|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH v2 4/4] xen/arm: its: handle dma-noncoherent on GIC and ITS nodes
On Fri, Jul 31, 2026 at 10:39:54AM +0200, Orzel, Michal wrote:
>
>
> On 28-May-26 02:25, Mykola Kvach wrote:
> > From: Mykola Kvach <mykola_kvach@xxxxxxxx>
> >
> > The DT dma-noncoherent property describes the bus coherency of the device
> > represented by the node. On an ITS subnode, that is memory accessed by that
> > ITS, so add GICV3_QUIRK_MEM_NC_NS to the corresponding host_its before
> > programming GITS tables and allocating ITTs.
> >
> > When the property is present on the top-level GIC node, it describes the
> > Redistributor side of the LPI path. Collect it in
> > gicv3_lpi_init_host_lpis() and apply it only to the host LPI policy used
> > for GICR_PROPBASER and GICR_PENDBASER setup.
> >
> > Do not inherit the property between parent and child nodes: ITS-node
> > non-coherency does not change the global host LPI policy, and GIC-node
> > non-coherency does not change per-ITS quirk_flags.
> >
> > ACPI is left unchanged; this patch only consumes the DT dma-noncoherent
> > property.
> >
> > Signed-off-by: Mykola Kvach <mykola_kvach@xxxxxxxx>
> > ---
> > Changes in v2:
> > - Split v1's dma-noncoherent handling into explicit ITS-node and GIC-node
> > scopes.
> > - Apply an ITS subnode property only to the matching host_its quirk_flags.
> > - Collect the top-level GIC property from gic-v3-lpi.c before host LPI
> > allocations use host_lpi_flags.
> > ---
> > xen/arch/arm/gic-v3-its.c | 21 +++++++++++++++++++--
> > xen/arch/arm/gic-v3-lpi.c | 22 +++++++++++++++++++++-
> > 2 files changed, 40 insertions(+), 3 deletions(-)
> >
> > diff --git a/xen/arch/arm/gic-v3-its.c b/xen/arch/arm/gic-v3-its.c
> > index e055914763..606b127487 100644
> > --- a/xen/arch/arm/gic-v3-its.c
> > +++ b/xen/arch/arm/gic-v3-its.c
> > @@ -134,6 +134,21 @@ static const struct its_quirk *__init
> > gicv3_its_find_quirk(
> > return NULL;
> > }
> >
> > +static void __init gicv3_its_collect_fw_attrs(struct host_its *hw_its)
> > +{
> > + /*
> > + * An ITS subnode property describes memory transactions made by that
> > ITS.
> > + * Do not inherit it into the global host LPI/Redistributor policy.
> > + */
> > + if ( !hw_its->dt_node ||
> > + !dt_property_read_bool(hw_its->dt_node, "dma-noncoherent") )
> > + return;
> > +
> > + hw_its->quirk_flags |= GICV3_QUIRK_MEM_NC_NS;
> > + printk("GICv3: ITS @%#"PRIpaddr" marked dma-noncoherent\n",
> > + hw_its->addr);
> > +}
> > +
> > static void __init gicv3_its_collect_quirks(struct host_its *hw_its)
> > {
> > const struct its_quirk *quirk = gicv3_its_find_quirk(hw_its);
> > @@ -144,6 +159,8 @@ static void __init gicv3_its_collect_quirks(struct
> > host_its *hw_its)
> > gicv3_lpi_update_host_flags(quirk->lpi_flags);
> > printk("GICv3: enabling workaround for ITS: %s\n", quirk->desc);
> > }
> > +
> > + gicv3_its_collect_fw_attrs(hw_its);
> > }
> >
> > uint64_t gicv3_mem_get_cacheability(uint32_t flags)
> > @@ -578,7 +595,7 @@ static int gicv3_disable_its(struct host_its *hw_its)
> > return -ETIMEDOUT;
> > }
> >
> > -static int gicv3_its_init_single_its(struct host_its *hw_its)
> > +static int __init gicv3_its_init_single_its(struct host_its *hw_its)
> These __init additions have nothing to do with dma-noncoherent and
> are not mentioned in the commit message. They belong with patch 2/4,
> which is where the callees became __init.
I'll move the ITS __init annotations out of this patch and into the
replacement first patch, so they precede the init-only quirk collectors
>
> > {
> > uint64_t reg;
> > int i, ret;
> > @@ -1221,7 +1238,7 @@ static void gicv3_its_acpi_init(void)
> >
> > #endif
> >
> > -int gicv3_its_init(void)
> > +int __init gicv3_its_init(void)
> > {
> > struct host_its *hw_its;
> > int ret;
> > diff --git a/xen/arch/arm/gic-v3-lpi.c b/xen/arch/arm/gic-v3-lpi.c
> > index 35f93e4756..c6f17b9b2d 100644
> > --- a/xen/arch/arm/gic-v3-lpi.c
> > +++ b/xen/arch/arm/gic-v3-lpi.c
> > @@ -7,7 +7,9 @@
> > * Copyright (C) 2016,2017 - ARM Ltd
> > */
> >
> > +#include <xen/acpi.h>
> > #include <xen/cpu.h>
> > +#include <xen/device_tree.h>
> > #include <xen/lib.h>
> > #include <xen/mm.h>
> > #include <xen/param.h>
> > @@ -101,6 +103,20 @@ void __init gicv3_lpi_update_host_flags(uint32_t flags)
> > host_lpi_flags |= flags;
> > }
> >
> > +static void __init gicv3_lpi_collect_fw_attrs(void)
> > +{
> > + /*
> > + * A top-level GIC node property describes the Redistributor side of
> > the
> > + * LPI path. Do not inherit it into per-ITS policy.
> > + */
> > + if ( !acpi_disabled ||
> > + !dt_property_read_bool(dt_interrupt_controller,
> > "dma-noncoherent") )
> > + return;
> > +
> > + gicv3_lpi_update_host_flags(GICV3_QUIRK_MEM_NC_NS);
> > + printk("GICv3: GIC node marked dma-noncoherent for host LPI tables\n");
> > +}
> > +
> > static union host_lpi *gic_get_host_lpi(uint32_t plpi)
> > {
> > union host_lpi *block;
> > @@ -442,7 +458,7 @@ integer_param("max_lpi_bits", max_lpi_bits);
> > * to the page with the actual "union host_lpi" entries. Our LPI limit
> > * avoids excessive memory usage.
> > */
> > -int gicv3_lpi_init_host_lpis(unsigned int host_lpi_bits)
> > +int __init gicv3_lpi_init_host_lpis(unsigned int host_lpi_bits)
> > {
> > unsigned int nr_lpi_ptrs;
> > int rc;
> > @@ -450,6 +466,10 @@ int gicv3_lpi_init_host_lpis(unsigned int
> > host_lpi_bits)
> > /* We rely on the data structure being atomically accessible. */
> > BUILD_BUG_ON(sizeof(union host_lpi) > sizeof(unsigned long));
> >
> > + gicv3_lpi_collect_fw_attrs();
> > + if ( host_lpi_flags )
> > + printk("GICv3: host LPI workaround flags: %#x\n", host_lpi_flags);
> Every contributor to host_lpi_flags already prints its own line -
> "enabling workaround for ITS: %s" from the quirk path. Please drop this one.
I'll drop the aggregate host-LPI-flags message and keep the per-source
diagnostics.
Best regards,
Mykola
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |