RE: [Xen-ia64-devel] Help about a Kernel panic with Xen 3.0.0 on aTiger system

["Yang, Fred" <fred.yang@xxxxxxxxx>]

Philippe,

This is because config file in Xen 3.0  does not work for Tiger system.

You can try Cset#8437 from
http://xenbits.xensource.com/ext/xen-ia64-unstable.hg the config file
has been validated to work for Tiger4

-Fred
Philippe Berthault wrote:
> I've tried Xen 3.0.0 (testing release) on a Tiger system (2 Itanium
> processors
> and 1 GB memory) but the boot is failed with a KERNEL PANIC..
> 
> I'm using ELILO v3.5 pre2 which supports the "vmm" directive.
> The Linux used in domain0 is a RHEL-AS4, update 1.
> 
> Anyone has an idea on what is the problem ?
> Thanks.
> 
> 
> 
> MY ELILO ENTRY:
> ==============
> 
> image=vmlinuz-2.6.12.6-xen0
>     label=xen
>     vmm=xen-3.0.0.gz
>     initrd=initrd-2.6.12.6-xen0.img
>     read-only
>     append="com2=115200,8n1 console=com2 sched=bvt -- nomca
> console=ttyS1,115200 console=tty0 root=LABEL=/1234"
> 
> 
> THE BOOT TRACE FROM THE SERIAL LINE:
> ==================================
> 
> Uncompressing Linux... done
> Loading file initrd-2.6.12.6-xen0.img...done
> Loading file vmlinuz-2.6.12.6-xen0...done
> Uncompressing... done
>  __  __            _____  ___   ___
>  \ \/ /___ _ __   |___ / / _ \ / _ \
>   \  // _ \ '_ \    |_ \| | | | | | |
>   /  \  __/ | | |  ___) | |_| | |_| |
>  /_/\_\___|_| |_| |____(_)___(_)___/
> 
>  http://www.cl.cam.ac.uk/netos/xen
>  University of Cambridge Computer Laboratory
> 
>  Xen version 3.0.0 (xen@xxxxxxxxxxxx) (version gcc 3.4.3 20050227 (Red
> Hat 3.4.3-22.1)) mar d..c 20 15:27:03 CET 2005
>  Latest ChangeSet: unavailable
> 
> (XEN) xen image pstart: 0x4000000, xenheap pend: 0x8000000
> (XEN) efi.trim_top: ignoring 4KB of memory at 0x0 due to granule hole
> at 0x0 (XEN) efi.trim_top: ignoring 24KB of memory at 0x1000 due to
> granule 
> hole at 0x0
> (XEN) efi.trim_top: ignoring 8KB of memory at 0x7000 due to granule
> hole 
> at 0x0
> (XEN) efi.trim_top: ignoring 484KB of memory at 0x9000 due to granule
> hole at 0x0
> (XEN) efi.trim_top: ignoring 4KB of memory at 0x84000 due to granule
> hole at 0x0
> (XEN) efi.trim_top: ignoring 108KB of memory at 0x85000 due to granule
> hole at 0x0
> (XEN) efi.trim_bottom: ignoring 15360KB of memory at 0x100000 due to
> granule hole at 0x0
> (XEN) ready to move Dom0 to 0x8000000 with len b7c460...ready to move
> initrd to 0x8b80000 with len 13e4f5...Done
> (XEN) find_memory: efi_memmap_walk returns max_page=ffb6
> (XEN) Before heap_start: 0xf0000000040e4960
> (XEN) After heap_start: 0xf0000000040ec000
> (XEN) Init boot pages: 0x1000000 -> 0x4000000.
> (XEN) Init boot pages: 0x8000000 -> 0x3c77e010.
> (XEN) Init boot pages: 0x3c77e070 -> 0x3c781f7f.
> (XEN) Init boot pages: 0x3c781fd2 -> 0x3c785000.
> (XEN) Init boot pages: 0x3c8c34f5 -> 0x3c8cc010.
> (XEN) Init boot pages: 0x3c8cc850 -> 0x3d8b4000.
> (XEN) Init boot pages: 0x3d900000 -> 0x3fa00000.
> (XEN) Init boot pages: 0x3fe98000 -> 0x3fed8000.
> (XEN) System RAM: 1001MB (1026000kB)
> (XEN) size of frame_table: 4608kB
> (XEN) alloc_dom0: starting (initializing 512 MB...)
> (XEN) alloc_dom0: dom0_start=0000000008000000
> (XEN) Xen heap: 63MB (64592kB)
> (XEN) ACPI: RSDP (v002 INTEL                                 ) @
> 0x000000003ff98000
> (XEN) ACPI: XSDT (v001 INTEL  SR870BH2 0x01072002 MSFT 0x00010013) @
> 0x000000003ff98090
> (XEN) ACPI: FADT (v003 INTEL  SR870BH2 0x01072002 MSFT 0x00010013) @
> 0x000000003ff98138
> (XEN) ACPI: MADT (v001 INTEL  SR870BH2 0x01072002 MSFT 0x00010013) @
> 0x000000003ff98230
> (XEN) ACPI: DSDT (v001  Intel SR870BH2 0x00000000 MSFT 0x0100000d) @
> 0x0000000000000000
> (XEN) SAL 3.1: Intel Corp
> SR870BH2                         version 3.0
> (XEN) SAL Platform features: BusLock
> (XEN) avail:0x1180c60000000000,
> status:0x60000000000,control:0x1180c00000000000, vm?0x0
> (XEN) No VT feature supported.
> (XEN) cpu_init: current=f0000000040a4000,
> current->domain->arch.mm=0000000000000000
> (XEN) vhpt_init: vhpt size=0000000001000000, align=0000000001000000
> (XEN) vhpt_init: vhpt paddr=0000000005000000, end=0000000005ffffff
> (XEN) ACPI: Local APIC address 0xe8000000fee00000
> (XEN) ACPI: LSAPIC (acpi_id[0x00] lsapic_id[0x00] lsapic_eid[0x00]
> enabled) (XEN) CPU 0 (0x0000) enabled
> (XEN) ACPI: [APIC:0x07] ignored 1 entries of 2 found
> (XEN) ACPI: IOSAPIC (id[0x0] address[00000000fec00000] gsi_base[0])
> (XEN) ACPI: IOSAPIC (id[0x1] address[00000000fec10000] gsi_base[24])
> (XEN) ACPI: IOSAPIC (id[0x2] address[00000000fec20000] gsi_base[48])
> (XEN) ACPI: IOSAPIC (id[0x3] address[00000000fec30000] gsi_base[72])
> (XEN) ACPI: [APIC:0x06] ignored 1 entries of 5 found
> (XEN) ACPI: PLAT_INT_SRC (low level type[0x3] id[0x0000] eid[0x0]
> iosapic_vector[0x1e] global_irq[0x16]
> (XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> (XEN) 1 CPUs available, 1 CPUs total
> (XEN) machine to physical table: 0xf000000007f00000
> (XEN) About to call scheduler_init()
> (XEN) Using scheduler: Borrowed Virtual Time (bvt)
> (XEN) About to call init_xen_time()
> (XEN) CPU 0: base freq=199.460MHz, ITC ratio=14/2, ITC
> freq=1396.220MHz (XEN) Time init:
> (XEN) .... System Time: 1559165ns
> (XEN) .... scale:               B75A20D1
> (XEN) About to call ac_timer_init()
> (XEN) About to call sort_main_extable()
> (XEN) About to call do_createdomain()
> (XEN) arch_vcpu_info=f000000007fd0000
> (XEN) ###allocating rid_range, domain f0000000040ec100:
> starting_rid=40000, ending_rid=80000
> (XEN) arch_do_create_domain: domain=f0000000040ec100
> (XEN) About to call construct_dom0()
> (XEN) *** LOADING DOMAIN 0 ***
> (XEN) METAPHYSICAL MEMORY ARRANGEMENT:
> (XEN)  Kernel image:  4000000->4bd0e48
> (XEN)  Entry address: 400ff20
> (XEN)  Init. ramdisk: 27ac0000 len 13e4f5
> (XEN) Sync i/d cache for dom0 image SUCC
> (XEN) Dom0: 0xf0000000040ec100, domain: 0xf0000000040ec100
> (XEN) Domain0 EFI passthrough: MPS=3ff97000lxenable lsapic entry:
> 0xf00000003ff9825c
> (XEN) DISABLE lsapic entry: 0xf00000003ff98268
> (XEN)  ACPI 2.0=3ff98000lx ACPI=3ff99000lx SMBIOS=f0000lx
> (XEN) domain mem: type=4, attr=0x8,
> range=[0x0000000008000000-0x0000000008100000) (1MB)
> (XEN) domain mem: type=13, attr=0x8,
> range=[0x0000000008100000-0x0000000008200000) (1MB)
> (XEN) domain mem: type=7, attr=0x8,
> range=[0x0000000008200000-0x0000000028000000) (510MB)
> (XEN) domain mem: type=12, attr=0x8000000000000001,
> range=[0x00000ffffc000000-0x0000100000000000) (64MB)
> (XEN)  initrd start 27ac0000lx initrd size 13e4f5lxScrubbing Free RAM:
> ...........done.
> (XEN) About to call init_trace_bufs()
> (XEN) Xen trace buffers: disabled
> (XEN) About to call schedulers_start dom0=f0000000040ec100,
> idle0_dom=f0000000040d2e10
> (XEN) About to call startup_cpu_idle_loop()
> (XEN) idle0A
> (XEN) idle0D
> (XEN) Linux version 2.6.12.6-xen0 (xen@xxxxxxxxxxxxxxxxxxx) (version
> gcc 
> 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #1 SMP T5
> EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x3ff97000 ACPI
> 2.0=0x3ff98000 ACPI=0x3ff99000 SMBIOS=0xf0000
> warning: unable to switch EFI into virtual mode
> (status=9223372036854775811) Initial ramdisk at: 0xe000000027ac0000
> (1303797 bytes) 
> SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
> vcpu_get_lid: WARNING: Getting cr.lid always returns zero
> (XEN) xen_pal_emulator: index=42
> (XEN) xen_pal_emulator: UNIMPLEMENTED PAL CALL 42!!!!
> (XEN) No logical to physical processor mapping available
> xen_pal_emulator: index=4
> (XEN) xen_pal_emulator: index=2
> (XEN) xen_pal_emulator: index=2
> (XEN) xen_pal_emulator: index=2
> (XEN) xen_pal_emulator: index=8
> (XEN) xen_pal_emulator: index=17
> (XEN) xen_pal_emulator: index=34
> (XEN) xen_pal_emulator: index=6
> (XEN) vcpu_set_itc: Setting ar.itc is currently disabled
> (XEN) **** vcpu_set_itv(65536): vitm=0, setting to 0
> (XEN) xen_pal_emulator: index=8
> (XEN) cpu_init: PAL VM summary failed, assuming 18 RID bits
> xen_pal_emulator: index=19
> (XEN) iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
> ACPI: Local APIC address c0000000fee00000
> PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector
> 30 register_intr: changing vector 39 from IO-SAPIC-edge to
> IO-SAPIC-level vcpu_get_lid: WARNING: Getting cr.lid always returns
> zero (XEN) 1 CPUs available, 2 CPUs total
> *** CALLED SAL_SET_VECTORS.  IGNORED...
> (XEN) Built 1 zonelists
> Kernel command line: nomca console=ttyS1,115200 console=tty0
> root=LABEL=/1234 ro
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> xen_pal_emulator: index=14
> (XEN) vcpu_enable_timer(1000000): interval set to 649 cycles
> (XEN) Console: colour VGA+ 80x25
> Linux version 2.6.12.6-xen0 (xen@xxxxxxxxxxxxxxxxxxx) (version gcc
> 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #1 SMP Tue Dec5
> EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x3ff97000 ACPI
> 2.0=0x3ff98000 ACPI=0x3ff99000 SMBIOS=0xf0000
> warning: unable to switch EFI into virtual mode
> (status=9223372036854775811) Initial ramdisk at: 0xe000000027ac0000
> (1303797 bytes) 
> SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
> No logical to physical processor mapping available
> cpu_init: PAL VM summary failed, assuming 18 RID bits
> iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
> ACPI: Local APIC address c0000000fee00000
> PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector
> 30 register_intr: changing vector 39 from IO-SAPIC-edge to
> IO-SAPIC-level 1 CPUs available, 2 CPUs total
> Built 1 zonelists
> Kernel command line: nomca console=ttyS1,115200 console=tty0
> root=LABEL=/1234 ro
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> Console: colour VGA+ 80x25
> Running on Xen! start_info_pfn=0x1ff8 lags=0x3
> xen-event-channel using irq 233
> Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
> Delivering first extint to domain: isr=0000000000000000,
> iip=a00000010094b860
> Memory: 504256k/523264k available (8152k code, 18400k reserved, 3542k
> data, 272k init)
> McKinley Errata 9 workaround not needed; disabling it
> Mount-cache hash table entries: 1024
> (XEN) vcpu_get_lid: WARNING: Getting cr.lid always returns zero
> Boot processor id 0x0/0x0
> Brought up 1 CPUs
> Total of 1 processors activated (2085.64 BogoMIPS).
> checking if image is initramfs... it is
> Freeing initrd memory: 1264kB freed
> NET: Registered protocol family 16
> ACPI: Subsystem revision 20050309
> ACPI: Interpreter enabled
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> Ignoring range [0-cfff] (100)
> ACPI: PCI Root Bridge [PCI1] (0000:02)
> ACPI: PCI Root Bridge [PCI2] (0000:05)
> ACPI: Device [CSFF] status [00000008]: functional but not present;
> setting present
> ACPI: PCI Root Bridge [CSFF] (0000:ff)
> SCSI subsystem initialized
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post
> a report
> perfmon: version 2.0 IRQ 238
> perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47
> bits) 
> PAL Information Facility v0.5
> perfmon: added sampling format default_format
> perfmon_default_smpl: default_format v2.0 registered
> Total HugeTLB memory allocated, 0
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> Initializing Cryptographic API
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
> ACPI: Power Button (FF) [PWRF]
> EFI Time Services Driver v0.4
> Linux agpgart interface v0.101 (c) Dave Jones
> [drm] Initialized drm 1.0.0 20040925
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
> enabled acpi_serial_port: zero-length IO port range?
> ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
> acpi_serial_port: zero-length IO port range?
> ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
> Linux version 2.6.12.6-xen0 (xen@xxxxxxxxxxxxxxxxxxx) (version gcc
> 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #1 SMP Tue Dec5
> Linux version 2.6.12.6-xen0 (xen@xxxxxxxxxxxxxxxxxxx) (version gcc
> 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #1 SMP Tue Dec5
> EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x3ff97000 ACPI
> 2.0=0x3ff98000 ACPI=0x3ff99000 SMBIOS=0xf0000
> EFI v1.00 by Xen/ia64: SALsystab=0x8000178 MPS=0x3ff97000 ACPI
> 2.0=0x3ff98000 ACPI=0x3ff99000 SMBIOS=0xf0000
> warning: unable to switch EFI into virtual mode
> (status=9223372036854775811) warning: unable to switch EFI into
> virtual mode (status=9223372036854775811) Initial ramdisk at:
> 0xe000000027ac0000 (1303797 bytes) 
> Initial ramdisk at: 0xe000000027ac0000 (1303797 bytes)
> SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
> SAL 0.1: Xen/ia64 Xen/ia64 version 0.0
> No logical to physical processor mapping available
> No logical to physical processor mapping available
> cpu_init: PAL VM summary failed, assuming 18 RID bits
> cpu_init: PAL VM summary failed, assuming 18 RID bits
> iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
> iosapic_system_init: Disabling PC-AT compatible 8259 interrupts
> ACPI: Local APIC address c0000000fee00000
> ACPI: Local APIC address c0000000fee00000
> PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector
> 30 PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000)
> vector 30 register_intr: changing vector 39 from IO-SAPIC-edge to
> IO-SAPIC-level register_intr: changing vector 39 from IO-SAPIC-edge
> to IO-SAPIC-level 1 CPUs available, 2 CPUs total
> 1 CPUs available, 2 CPUs total
> Built 1 zonelists
> Built 1 zonelists
> Kernel command line: nomca console=ttyS1,115200 console=tty0
> root=LABEL=/1234 ro
> Kernel command line: nomca console=ttyS1,115200 console=tty0
> root=LABEL=/1234 ro
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> Console: colour VGA+ 80x25
> Console: colour VGA+ 80x25
> Running on Xen! start_info_pfn=0x1ff8 lags=0x3
> Running on Xen! start_info_pfn=0x1ff8 lags=0x3
> xen-event-channel using irq 233
> xen-event-channel using irq 233
> Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
> Dentry cache hash table entries: 65536 (order: 5, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
> Inode-cache hash table entries: 32768 (order: 4, 262144 bytes)
> Memory: 504256k/523264k available (8152k code, 18400k reserved, 3542k
> data, 272k init)
> Memory: 504256k/523264k available (8152k code, 18400k reserved, 3542k
> data, 272k init)
> McKinley Errata 9 workaround not needed; disabling it
> McKinley Errata 9 workaround not needed; disabling it
> Mount-cache hash table entries: 1024
> Mount-cache hash table entries: 1024
> Boot processor id 0x0/0x0
> Boot processor id 0x0/0x0
> Brought up 1 CPUs
> Brought up 1 CPUs
> Total of 1 processors activated (2085.64 BogoMIPS).
> Total of 1 processors activated (2085.64 BogoMIPS).
> checking if image is initramfs... it is
> checking if image is initramfs... it is
> Freeing initrd memory: 1264kB freed
> Freeing initrd memory: 1264kB freed
> NET: Registered protocol family 16
> NET: Registered protocol family 16
> ACPI: Subsystem revision 20050309
> ACPI: Subsystem revision 20050309
> ACPI: Interpreter enabled
> ACPI: Interpreter enabled
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: Using IOSAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> Ignoring range [0-cfff] (100)
> Ignoring range [0-cfff] (100)
> ACPI: PCI Root Bridge [PCI1] (0000:02)
> ACPI: PCI Root Bridge [PCI1] (0000:02)
> ACPI: PCI Root Bridge [PCI2] (0000:05)
> ACPI: PCI Root Bridge [PCI2] (0000:05)
> ACPI: Device [CSFF] status [00000008]: functional but not present;
> setting present
> ACPI: Device [CSFF] status [00000008]: functional but not present;
> setting present
> ACPI: PCI Root Bridge [CSFF] (0000:ff)
> ACPI: PCI Root Bridge [CSFF] (0000:ff)
> SCSI subsystem initialized
> SCSI subsystem initialized
> usbcore: registered new driver hub
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post
> a report
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post
> a report
> perfmon: version 2.0 IRQ 238
> perfmon: version 2.0 IRQ 238
> perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47
> bits) perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters
> (47 bits) 
> PAL Information Facility v0.5
> PAL Information Facility v0.5
> perfmon: added sampling format default_format
> perfmon: added sampling format default_format
> perfmon_default_smpl: default_format v2.0 registered
> perfmon_default_smpl: default_format v2.0 registered
> Total HugeTLB memory allocated, 0
> Total HugeTLB memory allocated, 0
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> Initializing Cryptographic API
> Initializing Cryptographic API
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
> acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (FF) [PWRF]
> EFI Time Services Driver v0.4
> EFI Time Services Driver v0.4
> Linux agpgart interface v0.101 (c) Dave Jones
> Linux agpgart interface v0.101 (c) Dave Jones
> [drm] Initialized drm 1.0.0 20040925
> [drm] Initialized drm 1.0.0 20040925
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing
> enabled Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ
> sharing enabled acpi_serial_port: zero-length IO port range?
> acpi_serial_port: zero-length IO port range?
> ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
> ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
> acpi_serial_port: zero-length IO port range?
> acpi_serial_port: zero-length IO port range?
> ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
> ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
> io scheduler noop registeredio scheduler noop registered
> 
> io scheduler anticipatory registeredio scheduler anticipatory
> registered 
> 
> io scheduler deadline registeredio scheduler deadline registered
> 
> io scheduler cfq registeredio scheduler cfq registered
> 
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> loop: loaded (max 8 devices)
> Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
> Intel(R) PRO/1000 Network Driver - version 6.0.54-k2
> Copyright (c) 1999-2004 Intel Corporation.
> Copyright (c) 1999-2004 Intel Corporation.
> GSI 24 (level, low) -> CPU 0 (0x0000) vector 48
> GSI 24 (level, low) -> CPU 0 (0x0000) vector 48
> ACPI: PCI Interrupt 0000:04:01.0[A] -> ACPI: PCI Interrupt
> 0000:04:01.0[A] -> GSI 24 (level, low) -> IRQ 48
> GSI 24 (level, low) -> IRQ 48
> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
> GSI 25 (level, low) -> CPU 0 (0x0000) vector 49
> GSI 25 (level, low) -> CPU 0 (0x0000) vector 49
> ACPI: PCI Interrupt 0000:04:01.1[B] -> ACPI: PCI Interrupt
> 0000:04:01.1[B] -> GSI 25 (level, low) -> IRQ 49
> GSI 25 (level, low) -> IRQ 49
> e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
> e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
> e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
> e100: Copyright(c) 1999-2005 Intel Corporation
> e100: Copyright(c) 1999-2005 Intel Corporation
> Linux video capture interface: v1.00
> Linux video capture interface: v1.00
> grant table at e000000007ff4000
> grant table at e000000007ff4000
> Grant table initialized
> Grant table initialized
> WARNING: Failed to register Xen virtual console driver as 'ttyS0'
> WARNING: Failed to register Xen virtual console driver as 'ttyS0'
> Event-channel device installed.
> Event-channel device installed.
> Allocated mmap_vstart: 0xa000000200000000
> Allocated mmap_vstart: 0xa000000200000000
> st: Version 20050312, fixed bufsize 32768, s/g segs 256
> st: Version 20050312, fixed bufsize 32768, s/g segs 256
> osst :I: Tape driver with OnStream support version 0.99.3
> osst :I: Tape driver with OnStream support version 0.99.3
> osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
> osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
> Fusion MPT base driver 3.01.20
> Fusion MPT base driver 3.01.20
> Copyright (c) 1999-2004 LSI Logic Corporation
> Copyright (c) 1999-2004 LSI Logic Corporation
> GSI 48 (level, low) -> CPU 0 (0x0000) vector 50
> GSI 48 (level, low) -> CPU 0 (0x0000) vector 50
> ACPI: PCI Interrupt 0000:03:01.0[A] -> ACPI: PCI Interrupt
> 0000:03:01.0[A] -> GSI 48 (level, low) -> IRQ 50
> GSI 48 (level, low) -> IRQ 50
> mptbase: Initiating ioc0 bringup
> mptbase: Initiating ioc0 bringup
> ioc0: ioc0: 53C1030: 53C1030:
> Capabilities={Capabilities={InitiatorInitiator}
> }
> Unable to handle kernel NULL pointer dereference (address
> 0000000000000020) Unable to handle kernel NULL pointer dereference
> (address 0000000000000020) swapper[1]: Oops 8813272891392 [1]
> swapper[1]: Oops 8813272891392 [1]
> Modules linked in:Modules linked in:
> 
> 
> 
> Pid: 1, CPU 0, comm:              swapper
> Pid: 1, CPU 0, comm:              swapper
> psr : 0000001008026010 ifs : 8000000000000710 ip  :
> [<a0000001006dbbb0>]    Not tainted
> psr : 0000001008026010 ifs : 8000000000000710 ip  :
> [<a0000001006dbbb0>]    Not tainted
> ip is at sba_unmap_single+0x70/0x860
> ip is at sba_unmap_single+0x70/0x860
> unat: 0000000000000000 pfs : 800000000000038b rsc : 000000000000000b
> unat: 0000000000000000 pfs : 800000000000038b rsc : 000000000000000b
> rnat: 0000000000000000 bsps: 0000000000000000 pr  : 85a96814096a5695
> rnat: 0000000000000000 bsps: 0000000000000000 pr  : 85a96814096a5695
> ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
> ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
> csd : 0000000000000000 ssd : 0000000000000000
> csd : 0000000000000000 ssd : 0000000000000000
> b0  : a0000001006dc620 b6  : a0000001004fed80 b7  : a000000100069d90
> b0  : a0000001006dc620 b6  : a0000001004fed80 b7  : a000000100069d90
> f6  : 1003e0000000000000000 f7  : 1003e8080808080808081
> f6  : 1003e0000000000000000 f7  : 1003e8080808080808081
> f8  : 1003e0000000000000000 f9  : 1003e0000000000000000
> f8  : 1003e0000000000000000 f9  : 1003e0000000000000000
> f10 : 1003e0000000000000000 f11 : 1003e44b831eee7285baf
> f10 : 1003e0000000000000000 f11 : 1003e44b831eee7285baf
> r1  : a000000100d50b90 r2  : 0000000000000020 r3  : a000000100ac8300
> r1  : a000000100d50b90 r2  : 0000000000000020 r3  : a000000100ac8300
> r8  : a000000100ac8300 r9  : a000000100b51c90 r10 : e000000027c7f120
> r8  : a000000100ac8300 r9  : a000000100b51c90 r10 : e000000027c7f120
> r11 : e000000027e4c008 r12 : e0000000085ffac0 r13 : e0000000085f8000
> r11 : e000000027e4c008 r12 : e0000000085ffac0 r13 : e0000000085f8000
> r14 : e0000000087f1d08 r15 : 000000000000007f r16 : 0000000000ff0000
> r14 : e0000000087f1d08 r15 : 000000000000007f r16 : 0000000000ff0000
> r17 : e000000027ebb978 r18 : e000000027e4c004 r19 : e000000027ebb97a
> r17 : e000000027ebb978 r18 : e000000027e4c004 r19 : e000000027ebb97a
> r20 : 0000000000000001 r21 : 00000000a07f0807 r22 : 0000000000000000
> r20 : 0000000000000001 r21 : 00000000a07f0807 r22 : 0000000000000000
> r23 : 0000000000000000 r24 : 0000000000000000 r25 : 0000000000000000
> r23 : 0000000000000000 r24 : 0000000000000000 r25 : 0000000000000000
> r26 : 0000000000000000 r27 : 0000000000004000 r28 : e000000008210000
> r26 : 0000000000000000 r27 : 0000000000004000 r28 : e000000008210000
> r29 : 0000000000000000 r30 : 0000000000000000 r31 : a000000100b01090
> r29 : 0000000000000000 r30 : 0000000000000000 r31 : a000000100b01090
> 
> 
> Call Trace:
> Call Trace:
>  [<a000000100018200>] show_stack+0x80/0xa0
>  [<a000000100018200>] show_stack+0x80/0xa0
>                                 sp=e0000000085ff670
>                                 bsp=e0000000085f9248
>  sp=e0000000085ff670 bsp=e0000000085f9248 [<a000000100018b10>]
>  show_regs+0x890/0x8c0 [<a000000100018b10>] show_regs+0x890/0x8c0
>                                 sp=e0000000085ff840
>                                 bsp=e0000000085f9200
>  sp=e0000000085ff840 bsp=e0000000085f9200 [<a000000100040530>]
>  die+0x150/0x200 [<a000000100040530>] die+0x150/0x200
>                                 sp=e0000000085ff860
>                                 bsp=e0000000085f91b8
>  sp=e0000000085ff860 bsp=e0000000085f91b8 [<a000000100065d10>]
>  ia64_do_page_fault+0x9d0/0xba0 [<a000000100065d10>]
>                                 ia64_do_page_fault+0x9d0/0xba0
>                                 sp=e0000000085ff860
>  bsp=e0000000085f9150 sp=e0000000085ff860 bsp=e0000000085f9150
>  [<a00000010006a140>] xen_leave_kernel+0x0/0x360 [<a00000010006a140>]
>                                 xen_leave_kernel+0x0/0x360
>                                 sp=e0000000085ff8f0
>  bsp=e0000000085f9150 sp=e0000000085ff8f0 bsp=e0000000085f9150
>  [<a0000001006dbbb0>] sba_unmap_single+0x70/0x860
>                                 [<a0000001006dbbb0>]
>                                 sba_unmap_single+0x70/0x860
>  sp=e0000000085ffac0 bsp=e0000000085f90d0 sp=e0000000085ffac0
>  bsp=e0000000085f90d0 [<a0000001006dc620>]
>                                 sba_free_coherent+0x40/0xc0
>                                 [<a0000001006dc620>]
>  sba_free_coherent+0x40/0xc0 sp=e0000000085ffac0 bsp=e0000000085f9098
>  sp=e0000000085ffac0 bsp=e0000000085f9098 [<a000000100599740>]
>                                 mpt_do_ioc_recovery+0xfe0/0x2180
>                                 [<a000000100599740>]
>  mpt_do_ioc_recovery+0xfe0/0x2180 sp=e0000000085ffac0
>  bsp=e0000000085f8f98 sp=e0000000085ffac0 bsp=e0000000085f8f98
>                                 [<a00000010059b190>]
>                                 mptbase_probe+0x5d0/0x1160
>  [<a00000010059b190>] mptbase_probe+0x5d0/0x1160 sp=e0000000085ffe20
>  bsp=e0000000085f8f28 sp=e0000000085ffe20 bsp=e0000000085f8f28
>                                 [<a000000100304dd0>]
>                                 pci_device_probe+0x150/0x480
>  [<a000000100304dd0>] pci_device_probe+0x150/0x480
>  sp=e0000000085ffe30 bsp=e0000000085f8ee0 sp=e0000000085ffe30
>                                 bsp=e0000000085f8ee0
>                                 [<a00000010044be70>]
>  driver_probe_device+0xb0/0x180 [<a00000010044be70>]
>  driver_probe_device+0xb0/0x180 sp=e0000000085ffe30
>                                 bsp=e0000000085f8eb0
>                                 sp=e0000000085ffe30
>  bsp=e0000000085f8eb0 [<a00000010044c200>] driver_attach+0x120/0x1a0
>  [<a00000010044c200>] driver_attach+0x120/0x1a0 sp=e0000000085ffe30
>                                 bsp=e0000000085f8e80
>                                 sp=e0000000085ffe30
>  bsp=e0000000085f8e80 [<a00000010044caf0>] bus_add_driver+0x150/0x360
>  [<a00000010044caf0>] bus_add_driver+0x150/0x360 sp=e0000000085ffe30
>                                 bsp=e0000000085f8e40
>                                 sp=e0000000085ffe30
>  bsp=e0000000085f8e40 [<a00000010044d830>] driver_register+0x70/0xa0
>  [<a00000010044d830>] driver_register+0x70/0xa0 sp=e0000000085ffe30
>                                 bsp=e0000000085f8e20
>                                 sp=e0000000085ffe30
>  bsp=e0000000085f8e20 [<a000000100304580>]
>  pci_register_driver+0x100/0x160 [<a000000100304580>]
>                                 pci_register_driver+0x100/0x160
>                                 sp=e0000000085ffe30
>  bsp=e0000000085f8df0 sp=e0000000085ffe30 bsp=e0000000085f8df0
>  [<a000000100965170>] fusion_init+0x270/0x2a0 [<a000000100965170>]
>                                 fusion_init+0x270/0x2a0
>                                 sp=e0000000085ffe30
>  bsp=e0000000085f8dc8 sp=e0000000085ffe30 bsp=e0000000085f8dc8
>  [<a000000100011200>] init+0x360/0x940 [<a000000100011200>]
>                                 init+0x360/0x940 sp=e0000000085ffe30
>                                 bsp=e0000000085f8d68
>  sp=e0000000085ffe30 bsp=e0000000085f8d68 [<a00000010001a490>]
>  kernel_thread_helper+0x30/0x60 [<a00000010001a490>]
>                                 kernel_thread_helper+0x30/0x60
>                                 sp=e0000000085ffe30
>   bsp=e0000000085f8d40 sp=e0000000085ffe30 bsp=e0000000085f8d40
> [<a000000100010d40>] start_kernel_thread+0x20/0x40
> [<a000000100010d40>] start_kernel_thread+0x20/0x40
> sp=e0000000085ffe30 bsp=e0000000085f8d40 sp=e0000000085ffe30
> bsp=e0000000085f8d40 <0>Kernel panic - not syncing: Attempted to kill
> init! <0>Kernel panic - not syncing: Attempted to kill init!    
> 
> 
> 
> _______________________________________________
> Xen-ia64-devel mailing list
> Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
> http://lists.xensource.com/xen-ia64-devel


_______________________________________________
Xen-ia64-devel mailing list
Xen-ia64-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-ia64-devel