|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-users] xen bridge config problem
I am unable to ping the rest of the machines on the network from the guest OS.
The host, Domain-0 (10.0.1.201), and guest 10.0.1.209 can ping each other.
The host, Domain-0 (10.0.1.201) can ping the gateway 10.0.1.1.
The guest 10.0.1.209 can not ping the gateway.
I want guest domains to be available from the network. Any tips what I might
be missing? See config details below.
Thanks,
Todd
---------------------------------------------------------------------------------------------
# file: xend-config.sxp
# Xend configuration file.
# Port xend should use for the HTTP interface.
(xend-port 8000)
# Address xend should listen on.
# Specifying 'localhost' prevents remote connections.
# Specifying the empty string '' allows all connections.
(xend-address 'localhost')
## Use the following if VIF traffic is routed.
# The script used to start/stop networking for xend.
(network-script network-route)
# The default script used to control virtual interfaces.
#(vif-script vif-route)
## Use the following if VIF traffic is bridged.
# The script used to start/stop networking for xend.
#(network-script network)
# The default bridge that virtual interfaces should be connected to.
(vif-bridge xen-br0)
# The default script used to control virtual interfaces.
(vif-script vif-bridge)
# Whether iptables should be set up to prevent IP spoofing for
# virtual interfaces. Specify 'yes' or 'no'.
(vif-antispoof yes)
# Setup script for file-backed block devices
(block-file block-file)
# Setup script for enbd-backed block devices
(block-enbd block-enbd)
more gsuse.conf
# -*- mode: python; -*-
#============================================================================
# Python configuration setup for 'xm create'.
# This script sets the parameters used when a domain is created using 'xm
create'.
# You use a separate script for each domain you want to create, or
# you can set the parameters for the domain on the xm command line.
#============================================================================
#----------------------------------------------------------------------------
#########################
#####Domain config files###############
#############################
# Kernel image file.
kernel = "/boot/vmlinuz-2.6.8-24.14-xen"
# Optional ramdisk.
ramdisk = "/boot/initrd-2.6.8-24.14-xen"
# The domain build function. Default is 'linux'.
#builder='linux'
# Initial memory allocation (in megabytes) for the new domain.
memory = 128
# A name for your domain. All domains must have different names.
name = "xCAT-domain"
# Which CPU to start domain on?
#cpu = -1 # leave to Xen to pick
#----------------------------------------------------------------------------
# Define network interfaces.
# Number of network interfaces. Default is 1.
nics=1
# Optionally define mac and/or bridge for the network interfaces.
# Random MACs are assigned if not given.
#vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0 ip=10.0.1.209' ]
vif = [ 'mac=aa:00:00:00:00:11, bridge=xen-br0' ]
#----------------------------------------------------------------------------
# Define the disk devices you want the domain to have access to, and
# what you want them accessible as.
# Each disk entry is of the form phy:UNAME,DEV,MODE
# where UNAME is the device, DEV is the device name the domain will see,
# and MODE is r for read-only, w for read-write.
#disk = [ 'phy:hda1,hda1,r' ]
disk = [ 'phy:hda13,hda1,w' ]
#----------------------------------------------------------------------------
# Set the kernel command line for the new domain.
# You only need to define the IP parameters and hostname if the domain's
# IP config doesn't, e.g. in ifcfg-eth0 or via DHCP.
# You can use 'extra' to set the runlevel and custom environment
# variables used by custom rc scripts (e.g. VMID=, usr= ).
# Set if you want dhcp to allocate the IP address.
#dhcp="dhcp"
#ip="10.0.1.209"
# Set netmask.
#netmask="255.255.255.0"
# Set default gateway.
#gateway="10.0.1.1"
# Set the hostname.
#hostname= "vm%d" % vmid
#hostname="xcat-guest"
# Set root device.
root = "/dev/hda1 rw"
#root = "/dev/hda1 ro"
# Root device for nfs.
#root = "/dev/nfs"
# The nfs server.
#nfs_server = '169.254.1.0'
# Root directory on the nfs server.
#nfs_root = '/full/path/to/root/directory'
# Sets runlevel 4.
extra = "4"
#----------------------------------------------------------------------------
# Set according to whether you want the domain restarted when it exits.
# The default is 'onreboot', which restarts the domain when it shuts down
# with exit code reboot.
# Other values are 'always', and 'never'.
#restart = 'onreboot'
#============================================================================
# guest network info
linux:~ # ifconfig
eth0 Link encap:Ethernet HWaddr AA:00:00:00:00:11
inet addr:10.0.1.209 Bcast:10.0.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1413 errors:0 dropped:0 overruns:0 frame:0
TX packets:81 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:125117 (122.1 Kb) TX bytes:6938 (6.7 Kb)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:30 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2568 (2.5 Kb) TX bytes:2568 (2.5 Kb)
linux:~ # netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 10.0.1.201 0.0.0.0 UG 0 0 0 eth0
linux:~ #
##################33
# host network info
Host_machine # ifconfig
eth0 Link encap:Ethernet HWaddr 00:0F:3D:A0:7A:AC
inet addr:10.0.1.201 Bcast:10.0.1.255 Mask:255.255.255.0
inet6 addr: fe80::20f:3dff:fea0:7aac/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17 Memory:ed100000-0
eth1 Link encap:Ethernet HWaddr 00:30:1B:23:F6:10
inet addr:10.200.0.1 Bcast:10.200.0.255 Mask:255.255.255.0
inet6 addr: fe80::230:1bff:fe23:f610/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:460 (460.0 b)
Interrupt:18 Base address:0x6000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:12663 errors:0 dropped:0 overruns:0 frame:0
TX packets:12663 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:995542 (972.2 Kb) TX bytes:995542 (972.2 Kb)
vif6.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF
inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:81 errors:0 dropped:0 overruns:0 frame:0
TX packets:1463 errors:0 dropped:198 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6938 (6.7 Kb) TX bytes:129676 (126.6 Kb)
xen-br0 Link encap:Ethernet HWaddr 00:0F:3D:A0:7A:AC
inet addr:10.0.1.201 Bcast:10.0.1.255 Mask:255.255.255.255
inet6 addr: fe80::200:ff:fe00:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:23751 errors:0 dropped:0 overruns:0 frame:0
TX packets:7959 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1725615 (1.6 Mb) TX bytes:1288331 (1.2 Mb)
Host_machine # netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
10.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 xen-br0
10.200.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 xen-br0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 10.0.1.1 0.0.0.0 UG 0 0 0 xen-br0
_______________________________________________
Xen-users mailing list
Xen-users@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-users
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |