[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-users] no pci support in xen-3.0.1 with gentoo?
Petersson, Mats wrote: -----Original Message-----From: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of Bobber ChengSent: 10 February 2006 11:27 To: Kneschke.Lars Cc: xen-users@xxxxxxxxxxxxxxxxxxx Subject: Re: [Xen-users] no pci support in xen-3.0.1 with gentoo? Kneschke.Lars wrote:Bobber Cheng <bobber.cheng@xxxxxxxxx> schrieb:So you mean I could not use pci devices such as ethernet device with xen 3.0.1? if it's true, that's too bad cause a Linux without network function is nothing.The virtual machine has no PCI devices, until you assign some PCI slots to this machine.Any suggestion?And the assignment of PCI slots is also not working in 3.0.1You can certainly get network functionality in DomU - you just can't getdirectly to the actual physical PCI device.Generally, the DomU is linked to the rest of the world through a "bridge" device - which is just a piece of software that transfers the data to Dom0, where Dom0 decides whether it's going to send it to the Ethernet card or just transfer it to another domain - or perhaps answeritself (in case you ping dom0 for instance). Could you tell me how to use bridge with xen? But if you really want to have direct access to the real hardware from a DomU, then you need to use either Xen 2.0.x, or wait for the PCI assignment feature in 3.0 to appear - I did see some patches a few days ago, but I'm not sure if they are applied to unstable or not. There wereseveral comments and a bit of toing and froing on the patch, IIRC.-- MatsBests, Bobber _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users _______________________________________________ Xen-users mailing list Xen-users@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-users
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |