|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] xend messes up broadcast address on eth2
I've got a system with 3 nics. eth0 is down, eth1 is external and eth2 is
internal. (This is in a "lab" so the "external" is a 10.x.x.x address.)
Before starting xen, the broadcast for eth2 is 192.168.1.255, after starting it
becomes 0.0.0.0 - which sure doesn't look right to me - plus I'm getting
networking problems. Been digging for a while and not having any luck.
This is a xen 3.0.1 system, logs and config files below.
Any ideas on this one?
My ifconfig before starting xen:
eth1 Link encap:Ethernet HWaddr 00:30:48:59:20:BC
inet addr:10.10.4.25 Bcast:10.10.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:192 errors:0 dropped:0 overruns:0 frame:0
TX packets:126 errors:0 dropped:0 overruns:0 carrier:0
collisions:5 txqueuelen:1000
RX bytes:20633 (20.1 Kb) TX bytes:26912 (26.2 Kb)
Interrupt:26
eth2 Link encap:Ethernet HWaddr 00:30:48:59:20:BD
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:27
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
After starting xend:
root@rc25:~# /etc/init.d/xend start
root@rc25:~# ifconfig
eth1 Link encap:Ethernet HWaddr 00:30:48:59:20:BC
inet addr:10.10.4.25 Bcast:10.10.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:469 errors:0 dropped:0 overruns:0 frame:0
TX packets:246 errors:0 dropped:0 overruns:0 carrier:0
collisions:8 txqueuelen:1000
RX bytes:47514 (46.4 Kb) TX bytes:43360 (42.3 Kb)
Interrupt:26
eth2 Link encap:Ethernet HWaddr 00:30:48:59:20:BD
inet addr:192.168.1.1 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
peth2 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:27
vif0.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
xenbr0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
::::::::::::::
xend-debug.log
::::::::::::::
Nothing to flush.
::::::::::::::
xend.log
::::::::::::::
[2006-05-23 06:30:46 xend] INFO (SrvDaemon:278) Xend Daemon started
[2006-05-23 06:30:46 xend] INFO (SrvDaemon:282) Xend changeset: Tue Jan 31
11:04:12 2006 +0100 8738:e
ff96462fde8.
[2006-05-23 06:30:46 xend.XendDomainInfo] DEBUG (XendDomainInfo:199)
XendDomainInfo.recreate({'paused
': 0, 'cpu_time': 5713926366L, 'ssidref': 0, 'handle': [0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0,
0], 'shutdown_reason': 0, 'dying': 0, 'dom': 0, 'mem_kb': 217088, 'maxmem_kb':
-4, 'max_vcpu_id': 1,
'crashed': 0, 'running': 1, 'shutdown': 0, 'online_vcpus': 1, 'blocked': 0})
[2006-05-23 06:30:46 xend.XendDomainInfo] INFO (XendDomainInfo:211) Recreating
domain 0, UUID 0000000
0-0000-0000-0000-000000000000.
[2006-05-23 06:30:46 xend.XendDomainInfo] WARNING (XendDomainInfo:233) No vm
path in store for existi
ng domain 0
[2006-05-23 06:30:46 xend.XendDomainInfo] DEBUG (XendDomainInfo:663) Storing VM
details: {'ssidref':
'0', 'uuid': '00000000-0000-0000-0000-000000000000', 'on_reboot': 'restart',
'on_poweroff': 'destroy'
, 'name': 'Domain-0', 'vcpus': '2', 'vcpu_avail': '3', 'memory': '212',
'on_crash': 'restart', 'maxme
m': '212'}
[2006-05-23 06:30:46 xend.XendDomainInfo] DEBUG (XendDomainInfo:688) Storing
domain details: {'cpu/0/
availability': 'online', 'memory/target': '217088', 'cpu/1/availability':
'online', 'name': 'Domain-0
', 'console/limit': '1048576', 'vm':
'/vm/00000000-0000-0000-0000-000000000000', 'domid': '0'}
[2006-05-23 06:30:46 xend] DEBUG (XendDomain:151) number of vcpus to use is 0
[2006-05-23 06:30:46 xend] INFO (SrvServer:114) unix
path=/var/lib/xend/xend-socket
xend-config.sxp file:
# -*- sh -*-
(xend-relocation-server yes)
#
#(xend-relocation-hosts-allow '')
(xend-relocation-hosts-allow '^localhost$')
#
(network-script 'network-bridge netdev=eth2')
# Dom0 will balloon out when needed to free memory for domU.
# dom0-min-mem is the lowest memory level (in MB) dom0 will get down to.
# If dom0-min-mem=0, dom0 will never balloon out.
(dom0-min-mem 196)
# In SMP system, dom0 will use dom0-cpus # of CPUS
# If dom0-cpus = 0, dom0 will take all cpus available
(dom0-cpus 0)
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |