[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] no network interfaces in domU
Hi I have set up one domU in my xen 3.0 installation. Both, the dom0 and the domU run under Debian etch. I have configured the domU to use a static ip: ip="192.168.38.25" netmask="255.255.255.0" gateway="192.168.38.2" hostname="schicksal" dhcp="off" These parameters are also given to the domU kernel on boot, as dmesg tells: Kernel command line: ip=192.168.38.25:1.2.3.4:192.168.38.2:255.255.255.0:schicksal:eth0öff root=/dev/hda1 ro 4 NET: Registered protocol family 2 IP: routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 8192 bind 8192) NET: Registered protocol family 8 NET: Registered protocol family 20 NET: Registered protocol family 1 The only thing I dont understand here is the 1.2.3.4 between the domU ip and the gateway ip. Then running brctl in dom0 shows, that the network bridge is up: bridge name bridge id STP enabled interfaces xenbr0 8000.feffffffffff no vif25.0 peth0 vif0.0 But still, domU has no ethX interface: schicksal:~# ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) schicksal:~# ifup eth0 Ignoring unknown interface eth0=eth0. Also the hostname (schicksal) is set manually here by setting it in /etc/hostname in domU. It is _not_ set automatically. So what can be wrong here? Regards Marco _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |