[Xen-users] Access to ioport 0x60 in domU

[zoltan <zoltan@xxxxxxxxxxxxxxxxx>]

Hello!

First, i come from germany and my english ist not so good, but try to 
explain my problem.
For my studium i have to programm a kernelmodule which replace the 
original irq-routine for the keyboarddriver. I have already compile the 
module an insmoded them in a domU. I used this example 
"http://www.faqs.org/docs/kernel/x1206.html";. With pci-access to the 
pci/isa-bridge it seems to work. But the problem is, the scancode  from 
the example "scancode = inb(0x60);" is always "ffffffff".
Can I access to this ioport  from domU. I think its possible, because 
"cat /proc/ioports" shows an port"0060-006f : keyboard".
Best regards Tino

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users