|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-ia64-devel] Re: [PATCH][RFC] fix dom0 builder TAKE3
Hi, Isaku
On our PRIMEQUEST480(having 32GB memory), I could not boot dom0 with
dom0_mem=31G.
But I could boot dom0 with dom0_mem=512M.
This is caused by p2m_expose_init().
The below is the boot log.
ELILO boot:
Uncompressing Linux... done
Loading file ..\xen\initrd-2.6.16.33-xen.img-takebe...done
Loading file ..\xen\vmlinuz-2.6.16.33-xen-takebe...done
Uncompressing... done
__ __ _____ ___ _ _ _
\ \/ /___ _ __ |___ / / _ \ _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ |_ \| | | |__| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | ___) | |_| |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |____(_)___/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
http://www.cl.cam.ac.uk/netos/xen
University of Cambridge Computer Laboratory
Xen version 3.0-unstable (root@) () Thu Jan 4 17:32:37 JST 2007
Latest ChangeSet: Tue Jan 02 16:42:09 2007 -0700 13111:912f8af36878
(XEN) Console output is synchronous.
(XEN) Xen command line: BOOT_IMAGE=scsi0:\EFI\redhat\../xen/xen.gz-takebe
com1=19200,8n1,0x3f8,48 console=com1 sync_console dom0_mem=31G
(XEN) xen image pstart: 0x4000000, xenheap pend: 0x8000000
(XEN) Xen patching physical address access by offset: 0x0
(XEN) find_memory: efi_memmap_walk returns max_page=1040000
(XEN) Before xen_heap_start: f00000000419f380
(XEN) After xen_heap_start: f0000000043ac000
(XEN) Init boot pages: 0x10000c0 -> 0x4000000.
(XEN) Init boot pages: 0x8000000 -> 0x6a19f000.
(XEN) Init boot pages: 0x6b02e270 -> 0x6b624010.
(XEN) Init boot pages: 0x6b624070 -> 0x6b627f59.
(XEN) Init boot pages: 0x6b627fcc -> 0x6b62b000.
(XEN) Init boot pages: 0x6b769c1d -> 0x6b796010.
(XEN) Init boot pages: 0x6b7966a0 -> 0x6d000000.
(XEN) Init boot pages: 0x100000000 -> 0x800000000.
(XEN) Init boot pages: 0x4080000000 -> 0x4100000000.
(XEN) System RAM: 32448MB (33226752kB)
(XEN) size of virtual frame_table: 81216kB
(XEN) virtual machine to physical table: f3fffffff7e00000 size: 16304kB
(XEN) max_page: 0x1040000
(XEN) allocating frame table/mpt table at mfn 0.
(XEN) Domain heap initialised: DMA width 30 bits
(XEN) Xen heap: 60MB (61776kB)
(XEN) ACPI: RSDP (v002 FUJITS ) @
0x000000007fc7c000
(XEN) ACPI: XSDT (v001 FUJITS PQ 0x00000003 FJ 0x00000001) @
0x000000007fcbbf28
(XEN) ACPI: FADT (v003 FUJITS PQ 0x00000001 FJ 0x00000001) @
0x000000007fcbba18
(XEN) ACPI: MADT (v001 FUJITS PQ 0x00000001 FJ 0x00000001) @
0x000000007fcbbb10
(XEN) ACPI: SPCR (v001 FUJITS PQ 0x00000001 FJ 0x00000001) @
0x000000007fcbbc18
(XEN) ACPI: SRAT (v001 FUJITS PQ 0x00000001 FJ 0x00000001) @
0x000000007fcbbc68
(XEN) ACPI: SLIT (v001 FUJITS PQ 0x00000001 FJ 0x00000001) @
0x000000007fcbbd78
(XEN) ACPI: SPMI (v001 FUJITS PQ 0x00000001 FJ 0x00000001) @
0x000000007fcbbea8
(XEN) ACPI: WSPT (v001 FUJITS PQ 0x00000001 FJ 0x00000001) @
0x000000007fcbbf00
(XEN) ACPI: DSDT (v002 FUJITS PQ 0x00000001 MSFT 0x02000002) @
0x0000000000000000
(XEN) Number of logical nodes in system = 1
(XEN) Number of memory chunks in system = 4
(XEN) SAL 3.20: FUJITSU LIMITED PRIMEQUEST version 2.5
(XEN) SAL Platform features: None
(XEN) SAL: AP wakeup using external interrupt vector 0xf0
(XEN) No logical to physical processor mapping available
(XEN) avail:0x1180c60000000000,
status:0x60000000000,control:0x1180c00000000000, vm?0x0
(XEN) No VT feature supported.
(XEN) cpu_init: current=f000000004108000
(XEN) vhpt_init: vhpt paddr=0x6a180000, end=0x6a18ffff
(XEN) ACPI: Local APIC address e8000000fee00000
(XEN) ACPI: LSAPIC (acpi_id[0x30] lsapic_id[0x00] lsapic_eid[0x03] enabled)
(XEN) CPU 0 (0x0003) enabled (BSP)
(XEN) ACPI: LSAPIC (acpi_id[0x32] lsapic_id[0x06] lsapic_eid[0x03] enabled)
(XEN) CPU 1 (0x0603) enabled
(XEN) ACPI: LSAPIC (acpi_id[0x34] lsapic_id[0x80] lsapic_eid[0x03] enabled)
(XEN) CPU 2 (0x8003) enabled
(XEN) ACPI: LSAPIC (acpi_id[0x36] lsapic_id[0x86] lsapic_eid[0x03] enabled)
(XEN) CPU 3 (0x8603) enabled
(XEN) ACPI: IOSAPIC (id[0x0] address[00000000fec00000] gsi_base[0])
(XEN) ACPI: IOSAPIC (id[0x51] address[00000000feca8000] gsi_base[1944])
(XEN) ACPI: IOSAPIC (id[0x52] address[00000000feca8800] gsi_base[1968])
(XEN) ACPI: IOSAPIC (id[0x53] address[00000000feca9000] gsi_base[1992])
(XEN) ACPI: IOSAPIC (id[0x54] address[00000000feca9800] gsi_base[2016])
(XEN) ACPI: IOSAPIC (id[0x55] address[00000000fecaa000] gsi_base[2040])
(XEN) ACPI: IOSAPIC (id[0x56] address[00000000fecaa800] gsi_base[2064])
(XEN) ACPI: IOSAPIC (id[0x57] address[00000000fecab000] gsi_base[2088])
(XEN) ACPI: IOSAPIC (id[0x58] address[00000000fecab800] gsi_base[2112])
(XEN) ACPI: PLAT_INT_SRC (low level type[0x3] id[0x0000] eid[0x3]
iosapic_vector[0x1e] global_irq[0x16]
(XEN) PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0003) vector 30
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) 4 CPUs available, 4 CPUs total
(XEN) MCA related initialization done
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) CPU 0: base freq=200.000MHz, ITC ratio=16/2, ITC freq=1600.000MHz
(XEN) Time init:
(XEN) .... System Time: 233580ns
(XEN) .... scale: A0000000
(XEN) Boot processor id 0x0/0x3
(XEN) num_online_cpus=1, max_cpus=64
(XEN) cpu_init: current=f000000007b70000
(XEN) vhpt_init: vhpt paddr=0x6b030000, end=0x6b03ffff
(XEN) CPU 1: synchronized ITC with CPU 0 (last diff -3 cycles, maxerr 597
cycles)
(XEN) CPU 1: base freq=200.000MHz, ITC ratio=16/2, ITC freq=1600.000MHz
(XEN) cpu_init: current=f000000007b68000
(XEN) vhpt_init: vhpt paddr=0x6b770000, end=0x6b77ffff
(XEN) CPU 2: synchronized ITC with CPU 0 (last diff -8 cycles, maxerr 2505
cycles)
(XEN) CPU 2: base freq=200.000MHz, ITC ratio=16/2, ITC freq=1600.000MHz
(XEN) cpu_init: current=f000000007b60000
(XEN) vhpt_init: vhpt paddr=0x6b780000, end=0x6b78ffff
(XEN) CPU 3: synchronized ITC with CPU 0 (last diff -8 cycles, maxerr 2505
cycles)
(XEN) CPU 3: base freq=200.000MHz, ITC ratio=16/2, ITC freq=1600.000MHz
(XEN) Brought up 4 CPUs
(XEN) Total of 4 processors activated (1.05 BogoMIPS).
(XEN) perfmon: added sampling format xenoprof_format
(XEN) xenoprof: using perfmon.
(XEN) perfmon: version 2.0 IRQ 238
(XEN) perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
(XEN) Maximum number of domains: 63; 18 RID bits per domain
(XEN) ERROR: Failed to allocate na16550 IRQ 48
(XEN) ERROR: Failed to allocate na16550 IRQ 3
(XEN) domain.c:470: arch_domain_create:470 domain 0 pervcpu_vhpt 1
(XEN) tlb_track_allocate_entries:69 allocated 256 num_entries 256 num_free 256
(XEN) tlb_track_create:115 hash 0xf00000006a198000 hash_size 512
(XEN) ### domain f000000007b54080: rid=40000-80000 mp_rid=1000
(XEN) arch_domain_create: domain=f000000007b54080
(XEN) *** LOADING DOMAIN 0 ***
(XEN) METAPHYSICAL MEMORY ARRANGEMENT:
(XEN) Kernel image: 4000000->516e788
(XEN) Entry address: 400ff20
(XEN) Init. ramdisk: 5174000 len 13ec1d
(XEN) Start info.: 5170000->5174000
(XEN) Dom0 max_vcpus=1
(XEN) Dom0: 0xf000000007b54080
(XEN) enable lsapic entry: 0xf00000007fcbbb3c
(XEN) DISABLE lsapic entry: 0xf00000007fcbbb48
(XEN) DISABLE lsapic entry: 0xf00000007fcbbb54
(XEN) DISABLE lsapic entry: 0xf00000007fcbbb60
(XEN) ACPI_INTERRUPT_CPEI disabled for Domain0
(XEN) Domain0 EFI passthrough: ACPI 2.0=0x7fc7c000 SMBIOS=0xf0000
(XEN) dom mem: type=13, attr=0x8000000000000008,
range=[0x0000000000000000-0x0000000000001000) (4KB)
(XEN) dom mem: type=10, attr=0x8000000000000008,
range=[0x0000000000001000-0x0000000000002000) (4KB)
(XEN) dom mem: type= 6, attr=0x8000000000000008,
range=[0x0000000000002000-0x0000000000003000) (4KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x0000000000003000-0x00000000000a0000) (628KB)
(XEN) dom mem: type= 6, attr=0x8000000000000009,
range=[0x00000000000c0000-0x0000000000100000) (256KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x0000000000100000-0x0000000004000000) (63MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x0000000004000000-0x00000000081a0000) (65MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x00000000081a0000-0x000000006a19f000) (1567MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006a19f000-0x000000006b02f000) (14MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006b02f000-0x000000006b624000) (5MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006b624000-0x000000006b62a000) (24KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006b62a000-0x000000006b62b000) (4KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006b62b000-0x000000006b794000) (1MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006b794000-0x000000006b796000) (8KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006b796000-0x000000006b79a000) (16KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006b79a000-0x000000006b79b000) (4KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006b79b000-0x000000006b7fc000) (388KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006b7fc000-0x000000006c5ca000) (13MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006c5ca000-0x000000006c5ce000) (16KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006c5ce000-0x000000006c5d0000) (8KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006c5d0000-0x000000006cbfc000) (6MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006cbfc000-0x000000006d31a000) (7MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006d31a000-0x000000006d3fc000) (904KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006d3fc000-0x000000006d456000) (360KB)
(XEN) dom mem: type= 5, attr=0x8000000000000009,
range=[0x000000006d456000-0x000000006d4fc000) (664KB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x000000006d4fc000-0x000000006d774000) (2MB)
(XEN) dom mem: type= 6, attr=0x8000000000000009,
range=[0x000000006d774000-0x000000006d800000) (560KB)
(XEN) dom mem: type= 5, attr=0x8000000000000009,
range=[0x000000007f884000-0x000000007fc7c000) (3MB)
(XEN) dom mem: type= 6, attr=0x8000000000000009,
range=[0x000000007fc7c000-0x000000007fd00000) (528KB)
(XEN) dom mem: type= 5, attr=0x8000000000000009,
range=[0x000000007fd64000-0x0000000080000000) (2MB)
(XEN) dom mem: type=11, attr=0x8000000000000001,
range=[0x00000000fe000000-0x00000000fec00000) (12MB)
(XEN) dom mem: type=11, attr=0x0000000000000001,
range=[0x00000000fec00000-0x00000000fef00000) (3MB)
(XEN) dom mem: type= 6, attr=0x8000000000000001,
range=[0x00000000ff000000-0x0000000100000000) (16MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x0000000100000000-0x0000000800000000) (28672MB)
(XEN) dom mem: type= 7, attr=0x0000000000000008,
range=[0x0000004080000000-0x00000040d16e1000) (1302MB)
(XEN) dom mem: type=11, attr=0x8000000000000001,
range=[0x00000ffc00000000-0x00000ffc80000000) (2048MB)
(XEN) dom mem: type=12, attr=0x8000000000000001,
range=[0x0003fffffc000000-0x0004000000000000) (64MB)
(XEN) Scrubbing Free RAM: ......done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: Errors and warnings
(XEN) Guest Loglevel: Nothing (Rate-limited: Errors and warnings)
(XEN) **********************************************
(XEN) ******* WARNING: CONSOLE OUTPUT IS SYNCHRONOUS
(XEN) ******* This option is intended to aid debugging of Xen by ensuring
(XEN) ******* that all output is synchronously delivered on the serial line.
(XEN) ******* However it can introduce SIGNIFICANT latencies and affect
(XEN) ******* timekeeping. It is NOT recommended for production use!
(XEN) **********************************************
(XEN) 3... 2... 1...
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to
Xen).
(XEN) vcpu_get_lrr0: Unmasked interrupts unsupported
(XEN) vcpu_get_lrr1: Unmasked interrupts unsupported
(XEN) Domain set shared_info_va to 0xfffffffffff00000
(XEN) __assign_domain_page:872 WARNING can't assign page domain
0xf000000007b54080 id 0
(XEN) already assigned pte_val 0x00100000ff000761
(XEN) mpaddr 0x00000000ff000000 physaddr 0x00000000ff000000 flags 0x2
(XEN) Linux version 2.6.16.33-xen (root@PQtest) (gcc バージョン 3.4.4 20050721 (Red
Hat 3.4.4-2)) #1 SMP Thu Jan 4 17:07:26 JST 2007
EFI v1.00 by Xen/ia64: SALsystab=0x2178 ACPI 2.0=0x7fc7c000 SMBIOS=0xf0000
Initial ramdisk at: 0xe000000005174000 (1305629 bytes)
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
SAL: AP wakeup using external interrupt vector 0xf3
xen_pal_emulator: UNIMPLEMENTED PAL CALL 42!!!!
(XEN) No logical to physical processor mapping available
vcpu_set_itc: Setting ar.itc is currently disabled (this message is only
displayed once)
(XEN) ACPI: Local APIC address c0000000fee00000
iosapic_register_platform_irq(): invalid int type 0xff
1 CPUs available, 4 CPUs total
Running on Xen! start_info_pfn=0x145c nr_pages=2031616 flags=0x3
SMP: Allowing 4 CPUs, 3 hotplug CPUs
Built 1 zonelists
Kernel command line: nomca console=tty0 console=ttyS0,19200,8n1 rhgb
root=/dev/sda2 ro
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour VGA+ 80x25
Linux version 2.6.16.33-xen (root@PQtest) (gcc バージョン 3.4.4 20050721 (Red Hat
3.4.4-2)) #1 SMP Thu Jan 4 17:07:26 JST 2007
EFI v1.00 by Xen/ia64: SALsystab=0x2178 ACPI 2.0=0x7fc7c000 SMBIOS=0xf0000
Initial ramdisk at: 0xe000000005174000 (1305629 bytes)
SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
SAL: AP wakeup using external interrupt vector 0xf3
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
iosapic_register_platform_irq(): invalid int type 0xff
1 CPUs available, 4 CPUs total
Running on Xen! start_info_pfn=0x145c nr_pages=2031616 flags=0x3
SMP: Allowing 4 CPUs, 3 hotplug CPUs
Built 1 zonelists
Kernel command line: nomca console=tty0 console=ttyS0,19200,8n1 rhgb
root=/dev/sda2 ro
PID hash table entries: 4096 (order: 12, 131072 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 67108864 (order: 15, 536870912 bytes)
Inode-cache hash table entries: 33554432 (order: 14, 268435456 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0xe0000000052b4000 - 0xe0000000092b4000
Address size: 30 bits
Memory: 30649984k/32456704k available (10480k code, 1805472k reserved, 4361k
data, 288k init)
McKinley Errata 9 workaround not needed; disabling it
register RESCHEDULE_VECTOR (RESCHED0) to xen irq (256)
register IPI_VECTOR (IPI0) to xen irq (257)
Percpu irq 238 is unsupported by xen!
register VIRQ_ITC (timer0) to xen irq (258)
Mount-cache hash table entries: 1024
Boot processor id 0x0/0x0
Brought up 1 CPUs
Total of 1 processors activated (2392.06 BogoMIPS).
migration_cost=0
checking if image is initramfs... it is
Freeing initrd memory: 1264kB freed
grant table at e000010000104000
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
ACPI: Subsystem revision 20060127
ACPI: Interpreter enabled
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [SNFF] (0000:ff)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Root Bridge [PCI1] (0001:00)
ACPI: PCI Root Bridge [PCI2] (0002:00)
ACPI: PCI Root Bridge [PCI3] (0003:00)
ACPI: PCI Root Bridge [PCI4] (0004:00)
ACPI: PCI Root Bridge [PCI5] (0005:00)
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
PCI: PXH quirk detected, disabling MSI for SHPC device
ACPI: PCI Root Bridge [PCI6] (0006:00)
ACPI: PCI Root Bridge [PCI7] (0007:00)
xen_mem: Initialising balloon driver.
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
SGI XFS with large block/inode numbers, no debug enabled
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: Power Button (FF) [PWRF]
EFI Time Services Driver v0.4
Linux agpgart interface v0.101 (c) Dave Jones
[drm] Initialized drm 1.0.1 20051102
i8042.c: No controller found.
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.10)
Intel(R) PRO/1000 Network Driver - version 6.3.9-k4
Copyright (c) 1999-2005 Intel Corporation.
PCI: Device 0005:09:01.0 not available because of resource collisions
e1000: probe of 0005:09:01.0 failed with error -22
PCI: Device 0005:09:01.1 not available because of resource collisions
e1000: probe of 0005:09:01.1 failed with error -22
eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin
<saw@xxxxxxxxxxxxx> and others
GSI 19 (level, low) -> CPU 0 (0x0000) vector 48
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 48
eth0: 0000:01:00.0, 00:0B:5D:6E:40:20, IRQ 48.
Board assembly 1011ff-255, Physical connectors present: RJ45
Primary interface chip i82555 PHY #1.
General self-test: passed.
Serial sub-system self-test: passed.
Internal registers self-test: passed.
ROM checksum self-test: passed (0xd0a6c714).
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
GSI 20 (level, low) -> CPU 0 (0x0000) vector 49
ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 49
e100: eth1: e100_probe: addr 0x80ffe000, irq 49, MAC addr 00:0B:5D:6E:00:20
tg3.c:v3.49 (Feb 2, 2006)
GSI 1944 (level, low) -> CPU 0 (0x0000) vector 50
ACPI: PCI Interrupt 0005:03:01.0[A] -> GSI 1944 (level, low) -> IRQ 50
eth2: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit)
10/100/1000BaseT Ethernet 00:0b:5d:6f:07:56
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth2: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 1945 (level, low) -> CPU 0 (0x0000) vector 51
ACPI: PCI Interrupt 0005:03:01.1[B] -> GSI 1945 (level, low) -> IRQ 51
eth3: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit)
10/100/1000BaseT Ethernet 00:0b:5d:6f:07:57
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth3: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 1992 (level, low) -> CPU 0 (0x0000) vector 52
ACPI: PCI Interrupt 0005:06:01.0[A] -> GSI 1992 (level, low) -> IRQ 52
eth4: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit)
10/100/1000BaseT Ethernet 00:0b:5d:6f:07:60
eth4: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth4: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 1993 (level, low) -> CPU 0 (0x0000) vector 53
ACPI: PCI Interrupt 0005:06:01.1[B] -> GSI 1993 (level, low) -> IRQ 53
eth5: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit)
10/100/1000BaseT Ethernet 00:0b:5d:6f:07:61
eth5: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1]
eth5: dma_rwctrl[769f4000] dma_mask[64-bit]
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
arcnet: v3.93 BETA 2000/04/29 - by Avery Pennarun et al.
netconsole: not configured, aborting
Linux video capture interface: v1.00
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
st: Version 20050830, fixed bufsize 32768, s/g segs 256
osst :I: Tape driver with OnStream support version 0.99.3
osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
Fusion MPT base driver 3.03.07
Copyright (c) 1999-2005 LSI Logic Corporation
Fusion MPT SPI Host driver 3.03.07
GSI 1968 (level, low) -> CPU 0 (0x0000) vector 54
ACPI: PCI Interrupt 0005:04:01.0[A] -> GSI 1968 (level, low) -> IRQ 54
mptbase: Initiating ioc0 bringup
ioc0: 53C1030: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=54
Vendor: FUJITSU Model: MAT3073NC Rev: 3701
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sda: 143550456 512-byte hdwr sectors (73498 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through
SCSI device sda: 143550456 512-byte hdwr sectors (73498 MB)
sda: Write Protect is off
SCSI device sda: drive cache: write through
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
Vendor: SEAGATE Model: ST336704LC Rev: 0004
Type: Direct-Access ANSI SCSI revision: 03
SCSI device sdb: 71093760 512-byte hdwr sectors (36400 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write through w/ FUA
SCSI device sdb: 71093760 512-byte hdwr sectors (36400 MB)
sdb: Write Protect is off
SCSI device sdb: drive cache: write through w/ FUA
sdb: sdb1
sd 0:0:1:0: Attached scsi disk sdb
sd 0:0:1:0: Attached scsi generic sg1 type 0
Vendor: QLogic Model: GEM359 Rev: 0204
Type: Processor ANSI SCSI revision: 02
0:0:6:0: Attached scsi generic sg2 type 3
GSI 1969 (level, low) -> CPU 0 (0x0000) vector 55
ACPI: PCI Interrupt 0005:04:01.1[B] -> GSI 1969 (level, low) -> IRQ 55
mptbase: Initiating ioc1 bringup
ioc1: 53C1030: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=55
GSI 2016 (level, low) -> CPU 0 (0x0000) vector 56
ACPI: PCI Interrupt 0005:07:01.0[A] -> GSI 2016 (level, low) -> IRQ 56
mptbase: Initiating ioc2 bringup
ioc2: 53C1030: Capabilities={Initiator,Target}
scsi2 : ioc2: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=56
Vendor: QLogic Model: GEM359 Rev: 0204
Type: Processor ANSI SCSI revision: 02
2:0:6:0: Attached scsi generic sg3 type 3
GSI 2017 (level, low) -> CPU 0 (0x0000) vector 57
ACPI: PCI Interrupt 0005:07:01.1[B] -> GSI 2017 (level, low) -> IRQ 57
mptbase: Initiating ioc3 bringup
ioc3: 53C1030: Capabilities={Initiator,Target}
scsi3 : ioc3: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=57
Fusion MPT SAS Host driver 3.03.07
usbmon: debugfs is not available
GSI 16 (level, low) -> CPU 0 (0x0000) vector 58
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 58
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: debug port 1
PCI: slot 0000:00:1d.7 has incorrect PCI cache line size of 0 bytes, correcting
to 128
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 58, io mem 0x85f04000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 58
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 58, io base 0x00000d00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 17 (level, low) -> CPU 0 (0x0000) vector 59
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 59
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 59, io base 0x00000d20
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 18 (level, low) -> CPU 0 (0x0000) vector 60
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 60
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 60, io base 0x00000d40
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx
EFI Variables Facility v0.08 2004-May-17
Advanced Linux Sound Architecture Driver Version 1.0.11rc2 (Wed Jan 04 08:57:20
2006 UTC).
no UART detected at 0x1
specify port
snd_mpu401: probe of snd_mpu401.0 failed with error -22
ALSA device list:
#0: Dummy 1
#1: Virtual MIDI Card 1
NET: Registered protocol family 2
IP route cache hash table entries: 2097152 (order: 10, 16777216 bytes)
TCP established hash table entries: 1048576 (order: 10, 16777216 bytes)
TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
TCP: Hash tables configured (established 1048576 bind 65536)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Bridge firewalling registered
xen privcmd uses pseudo physical addr range [0x40d2000000, 0x3ffff000000]
(3928784MB)
BUG at mm.c:1442
(XEN) FIXME: implement ia64 dump_execution_state()
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) BUG at mm.c:1442
(XEN) ****************************************
(XEN)
(XEN) Reboot in five seconds...
Best Regards,
Akio Takebe
>On Wed, Jan 03, 2007 at 09:02:05PM -0700, Alex Williamson wrote:
>
>> Thanks for continuing to work on this. These patches seem to work
>> fine for me, I booted with a 64GB dom0. Are there any known outstanding
>> issues with these patches (since they were sent as an RFC) or should we
>> add them to the tree? It would certainly be nice to remove the dom0
>> memory limitations. Thanks,
>
>Thank you for testing with hp box.
>Basically they should be commited except minor issues.
>I used RFC because I can test those patches only with tiger4 and
>I wasn't sure with other IA64 machines.
>
>outstanding issues (AFAIK):
>- fix_balloon_init.patch should be sent out to xen-devel because
> it modifies common code. I'll sent it out today.
> I don't think this is a big issue.
>- revise default configurations.
> xen/buildconfigs/
> linux-defconfig_xen0_ia64
> linux-defconfig_xenU_ia64
> linux-defconfig_xen_ia64
> probably CONFIG_VIRTUAL_MEM_MAP and
> CONFIG_{FLATMEM, DISCONTIGMEM, SPARSEMEM}_MANUAL should be revised.
> But I'm not very sure how they should be as default.
>- test on BULL box?
> If there is something bad with BULL box, we can solve it out later.
> - BULL: no report yet.
> - sgi altix: Jes Sorensen confirmed.
> - hp: you confirmed.
> - tiger4: I confirmed. I expect those patches are O.K. with tiger2
> because tiger2 is very similar in memory mapping.
>- domU(driver domain)
> This is an another issues. This should be addressed as a different issue.
>
>--
>yamahata
>
>_______________________________________________
>Xen-ia64-devel mailing list
>Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
>http://lists.xensource.com/xen-ia64-devel
_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |