|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Error on creating domain : Error: Error creating domain: (2, 'No such file or directory')
Hi all.
I'm new in xen environment and I'm in troubles running my first
domain in suse 10.
I'm using xen 3.0_6715 embedded in suse10 and when I try to create
the first domain, it gives me the following message
# xm create /etc/xen.org/p -c
Using config file "/etc/xen.org/p".
Error: Error creating domain: (2, 'No such file or directory')
The following command that I execute after the previous error, always
fails, but only once time because if I try it agein, it works !!!!
For example:
intranet:/var/run/xenstored # xm list
Name Id Mem(MB) CPU VCPU(s) State Time(s)
Domain-0 0 251 0 1 r---- 34.8
intranet:/var/run/xenstored # xm create /etc/xen.org/p -c
Using config file "/etc/xen.org/p".
Error: Error creating domain: (2, 'No such file or directory')
intranet:/var/run/xenstored # xm list
Unexpected error: xen.xend.XendProtocol.XendError
Please report to xen-devel@xxxxxxxxxxxxxxxxxxx
Traceback (most recent call last):
File "/usr/sbin/xm", line 10, in ?
main.main(sys.argv)
File "/usr/lib/python2.4/site-packages/xen/xm/main.py", line 710, in main
rc = cmd(args)
File "/usr/lib/python2.4/site-packages/xen/xm/main.py", line 226, in
xm_list
doms = server.xend_domains()
File "/usr/lib/python2.4/site-packages/xen/xend/XendClient.py", line
199, in xend_domains
return self.xendGet(self.domainurl())
File "/usr/lib/python2.4/site-packages/xen/xend/XendClient.py", line
152, in xendGet
return self.client.xendGet(url, args)
File "/usr/lib/python2.4/site-packages/xen/xend/XendProtocol.py", line
86, in xendGet
return self.xendRequest(url, "GET", args)
File "/usr/lib/python2.4/site-packages/xen/xend/XendProtocol.py", line
170, in xendRequest
val = self.handleStatus(resp.version, resp.status, resp.reason)
File "/usr/lib/python2.4/site-packages/xen/xend/XendProtocol.py", line
106, in handleStatus
return self.handleException(XendError(message))
File "/usr/lib/python2.4/site-packages/xen/xend/XendProtocol.py", line
132, in handleException
raise err
xen.xend.XendProtocol.XendError: Internal server error
intranet:/var/run/xenstored # xm list
Name Id Mem(MB) CPU VCPU(s) State Time(s)
Domain-0 0 251 0 1 r---- 36.1
My configuration file is the next:
kernel = "/boot/kernel-intranet-normal"
ramdisk = "/boot/initrd-2.6.13-15-default"
memory = 32
name = "intranet"
vif = [ 'mac=aa:00:00:00:00:11, bridge=xenbr0' ]
disk = ['file:/export/data/xen/files/intranet.vmdisk,hda1,w' ]
root = "/dev/hda1 ro"
extra = "3"
The output of ifconfig -a is the next
intranet:/var/run/xenstored # ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:00:E8:78:B9:F0
inet addr:1.100.0.210 Bcast:1.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::200:e8ff:fe78:b9f0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5316 errors:0 dropped:0 overruns:0 frame:0
TX packets:836 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:485538 (474.1 Kb) TX bytes:81240 (79.3 Kb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:2 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:116 (116.0 b) TX bytes:116 (116.0 b)
peth0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:5358 errors:0 dropped:0 overruns:0 frame:0
TX packets:862 errors:0 dropped:0 overruns:0 carrier:0
collisions:1 txqueuelen:1000
RX bytes:491668 (480.1 Kb) TX bytes:83662 (81.7 Kb)
Interrupt:5 Base address:0xd800
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:836 errors:0 dropped:0 overruns:0 frame:0
TX packets:5318 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:81240 (79.3 Kb) TX bytes:485706 (474.3 Kb)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4594 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:369908 (361.2 Kb) TX bytes:378 (378.0 b)
The output of ps aux | grep -i xen is the next
intranet:/var/run/xenstored # ps aux | grep -i xen
root 734 0.0 0.0 0 0 ? S Jun13 0:00 [xenblkd]
root 4437 0.0 0.2 1744 520 ? Ss Jun13 0:00
/usr/sbin/xenstored --pid-file=/var/run/xenstore.pid
root 4439 0.0 2.2 18372 5828 ? Ss Jun13 0:00 python
/usr/sbin/xend start
root 4440 0.0 0.1 1720 424 ? Ss Jun13 0:00
/usr/sbin/xenconsoled
root 4442 0.0 2.2 18372 5828 ? S Jun13 0:00 python
/usr/sbin/xend start
root 4448 0.0 2.2 18372 5828 ? S Jun13 0:00 python
/usr/sbin/xend start
root 4456 0.0 2.2 18372 5828 ? S Jun13 0:00 python
/usr/sbin/xend start
root 4457 0.0 2.2 18372 5828 ? S Jun13 0:00 python
/usr/sbin/xend start
root 4483 0.0 2.2 18372 5828 ? S Jun13 0:00 python
/usr/sbin/xend start
root 4852 0.1 2.2 18372 5828 ? S Jun13 0:01 python
/usr/sbin/xend start
The directories /var/run/xen and /var/run/xenstored exist and
the file that I use like block device in the configuration file
also exists.
Any ideas ?
Thanks in advanced
Juan Antonio Vera
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |