RE: [Xen-users] Insufficient loop device free

[Leonardo Pinto <listas@xxxxxxxxxxxxxxxx>]

Ok. Thanks, thanks, thanks... He functioned!

--
Leonardo Pinto
listas#openlogic dot com br


Citando Satoshi Uchida <s-uchida@xxxxxxxxxxxxx>:

> Hi,
>
> Maybe, you will set up the loop back device by default.
> In Linux, loop back module is set up as using eighth devices.
>
> Please find under /dev/loop?.
> Do you see more than ninth loop devices?
> If you see only eighth loop devices (loop1 to loop8),
> please set up loop devices as using more than ninth devices.
> (for example, set 'max_loop=64'  at boot options or
>  add 'options loop max_loop=64' into /etc/modprobe.conf)
>
>
> Satoshi UCHIDA
>
> > -----Original Message-----
> > From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx
> > [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of
> > Leonardo Pinto
> > Sent: Friday, June 30, 2006 10:49 AM
> > To: Xen Users
> > Subject: [Xen-users] Insufficient loop device free
> >
> > I have a DomU that mounts some loop back files
> > (file:/f1,f2,f3,f4...), and after this virtual machine to be
> > up, does not obtain more to mount loop back files in the
> > Dom0. I receive the following error:
> >
> > # mount -o loop /f9 /mnt/f9
> > mount: could not find any free loop device
> >
> > Where it could increase this capacity?
> > It would be insufficient RAM memory?
> >
> > --
> > Leonardo Pinto
> > listas#openlogic dot com br

------------------------------------------------------------------
Esta e' uma mensagem enviada usando o OpenLogic OwbMail Messaging.


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users