Re: [Xen-users] Windows on Xen+VT

[Mark Williamson <mark.williamson@xxxxxxxxxxxx>]

You should be able to spawn the vncviewer automatically from xm (and have the 
device emulation automatically connect to it).  Try setting: vnc=1 to start 
the server and vncviewer='yes' in the config to spawn a VNC viewer

It should work - otherwise the code in create.py and image.py can probably be 
hacked to fix it without too much difficulty.

Cheers,
Mark

On Thursday 15 September 2005 19:53, John Wilson wrote:
> How I managed to get VMX up and running:
>
> 1) Perform a Xen 3.0 source build with libvncserver installed
> 2) Modify the VMX config file and 'xm create -f vmx.img'
> 3) After confirmation of domain creation, 'netstat -nat' to look for the
> vnc server (on port 590X)... mine was located at ip 0.0.0.0:5901
> 4) vncviewer 0.0.0.0:5901
>
> And the VNC window opens up displaying the VMX domain in all its wonderful
> glory:-)
>
> My config file was just the vmx example with the image file changed.
>
> John
>
> Quoting "Puthiyaparambil, Aravindh"
>
> > John,
> >
> > I have been trying to get VNC to work with VMX domains. I have the
> > libvnc library installed. I have been able to get it working only get
> > SDL. Could you please tell me what steps you followed? It would also be
> > helpful if you could get me a copy of your Windows VMX domain's xm
> > config file.
> >
> > Thanks,
> > Aravindh
> >
> >> -----Original Message-----
> >> From: John Wilson [mailto:j.wilson@xxxxxxxxxxxxxxxxxxxxxxxx]
> >> Sent: Wednesday, September 14, 2005 3:55 PM
> >> To: xen-users@xxxxxxxxxxxxxxxxxxx
> >> Subject: [Xen-users] Windows on Xen+VT
> >>
> >> To all you guys who have managed to get Windows up on Xen...
> >>
> >> Its early days for me as I only figured out how to get it up and
> >
> > running
> >
> >> through vnc today, but basically it runs rather slowly, and I wonder
> >
> > if
> >
> >> anyone has any experience on 'best practices' and such when creating
> >
> > WinXP
> >
> >> virtual machines.
> >>
> >> I'm currently using an image that boots to windows setup I made using
> >> QEMU,
> >> and it boots fine, tells me its resuming setup, then blue screens with
> >
> > a
> >
> >> reference to an infinite loop being detected in the framebuf driver.
> >> (Although I think it might just be detecting extreme slowness as this
> >> infinite loop).
> >>
> >> 1) So how to speed it up/why would it be going so slowly? (my linux
> >
> > VMX
> >
> >> machines don't exactly burn rubber either)
> >> 2) Should I fully install windows onto the image with QEMU first?
> >> 3) Should the video output be configured for full screen, as opposed
> >
> > to
> >
> >> windowed as it is currently?
> >> 4)Is there any possibility at all that a VMX domain (especially
> >
> > windows)
> >
> >> could be run on a non-VT machine? (Beacause its a very new
> >
> > pre-production
> >
> >> bios and platform, and even though it's set up in the bios for VT, I
> >
> > don't
> >
> >> really trust it and it seems a little suspiciously slow... I suppose I
> >> could test this in the lab really:-)
> >> 5) Anything else I should know?
> >>
> >>
> >> John
>
> _______________________________________________
> Xen-users mailing list
> Xen-users@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-users

_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users