Re: [Xen-users] XEN & DRBD

["gelpi@xxxxxxxxx" <corona@xxxxxxxx>]

Mark Williamson wrote:
> Try also supplying ARCH=xen to the DRBD make command...
>
> Cheers,
> Mark
Yes, it works.

Now I have drbd up and running under domU.

Just to give a complete information to have drbd work on his iface 
(eth1) before booting I give also the following commands:
/etc/init.d/xend start (This create bridge xen-br0 with eth0)
/etc/xen/scripts/network start bridge=xen-br1 netdev=eth1 antispoof=no
(the last one create a new bridge for eth1).

Thaks a lot

Andrea Gelpi

> On Tuesday 18 October 2005 22:21, gelpi@xxxxxxxxx wrote:
>
> > Hi,
> >         I'm trying to have drbd running on xen.
> > I was able to have it working under dom0 but not under domU.
> >
> > This is the sequence of commands I use on a debian sarge (stable) to
> > have drbd working on dom0:
> >
> > 0) Install xen from binaries
> >
> > 1) Download xen-2.0.7-src.tgz
> > 2) untar it
> > 3) make kernels
> > 5) apt-get install drbd0.7-module-source
> > 6) untar drbd
> > 7) make KDIR=~/xen-2.0/linux-2.6.11-xen0
> > 8) make install
> > 9) reboot
> >
> > Now drbd seems to work under dom0. (modprobe drbd is ok).
> >
> > For domU I have change 7 with:
> >
> > 7) make KDIR=~/xen-2.0/linux-2.6.11-xenU
> >
> > Before booting domU I copied /lib/modules/2.6.11-xenU in /lib/modules of
> > domU
> >
> > But after booting domU when I try drbd I get:
> >
> > test2:~# modprobe drbd
> > general protection fault: 0000 [#1]
> > PREEMPT
> > Modules linked in: drbd
> > CPU:    0
> > EIP:    0061:[<d08bb500>]    Not tainted VLI
> > EFLAGS: 00010286   (2.6.11.12-xenU)
> > EIP is at _drbd_alloc_ee+0x80/0xe0 [drbd]
> > eax: c11e7da0   ebx: cf3e16c4   ecx: 00000000   edx: fbffc000
> > esi: cf3e1718   edi: cf3e1724   ebp: cf3e16b8   esp: cf399f28
> > ds: 007b   es: 007b   ss: 0069
> > Process modprobe (pid: 7082, threadinfo=cf398000 task=cf34c0a0)
> > Stack: cf3e16c4 000000d0 c11e7da0 00000000 cf3ba000 00000000 d08bb5a1
> > cf3ba000
> >        c11e7da0 000000d0 cf3ba000 d08bb6e2 cf3ba000 000000d0 000000d0
> > c11e78a0
> >               d08d731b cf3ba000 00000018 cf3ba000 00000001 000009a0
> > 00000000 0000001e
> >       Call Trace:
> >        [<d08bb5a1>] drbd_alloc_ee+0x41/0x70 [drbd]
> >        [<d08bb6e2>] drbd_init_ee+0x32/0x70 [drbd]
> >        [<d08d731b>] init_module+0x31b/0x480 [drbd]
> >        [<c0132af3>] sys_init_module+0x183/0x240
> >        [<c0109258>] syscall_call+0x7/0xb
> >        Code: 45 60 c7 43 1c 00 10 00 00 66 c7 43 14 01 00 c7 43 28 01
> > 00 00 00 c7 46 08 00 00 00 00 c7 45 4c 00 00 00 00 c745 50 00 00 00 00
> > <fa> b8 00 e0c 8b 4c 24 1c 8b 93
> >     Segmentation fault
> >
> > Ideas?
> >
> > Andrea Gelpi
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users