|
I am not able to login on my domU using /dev/hda2 from my hardrive
xm create -c myvmconf vmid=1
/etc/xen/myvmconf looks like this :
def vmid_check(var, val):
val = int(val)
if val <= 0:
raise ValueError
return val
xm_vars.var('vmid',
use="Virtual machine id. Integer greater than 0.",
check=vmid_check)
xm_vars.check()
kernel = "/boot/vmlinuz-2.6.11-1.1369_FC4xenU"
#builder='linux'
memory = 64
name = "VM%d" % vmid
cpu = -1 # leave to Xen to pick
#cpu = vmid # set based on vmid (mod number of CPUs)
vcpus = 1
#vcpus = 4 # make your domain a 4-way
#nics=1
#vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ]
disk = [ 'phy:hda%d,hda2,r' %(1+vmid)]
dhcp="dhcp"
root = "/dev/hda2 ro"
==========================================
MESSAGES WHILE THE KERNEL BOOTS UP on issuing command
xm create -c myvmconf vmid=1
==========================================
Using config file "/etc/xen/myvmconf".
Started domain VM1, console on port 9601
************ REMOTE CONSOLE: CTRL-] TO QUIT ********
Linux version 2.6.11-1.1369_FC4xenU (bhcompile@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.0.0 20050525 (Red Hat 4.0.0-9)) #1 SMP Thu Jun 2 23:33:51 EDT 2005
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000004000000 (usable)
64MB LOWMEM available.
Using x86 segment limits to approximate NX protection
DMI not present.
IRQ lockup detection disabled
Allocating PCI resources starting at 04000000 (gap: 04000000:fc000000)
Built 1 zonelists
Kernel command line: ip=:1.2.3.4::::eth0:dhcp root=/dev/hda2 ro
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Xen reported: 2258.351 MHz processor.
Using tsc for high-res timesource
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 60800k/65536k available (1785k kernel code, 4648k reserved, 506k data, 156k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... disabled
CPU0: Intel(R) Pentium(R) 4 CPU 2.26GHz stepping 07
per-CPU timeslice cutoff: 1462.80 usecs.
task migration cache decay timeout: 2 msecs.
SMP motherboard not detected.
smpboot_clear_io_apic_irqs
Brought up 1 CPUs
softlockup thread 0 started up.
NET: Registered protocol family 16
xen_mem: Initialising balloon driver.
Grant table initialized
audit: initializing netlink socket (disabled)
audit(1123568901.803:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 42BD35A990375F72
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Xen virtual console successfully installed as tty1
Event-channel device installed.
Blkif frontend is using grant tables.
xen_blk: Initialising virtual block device driver
xen_net: Initialising virtual ethernet driver.
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 256 buckets, 4Kbytes
TCP established hash table entries: 4096 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 156k freed
I am not getting a console here........to communicate with my new machine
on issuing xm list i see the two domains listed
[root@localhost ~]# xm list
Name Id Mem(MB) CPU State Time(s) Console
Domain-0 0 891 0 r---- 26.1
VM1 1 64 0 ----- 760.1 9601
**************** CAUTION - Disclaimer *****************
This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system.
***INFOSYS******** End of Disclaimer ********INFOSYS***
|
| 
