|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-ia64-devel] Re: [Xen-devel] [IA64] Weekly benchmark results [2009ww16]
Hi Yamahata-san, On <20090427040951.GK22299%yamahata@xxxxxxxxxxxxx>, Isaku Yamahata wrote: > > On Mon, Apr 27, 2009 at 09:53:55AM +0900, KUWAMURA Shin'ya wrote: > > Hi Yamahata-san, > > > > On <20090424120910.GG22299%yamahata@xxxxxxxxxxxxx>, > > Isaku Yamahata wrote: > > > > > > Can you please try this patch? > > > > NaT consumption occurred on tapdisk while PV and HVM were booting up. > > Please see the attachment file. > > Thank you. I haven't reproduce it yet. > Do you have any logs without the patch? Dom0 has no error, but domUs output errors: request_module: runaway loop modprobe binfmt-429d request_module: runaway loop modprobe binfmt-429d request_module: runaway loop modprobe binfmt-429d request_module: runaway loop modprobe binfmt-429d request_module: runaway loop modprobe binfmt-429d # hung up I attach messages of both PV and HVM domain. Best regards, -- KUWAMURA Shin'ya Linux version 2.6.18.8-xen (kuwa@xxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Thu Apr 23 09:10:17 JST 2009 EFI v1.00 by Xen/ia64: SALsystab=0x2178 ACPI 2.0=0x1000 booting generic kernel on platform xen ACPI: RSDP (v002 XEN ) @ 0x0000000000001000 ACPI: XSDT (v001 XEN Xen/ia64 0x00000000 XEN 0x00030004) @ 0x0000000000001024 ACPI: FADT (v003 XEN Xen/ia64 0x00000000 XEN 0x00030004) @ 0x0000000000001058 ACPI: MADT (v002 XEN Xen/ia64 0x00000000 XEN 0x00030004) @ 0x0000000000001478 ACPI: DSDT (v001 XEN Xen/ia64 0x00000000 XEN 0x00030004) @ 0x0000000000000000 SAL 0.1: Xen/ia64 Xen/ia64 version 0.0 SAL: AP wakeup using external interrupt vector 0xf3 No logical to physical processor mapping available ACPI: Local APIC address c0000000fee00000 ACPI: Error parsing MADT - no IOSAPIC entries 2 CPUs available, 2 CPUs total Running on Xen! start_info_pfn=0xfffd nr_pages=65536 flags=0x0 Virtual mem_map starts at 0xa0007fffffc80000 On node 0 totalpages: 64264 DMA zone: 64264 pages, LIFO batch:7 SMP: Allowing 2 CPUs, 0 hotplug CPUs Built 1 zonelists. Total pages: 64264 Kernel command line: root=/dev/hda1 ro console=tty console=xvc0 PID hash table entries: 4096 (order: 12, 32768 bytes) CPU 0: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz Console: colour dummy device 80x25 Memory: 1022256k/1028224k available (10879k code, 26240k reserved, 5054k data, 6 88k init) McKinley Errata 9 workaround not needed; disabling it Calibrating delay loop... 3185.04 BogoMIPS (lpj=15925248) Dentry cache hash table entries: 131072 (order: 6, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 5, 524288 bytes) Mount-cache hash table entries: 1024 ACPI: Core revision 20060707 Boot processor id 0x0/0x0 Fixed BSP b0 value from CPU 1 CPU 1: synchronized ITC with CPU 0 (last diff 8 cycles, maxerr 160 cycles) CPU 1: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz Calibrating delay loop... 3165.38 BogoMIPS (lpj=15826944) Brought up 2 CPUs Total of 2 processors activated (6350.43 BogoMIPS). migration_cost=12234 DMI not present or invalid. NET: Registered protocol family 16 ACPI: bus type pci registered Brought up 2 CPUs ACPI: SCI (ACPI GSI 0) not registered ACPI: Interpreter enabled ACPI: Using IOSAPIC for interrupt routing suspend: event channel 9 xen_mem: Initialising balloon driver. SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub NET: Registered protocol family 2 IP route cache hash table entries: 8192 (order: 2, 65536 bytes) TCP established hash table entries: 32768 (order: 5, 524288 bytes) TCP bind hash table entries: 16384 (order: 4, 262144 bytes) TCP: Hash tables configured (established 32768 bind 16384) TCP reno registered perfmon: version 2.0 IRQ 238 perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits) PAL Information Facility v0.5 perfmon: added sampling format default_format perfmon_default_smpl: default_format v2.0 registered Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx). SGI XFS with large block/inode numbers, no debug enabled Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (FF) [SLPF] ACPI Exception (acpi_processor-0721): AE_NOT_FOUND, Processor Device is not pres ent [20060707] ACPI: Getting cpuindex for acpiid 0x2 EFI Time Services Driver v0.4 Linux agpgart interface v0.101 (c) Dave Jones [drm] Initialized drm 1.0.1 20051102 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) HP CISS Driver (v 3.6.10) Intel(R) PRO/1000 Network Driver - version 7.1.9-k4 Copyright (c) 1999-2006 Intel Corporation. e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI e100: Copyright(c) 1999-2005 Intel Corporation tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> arcnet loaded. netconsole: not configured, aborting Linux video capture interface: v2.00 Xen virtual console successfully installed as xvc0 Event-channel device installed. netfront: Initialising virtual ethernet driver. xen-vbd: registered block device major 3 Console: switching to colour frame buffer device 100x37 input: Xen Virtual Keyboard as /class/input/input0 input: Xen Virtual Pointer as /class/input/input1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx ide-floppy driver 0.99.newide st: Version 20050830, fixed bufsize 32768, s/g segs 256 osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ Fusion MPT base driver 3.04.01 Copyright (c) 1999-2005 LSI Logic Corporation Fusion MPT SPI Host driver 3.04.01 Fusion MPT SAS Host driver 3.04.01 usbmon: debugfs is not available ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid /home/kuwa/proj/ia64/linux-2.6.18-xen.hg/drivers/usb/input/hid-core.c: v2.6:USB HID core driver i8042.c: i8042 controller self test timeout. mice: PS/2 mouse device common for all mice i2c /dev entries driver device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@xxxxxxxxxx EFI Variables Facility v0.08 2004-May-17 efivars: get_next_variable: status=8000000000000003 Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50 2006 UTC). no UART detected at 0x1 specify port snd_mpu401: probe of snd_mpu401.0 failed with error -22 ALSA device list: #0: Dummy 1 #1: Virtual MIDI Card 1 TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Bridge firewalling registered xen privcmd uses pseudo physical addr range [0x40000000, 0x3ffff000000] (4193264 MB) Xen p2m: assign p2m table of [0x0000000000000000, 0x0000000040004000) Xen p2m: to [0x0000000040000000, 0x0000000044000000) (65536 KBytes) XENBUS: Device with no driver: device/console/0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 688kB freed request_module: runaway loop modprobe binfmt-429d request_module: runaway loop modprobe binfmt-429d request_module: runaway loop modprobe binfmt-429d request_module: runaway loop modprobe binfmt-429d request_module: runaway loop modprobe binfmt-429d Linux version 2.6.9-22.EL (bhcompile@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 3.4.4
20050721 (Red Hat 3.4.4-2)) #1 SMP Mon Sep 19 17:54:55 EDT 2005
Warning: EFI system table major version mismatch: got 2.00, expected 1.00
EFI v2.00 by TianoCore.org: ACPI 2.0=0xec000 SALsystab=0x1f15aac8 SMBIOS=0x1fc01
000
booting generic kernel on platform dig
ACPI: RSDP (v002 Xen ) @ 0x00000000000ec000
ACPI: XSDT (v001 Xen HVM 0x00000000 HVML 0x00000000) @ 0x00000000000ecac
0
ACPI: FADT (v004 Xen HVM 0x00000000 HVML 0x00000000) @ 0x00000000000ec8c
0
ACPI: MADT (v002 Xen HVM 0x00000000 HVML 0x00000000) @ 0x00000000000ec9c
0
ACPI: HPET (v001 Xen HVM 0x00000000 HVML 0x00000000) @ 0x00000000000eca8
0
ACPI: DSDT (v002 Xen HVM 0x00000000 INTL 0x20061109) @ 0x000000000000000
0
Warning: acpi_table_parse(ACPI_SRAT) returned 0!
Warning: acpi_table_parse(ACPI_SLIT) returned 0!
efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole at 0x0
efi.trim_top: ignoring 636KB of memory at 0x1000 due to granule hole at 0x0
efi.trim_bottom: ignoring 48KB of memory at 0xe0000 due to granule hole at 0x0
efi.trim_bottom: ignoring 15432KB of memory at 0xee000 due to granule hole at 0x
0
efi.trim_top: ignoring 128KB of memory at 0x1ff6e000 due to granule hole at 0x20
000000
Initial ramdisk at: 0xe00000001d156000 (1601685 bytes)
SAL 3.0: Xen/ia64 Tianocore SAL Xen/ia64 SAL version 2.0
SAL: AP wakeup using external interrupt vector 0xf3
SAL Platform features: None
iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
register_intr: changing vector 47 from IO-SAPIC-edge to IO-SAPIC-level
register_intr: changing vector 38 from IO-SAPIC-edge to IO-SAPIC-level
register_intr: changing vector 37 from IO-SAPIC-edge to IO-SAPIC-level
8 CPUs available, 8 CPUs total
Registering legacy COM ports for serial console
MCA related initialization done
Virtual mem_map starts at 0xa0007fffffe40000
On node 0 totalpages: 30397
DMA zone: 30397 pages, LIFO batch:4
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: BOOT_IMAGE=atapi0:\efi\redhat\vmlinuz-2.6.9-22.EL root=/de
v/hda2 console=tty0 console=ttyS0,9600n8r hda=noprobe hdb=noprobe ro
ide_setup: hda=noprobe
ide_setup: hdb=noprobe
PID hash table entries: 1024 (order: 10, 32768 bytes)
CPU 0: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
Placing software IO TLB between 0x4a64000 - 0x8a64000
Memory: 413248k/486352k available (5611k code, 85024k reserved, 2260k data, 384k
init)
McKinley Errata 9 workaround not needed; disabling it
Calibrating delay loop... 3130.52 BogoMIPS (lpj=1527808)
Security Scaffold v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
There is already a security framework initialized, register_security failed.
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 1024 (order: 0, 16384 bytes)
Boot processor id 0x0/0x0
task migration cache decay timeout: 10 msecs.
CPU 1: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 307 cycles)
CPU 1: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3139.76 BogoMIPS (lpj=1531904)
CPU 2: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 307 cycles)
CPU 2: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3139.76 BogoMIPS (lpj=1531904)
CPU 3: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 307 cycles)
CPU 3: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3113.04 BogoMIPS (lpj=1519616)
CPU 4: synchronized ITC with CPU 0 (last diff -6 cycles, maxerr 307 cycles)
CPU 4: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3139.76 BogoMIPS (lpj=1531904)
CPU 5: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 307 cycles)
CPU 5: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3130.52 BogoMIPS (lpj=1527808)
CPU 6: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 307 cycles)
CPU 6: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3122.28 BogoMIPS (lpj=1523712)
CPU 7: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 308 cycles)
CPU 7: base freq=199.459MHz, ITC ratio=8/4, ITC freq=398.919MHz+/--1ppm
Calibrating delay loop... 3130.52 BogoMIPS (lpj=1527808)
Brought up 8 CPUs
Total of 8 processors activated (25046.16 BogoMIPS).
checking if image is initramfs... it is
Freeing initrd memory: 1552kB freed
NET: Registered protocol family 16
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
GSI 20 (level, low) -> CPU 0 (0x0000) vector 48
ACPI: PCI interrupt 0000:00:01.3[A] -> GSI 20 (level, low) -> IRQ 48
GSI 28 (level, low) -> CPU 1 (0x0100) vector 49
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 28 (level, low) -> IRQ 49
GSI 32 (level, low) -> CPU 2 (0x0200) vector 50
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 32 (level, low) -> IRQ 50
perfmon: version 2.0 IRQ 238
perfmon: Generic PMU detected, 8 PMCs, 4 PMDs, 4 counters (32 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
audit: initializing netlink socket (disabled)
audit(1240842100.314:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 2048 (order 0, 16384 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 453B8631FE6159D3
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Limiting direct PCI/PCI transfers.
PCI: PIIX3: Enabling Passive Release on 0000:00:01.0
Activating ISA DMA hang workarounds.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
EFI Time Services Driver v0.4
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 36
serio: i8042 KBD port at 0x60,0x64 irq 32
Serial: 8250/16550 driver $Revision: 1.90 $ 20 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
divert: not allocating divert_blk for non-ethernet device lo
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX3: IDE controller at PCI slot 0000:00:01.1
PIIX3: chipset revision 0
PIIX3: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide0...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 128Kbytes
TCP: Hash tables configured (established 65536 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 384kB freed
ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 28 (level, low) -> IRQ 49
suspend: event channel 11
xen-vbd: registered block device major 3
Using cfq io scheduler
hda: hda1<6>netfront: Initialising virtual ethernet driver.
hda2
divert: allocating divert_blk for eth0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
request_module: runaway loop modprobe binfmt-429d
_______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxx http://lists.xensource.com/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |