Re: AW: [Xen-users] SuSE 10 no network in dom0 - arp problem?

[Richard Wackerbarth <richard@xxxxxxxxxx>]

On Oct 17, 2005, at 8:33 AM, Robert Welz wrote:

> brctl show
> bridge name               bridge id                     STP  
> enabled          interfaces
> xenbr0                         8000.feffffffffff              
> no                             vif0.0
>                                                                        
>                                      peth0
> shouldn't xenbr0 be bound to eth0?
>
> Robert
Robert,
I'll jump in here because I've had similar problems and, by  
explaining my reasoning, I will hopefully be corrected if I am wrong.
I believe that the answer is "NO".
Given the recent (on the Unix timeline) ability to rename devices,  
you should look at the overall dom-net architecture rather than the  
names.
peth0 is the (renamed) physical I/O device and it is bound to the  
virtual "hub" xenbr0.
We also attach to that bridge one xen net device "vifX.0" where X is  
the domain number.
The other end of that xen net device is called "eth0" in each of the  
respective domains.
dom0 is handled just like the various domU. An application sends a  
packet via "eth0". Xen causes that packet to appear on vif0.0 which  
is bound to xenbr0. Therefore the packet is replicated on peth0 and  
appears on the actual wire.
As I see it, the arp difficulty is a result of the fct that they have  
"moved" the real MAC address from peth0 to eth0. I think that the xen  
net device acts as a ppp cross-connect and does not pass arp since it  
doesn't need arp to establish routing since there is just one device  
on the other end of the (virtual) wire.
Richard

