[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Xen-users] Xen performance
Hi all,
While doing some benchmarking of Xen, I ran across a couple performance
issues. I am wondering if anyone else has noticed this and whether
there is anything I can do to tune the performance.
The setup:
CPU: Athlon XP 2500+ (1826.005 MHz)
RAM: Limited to 256 MB in native
and xenU
Disk:Maxtor 6B200P0, ATA DISK drive
Motherboard: ASUS A7VBX-MX SE
Network: tested only loopback
interface.
I have Fedora Core 4 installed as dom0, with Scientific Linux 3.0.7
(RHEL3) installed on a separate partition as the single domU. I
installed the FC4 xen rpms (xen-3.0-0.20050912.fc4,
kernel-xenU-2.6.12-1.1454_FC4, kernel-xen0-2.6.12-1.1454_FC4) using yum.
I used the following benchmark tools/suites:
bonnie++-1.03a
UnixBench 4.1.0
ab
lmbench 3.0-a5
The areas where I saw the greatest performance hit were in system
calls, process creation, and pipe throughput. Here are some selected
results:
UnixBench:
============
Scientific Linux 3 Native:
BYTE UNIX Benchmarks (Version 4.1.0)
System -- Linux localhost.localdomain 2.4.21-27.0.2.EL #1 Tue Jan 18
20:27:31 CST 2005 i686 athlon i386 GNU/
Linux
Start Benchmark Run: Thu Sep 22 15:23:17 PDT 2005
2 interactive users.
15:23:17 up 12 min, 2 users, load average: 0.03, 0.08, 0.05
lrwxr-xr-x 1 root root 4 Sep 9 10:56 /bin/sh ->
bash
/bin/sh: symbolic link to bash
/dev/hdc11 20161172 5059592 14077440 27% /
<--snip-->
System Call Overhead 995605.1 lps (10.0 secs, 10
samples)
Pipe Throughput 1135376.3 lps (10.0 secs, 10
samples)
Pipe-based Context Switching 375521.7 lps (10.0 secs, 10
samples)
Process Creation 9476.4 lps (30.0 secs, 3
samples)
Execl Throughput 2918.3 lps (29.7 secs, 3
samples)
<--snip-->
INDEX VALUES
TEST BASELINE RESULT
INDEX
Dhrystone 2 using register variables 116700.0 4307104.5
369.1
Double-Precision Whetstone 55.0 980.4
178.3
Execl Throughput 43.0 2918.3
678.7
File Copy 1024 bufsize 2000 maxblocks 3960.0 143780.0
363.1
File Copy 256 bufsize 500 maxblocks 1655.0 72156.0
436.0
File Copy 4096 bufsize 8000 maxblocks 5800.0 192427.0
331.8
Pipe Throughput 12440.0 1135376.3
912.7
Process Creation 126.0 9476.4
752.1
Shell Scripts (8 concurrent) 6.0 329.7
549.5
System Call Overhead 15000.0 995605.1
663.7
=========
FINAL SCORE
475.2
--------------------------------------------
SL3 XenU
BYTE UNIX Benchmarks (Version 4.1.0)
System -- Linux localhost.localdomain 2.6.12-1.1454_FC4xenU #1 SMP
Fri Sep 9 00:45:34 EDT 2005 i686 athlon i386 GNU/Linux
Start Benchmark Run: Fri Sep 23 09:08:23 PDT 2005
1 interactive users.
09:08:23 up 0 min, 1 user, load average: 0.95, 0.25, 0.08
lrwxr-xr-x 1 root root 4 Sep 9 10:56 /bin/sh ->
bash
/bin/sh: symbolic link to bash
/dev/sda1 20161172 5058964 14078068 27% /
<--snip-->
System Call Overhead 969225.3 lps (10.0 secs, 10
samples)
Pipe Throughput 619270.7 lps (10.0 secs, 10
samples)
Pipe-based Context Switching 85183.9 lps (10.0 secs, 10
samples)
Process Creation 3014.6 lps (30.0 secs, 3
samples)
Execl Throughput 1807.4 lps (29.9 secs, 3
samples)
<--snip-->
INDEX VALUES
TEST BASELINE RESULT
INDEX
Dhrystone 2 using register variables 116700.0 4288647.9
367.5
Double-Precision Whetstone 55.0 976.3
177.5
Execl Throughput 43.0 1807.4
420.3
File Copy 1024 bufsize 2000 maxblocks 3960.0 143559.0
362.5
File Copy 256 bufsize 500 maxblocks 1655.0 70328.0
424.9
File Copy 4096 bufsize 8000 maxblocks 5800.0 186297.0
321.2
Pipe Throughput 12440.0 619270.7
497.8
Process Creation 126.0 3014.6
239.3
Shell Scripts (8 concurrent) 6.0 188.0
313.3
System Call Overhead 15000.0 969225.3
646.2
=========
FINAL SCORE
356.0
---------------------------------------------------------------------------------
lmbench Selected Results:
==========================
SL3 Native:
<--snip-->
Simple syscall: 0.1516 microseconds
Simple read: 0.2147 microseconds
Simple write: 0.1817 microseconds
Simple stat: 1.8486 microseconds
Simple fstat: 0.3026 microseconds
Simple open/close: 2.2201 microseconds
<--snip-->
Protection fault: 0.2196 microseconds
Pipe latency: 2.2539 microseconds
AF_UNIX sock stream latency: 4.8221 microseconds
Process fork+exit: 143.7297 microseconds
Process fork+execve: 483.0833 microseconds
Process fork+/bin/sh -c: 1884.0000 microseconds
-------------------------------------------------
SL3 XenU:
<--snip-->
Simple syscall: 0.1671 microseconds
Simple read: 0.4090 microseconds
Simple write: 0.3588 microseconds
Simple stat: 3.5761 microseconds
Simple fstat: 0.5530 microseconds
Simple open/close: 3.9425 microseconds
<--snip-->
Protection fault: 0.5993 microseconds
Pipe latency: 12.1886 microseconds
AF_UNIX sock stream latency: 22.3485 microseconds
Process fork+exit: 365.8667 microseconds
Process fork+execve: 1066.4000 microseconds
Process fork+/bin/sh -c: 3826.0000 microseconds
<--snip-->
-------------------------------------------------------------------------
I can post the full results of these tests if anyone is interested.
Does anyone have any ideas for tuning the performance of the domUs? Are
there any configurations that perform better than others?
Thank You,
Angela Norton
|
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
