[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] Multiple xen bridges
Hi everyone, With some successfull Xen3.0.1 single network interface configuration deployments behind, I've tried to setup a multinetwork xen host/DomUs following http://julien.danjou.info/xen.html. So I've diverted my /etc/xen/scripts/network-bridge to /etc/xen/scripts/network-bridge.xen and created a /etc/xen/scripts/network-bridge, with the following content: #!/bin/sh # Exit if anything goes wrong. set -e # First arg is the operation. OP=$1 shift script=/etc/xen/scripts/network-bridge.xen case ${OP} in start) $script start bridge=xenbr0 netdev=eth0 $script start bridge=xenbr1 netdev=eth1 $script start bridge=xenbri netdev=dummy0 ;; stop) $script stop bridge=xenbr0 netdev=eth0 $script stop bridge=xenbr1 netdev=eth1 $script stop bridge=xenbri netdev=dummy0 ;; *) echo 'Unknown command: ' ${OP} echo 'Valid commands are: start, stop' exit 1 esac (It's almost copy-paste from the aforementioned webpage) When I try to stop this new script it runs problemles, it kills the xenbr0 interface., but when I try to start it, it is complaining: Waiting for peth0 to negotiate link... Link veth0 is missing. This may be because you have reached the limit of the number of interfaces that the loopback driver supports. If the loopback driver is a module, you may raise this limit by passing it as a parameter (nloopbacks=<N>); if the driver is compiled statically into the kernel, then you may set the parameter using loopback.nloopbacks=<N> on the domain 0 kernel command line. And then starts up only one bridge xenbr0. System: Xen-3.0.1, Dom0=Debian Sarge, with xen from debianbase.de kernel configured and compiled localy, without touching anything loopback related, just added drbd via module-assistant. Thanks in advance. Geza _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |