[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Xen-users] Sarge unstable +Adaptec 7892 +Software Raid1 +ReiserFS +Xen 3.0.2, could not boot


  • To: eorellan@xxxxxxxxxxxxxxxxxxx, xen-users@xxxxxxxxxxxxxxxxxxx
  • From: "Petersson, Mats" <Mats.Petersson@xxxxxxx>
  • Date: Tue, 30 May 2006 21:12:50 +0200
  • Delivery-date: Tue, 30 May 2006 12:13:14 -0700
  • List-id: Xen user discussion <xen-users.lists.xensource.com>
  • Thread-index: AcaEG+RZJNts94ylRXKKpuUJKPZCqAAAEl6w
  • Thread-topic: [Xen-users] Sarge unstable +Adaptec 7892 +Software Raid1 +ReiserFS +Xen 3.0.2, could not boot

> -----Original Message-----
> From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx 
> [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of 
> eorellan@xxxxxxxxxxxxxxxxxxx
> Sent: 30 May 2006 20:02
> To: xen-users@xxxxxxxxxxxxxxxxxxx
> Subject: [Xen-users] Sarge unstable +Adaptec 7892 +Software 
> Raid1 +ReiserFS +Xen 3.0.2, could not boot
> 
> Hi everyone.
> 
>    Some body knows why my instalation always says Could Not 
> mount root device (0,0), then reboots, i try to compile my 
> own dom0 kernel, but always says the same thing.
> 
>    I'm seeking on create the initrd image, but nothings works. :(
> 
> The currently hardware profile is this.
> 
> Intel Server Board SE7230NH1-E (VT Enabled Motherboard) Intel 
> Pentium D 830 CPU (3Ghz x 2 CPU)
> 2 GB RAM OCZ @667Mhz
> Adaptec 19160 SCSI Adapter (Based on AIC-7892).
> 
> The Sarge unstable works fine, no errors and goes up fine.
> when i boot to xen dom0, the boot process as fail with the 
> panic i'll describe before.
> 
> Some body could bring me a hand to fix this problem.

Rough steps:
Get the right settings in .config (SCSI adapters, and particularly the Adaptec 
one you've got) in your "<xenroot>/linux-2.6.16.13-xen" - using "make 
menuconfig" is one way to achieve this. 

Go to the <xenroot> and do "make dist". 

If you're using the same machine to develop and run Xen, do "make install", 
otherwise copy the contents of the "<xenroot>/dist" directory to the target 
machine and run "install.sh" from this directory. 

Once you have installed Xen and xenified linux kernel, do "depmod 
2.6.16.13-xen" and "mkinitrd /boot/initrd-2.6.16.13-xen 2.6.16.13-xen"

And of course make sure you have the initrd as a module in your 
grub.conf/menu.lst file.

That should do it - if not, please let me know what step you get which error 
message... 

--
Mats

> 
> Thanks a lot.
> 
> Edgar Díaz.
> Xen newbie
> 
> 
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
> 
> 


_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.