> Am 17.10.2005 um 14:20 schrieb Arnd Schmitter:
>
>
> > Are you using the default network script shipped with xen ?
> >
> > What's the configuration of your network bridge ? What say brctl ?
> >
> >
> >
> >
> > > -----Ursprüngliche Nachricht-----
> > > Von: xen-users-bounces@xxxxxxxxxxxxxxxxxxx [mailto:xen-users-
> > > bounces@xxxxxxxxxxxxxxxxxxx] Im Auftrag von Robert Welz
> > > Gesendet: Montag, 17. Oktober 2005 14:13
> > > An: Stephan Böni
> > > Cc: Xen-users@xxxxxxxxxxxxxxxxxxx
> > > Betreff: Re: [Xen-users] SuSE 10 no network in dom0 - arp problem?
> > >
> > > Hello.
> > > That didn't help.
> > >
> > > I see the same arp broadcast storms as before.
> > >
> > > Robert
> > >
> > >
> > > Am 17.10.2005 um 13:58 schrieb Stephan Böni:
> > >
> > >
> > >
> > > > Try  'export LC_MESSAGES=POSIX'  before starting xend. The Xen  
> > > > network
> > > > script has problems parsing your ifconfig because its german.
> > > >
> > > > Stephan
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > -----Ursprüngliche Nachricht-----
> > > > > Von: Robert Welz [mailto:r_welz@xxxxxx]
> > > > > Gesendet: Montag, 17. Oktober 2005 13:45
> > > > > An: Stephan Böni
> > > > > Cc: Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > Betreff: Re: [Xen-users] SuSE 10 no network in dom0 - arp problem?
> > > > >
> > > > >
> > > > > Here it is:
> > > > >
> > > > >
> > > > > eth0      Protokoll:Ethernet  Hardware Adresse 00:0E:0C:72:41:41
> > > > >            inet Adresse:192.168.2.128  Bcast:192.168.2.255  Maske:
> > > > > 255.255.255.0
> > > > >            inet6 Adresse: fe80::20e:cff:fe72:4141/64
> > > > > Gültigkeitsbereich:Verbindung
> > > > >            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> > > > >            RX packets:7 errors:0 dropped:0 overruns:0 frame:0
> > > > >            TX packets:28 errors:0 dropped:0 overruns:0 carrier:0
> > > > >            collisions:0 Sendewarteschlangenlänge:0
> > > > >            RX bytes:498 (498.0 b)  TX bytes:2064 (2.0 Kb)
> > > > >
> > > > > lo        Protokoll:Lokale Schleife
> > > > >            inet Adresse:127.0.0.1  Maske:255.0.0.0
> > > > >            inet6 Adresse: ::1/128 Gültigkeitsbereich:Maschine
> > > > >            UP LOOPBACK RUNNING  MTU:16436  Metric:1
> > > > >            RX packets:107 errors:0 dropped:0 overruns:0 frame:0
> > > > >            TX packets:107 errors:0 dropped:0 overruns:0 carrier:0
> > > > >            collisions:0 Sendewarteschlangenlänge:0
> > > > >            RX bytes:8414 (8.2 Kb)  TX bytes:8414 (8.2 Kb)
> > > > >
> > > > > peth0     Protokoll:Ethernet  Hardware Adresse FE:FF:FF:FF:FF:FF
> > > > >            inet6 Adresse: fe80::fcff:ffff:feff:ffff/64
> > > > > Gültigkeitsbereich:Verbindung
> > > > >            UP BROADCAST NOARP MULTICAST  MTU:1500  Metric:1
> > > > >            RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> > > > >            TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> > > > >            collisions:0 Sendewarteschlangenlänge:1000
> > > > >            RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
> > > > >            Basisadresse:0x9000 Speicher:d6800000-d6820000
> > > > >
> > > > > vif0.0    Protokoll:Ethernet  Hardware Adresse FE:FF:FF:FF:FF:FF
> > > > >            inet6 Adresse: fe80::fcff:ffff:feff:ffff/64
> > > > > Gültigkeitsbereich:Verbindung
> > > > >            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> > > > >            RX packets:28 errors:0 dropped:0 overruns:0 frame:0
> > > > >            TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
> > > > >            collisions:0 Sendewarteschlangenlänge:0
> > > > >            RX bytes:2064 (2.0 Kb)  TX bytes:588 (588.0 b)
> > > > >
> > > > > xenbr0    Protokoll:Ethernet  Hardware Adresse FE:FF:FF:FF:FF:FF
> > > > >            inet6 Adresse: fe80::200:ff:fe00:0/64
> > > > > Gültigkeitsbereich:Verbindung
> > > > >            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
> > > > >            RX packets:27 errors:0 dropped:0 overruns:0 frame:0
> > > > >            TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
> > > > >            collisions:0 Sendewarteschlangenlänge:0
> > > > >            RX bytes:1596 (1.5 Kb)  TX bytes:378 (378.0 b)
> > > > >
> > > > >
> > > > > Am 17.10.2005 um 13:16 schrieb Stephan Böni:
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > > Please mail me your "ifconfig" output.
> > > > > >
> > > > > > Stephan
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > > -----Ursprüngliche Nachricht-----
> > > > > > > Von: Robert Welz [mailto:r_welz@xxxxxx]
> > > > > > > Gesendet: Montag, 17. Oktober 2005 12:10
> > > > > > > An: Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > Betreff: [Xen-users] SuSE 10 no network in dom0 - arp problem?
> > > > > > >
> > > > > > >
> > > > > > > Hello.
> > > > > > > I have installed the SuSE Linux 10 XEN kernel but no domU
> > > > > yet. Now I
> > > > >
> > > > >
> > > > >
> > > > > > > cannot ping to and from dom0. I get lots of ARP broadcasts
> > > > > from dom0
> > > > >
> > > > >
> > > > >
> > > > > > > but dom0 seems to ignore ARP answers. When pinging to dom0 it
> > > > > > > ignores
> > > > > > > arp requests. This happens regardless xend is running or not.  
> > > > > > > This
> > > > > > > happens in the xen kernel only, when booting stock kernel all  
> > > > > > > works
> > > > > > > as expected.
> > > > > > >
> > > > > > > What can I do?
> > > > > > >
> > > > > > > Robert
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Xen-users mailing list
> > > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > > http://lists.xensource.com/xen-users
> > > > > > _______________________________________________
> > > > > > Xen-users mailing list
> > > > > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > > > > http://lists.xensource.com/xen-users
> > >
> > > _______________________________________________
> > > Xen-users mailing list
> > > Xen-users@xxxxxxxxxxxxxxxxxxx
> > > http://lists.xensource.com/xen-users
> > >
> > >
> > > --
> > > No virus found in this incoming message.
> > > Checked by AVG Anti-Virus.
> > > Version: 7.0.344 / Virus Database: 267.12.1/136 - Release Date:  
> > > 15.10.2005
> >
> >
> >
> >
> >
> >
> > ___________________________________________________________
> > Gesendet von Yahoo! Mail - Jetzt mit 1GB Speicher kostenlos - Hier  
> > anmelden: http://mail.yahoo.de
> >
> > _______________________________________________
> > Xen-users mailing list
> > Xen-users@xxxxxxxxxxxxxxxxxxx
> > http://lists.xensource.com/xen-users
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users
>
>
> !DSPAM:4353a87f405001367311775!

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users