-4 CD-Rom/DVD-Rom
>(XEN) (GUEST: 6) ata1  slave: Unknown device
>(XEN) (GUEST: 6)
>(XEN) (GUEST: 6) Booting from Hard Disk...
>(XEN) (GUEST: 6) unsupported PCI BIOS function 0x0E
>(XEN) (GUEST: 6) int13_harddisk: function 15, unmapped device for ELDL=81
>(XEN) HVM_PIT: guest freq in cycles=20002616
>
>
>
>
>_______________________________________________
>Xen-users mailing list
>Xen-users@xxxxxxxxxxxxxxxxxxx
>http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.