[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 1/9] drm/arcpgu: replace struct drm_simple_display_pipe with regular atomic helpers


  • To: Ze Huang <ze.huang@xxxxxxxxxxxxxxxx>, Alexey Brodkin <abrodkin@xxxxxxxxxxxx>, Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>, Maxime Ripard <mripard@xxxxxxxxxx>, David Airlie <airlied@xxxxxxxxx>, Simona Vetter <simona@xxxxxxxx>, Joel Stanley <joel@xxxxxxxxx>, Andrew Jeffery <andrew@xxxxxxxxxxxxxxxxxxxx>, Frank Li <Frank.Li@xxxxxxx>, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>, Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>, Fabio Estevam <festevam@xxxxxxxxx>, Linus Walleij <linusw@xxxxxxxxxx>, Hans de Goede <hansg@xxxxxxxxxx>, Alex Lanzano <lanzano.alex@xxxxxxxxx>, Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
  • Date: Mon, 6 Jul 2026 10:01:12 +0200
  • Authentication-results: eu.smtp.expurgate.cloud; dkim=pass header.s=susede2_rsa header.d=suse.de header.i="@suse.de" header.h="From:Date:Message-ID:To:Cc:MIME-Version:Content-Type:Content-Transfer-Encoding:In-Reply-To:References:Autocrypt"; dkim=permerror header.s=susede2_ed25519 header.d=suse.de header.i="@suse.de"; dkim=pass header.s=susede2_rsa header.d=suse.de header.i="@suse.de" header.h="From:Date:Message-ID:To:Cc:MIME-Version:Content-Type:Content-Transfer-Encoding:In-Reply-To:References:Autocrypt"; dkim=permerror header.s=susede2_ed25519 header.d=suse.de header.i="@suse.de"
  • Authentication-results: smtp-out2.suse.de; none
  • Autocrypt: addr=tzimmermann@xxxxxxx; keydata= xsBNBFs50uABCADEHPidWt974CaxBVbrIBwqcq/WURinJ3+2WlIrKWspiP83vfZKaXhFYsdg XH47fDVbPPj+d6tQrw5lPQCyqjwrCPYnq3WlIBnGPJ4/jreTL6V+qfKRDlGLWFjZcsrPJGE0 BeB5BbqP5erN1qylK9i3gPoQjXGhpBpQYwRrEyQyjuvk+Ev0K1Jc5tVDeJAuau3TGNgah4Yc hdHm3bkPjz9EErV85RwvImQ1dptvx6s7xzwXTgGAsaYZsL8WCwDaTuqFa1d1jjlaxg6+tZsB 9GluwvIhSezPgnEmimZDkGnZRRSFiGP8yjqTjjWuf0bSj5rUnTGiyLyRZRNGcXmu6hjlABEB AAHNJ1Rob21hcyBaaW1tZXJtYW5uIDx0emltbWVybWFubkBzdXNlLmRlPsLAjgQTAQgAOAIb AwULCQgHAgYVCgkICwIEFgIDAQIeAQIXgBYhBHIX+6yM6c9jRKFo5WgNwR1TC3ojBQJftODH AAoJEGgNwR1TC3ojx1wH/0hKGWugiqDgLNXLRD/4TfHBEKmxIrmfu9Z5t7vwUKfwhFL6hqvo lXPJJKQpQ2z8+X2vZm/slsLn7J1yjrOsoJhKABDi+3QWWSGkaGwRJAdPVVyJMfJRNNNIKwVb U6B1BkX2XDKDGffF4TxlOpSQzdtNI/9gleOoUA8+jy8knnDYzjBNOZqLG2FuTdicBXblz0Mf vg41gd9kCwYXDnD91rJU8tzylXv03E75NCaTxTM+FBXPmsAVYQ4GYhhgFt8S2UWMoaaABLDe 7l5FdnLdDEcbmd8uLU2CaG4W2cLrUaI4jz2XbkcPQkqTQ3EB67hYkjiEE6Zy3ggOitiQGcqp j//OwE0EWznS4AEIAMYmP4M/V+T5RY5at/g7rUdNsLhWv1APYrh9RQefODYHrNRHUE9eosYb T6XMryR9hT8XlGOYRwKWwiQBoWSDiTMo/Xi29jUnn4BXfI2px2DTXwc22LKtLAgTRjP+qbU6 3Y0xnQN29UGDbYgyyK51DW3H0If2a3JNsheAAK+Xc9baj0LGIc8T9uiEWHBnCH+RdhgATnWW GKdDegUR5BkDfDg5O/FISymJBHx2Dyoklv5g4BzkgqTqwmaYzsl8UxZKvbaxq0zbehDda8lv hFXodNFMAgTLJlLuDYOGLK2AwbrS3Sp0AEbkpdJBb44qVlGm5bApZouHeJ/+n+7r12+lqdsA EQEAAcLAdgQYAQgAIAIbDBYhBHIX+6yM6c9jRKFo5WgNwR1TC3ojBQJftOH6AAoJEGgNwR1T C3ojVSkIALpAPkIJPQoURPb1VWjh34l0HlglmYHvZszJWTXYwavHR8+k6Baa6H7ufXNQtThR yIxJrQLW6rV5lm7TjhffEhxVCn37+cg0zZ3j7zIsSS0rx/aMwi6VhFJA5hfn3T0TtrijKP4A SAQO9xD1Zk9/61JWk8OysuIh7MXkl0fxbRKWE93XeQBhIJHQfnc+YBLprdnxR446Sh8Wn/2D Ya8cavuWf2zrB6cZurs048xe0UbSW5AOSo4V9M0jzYI4nZqTmPxYyXbm30Kvmz0rYVRaitYJ 4kyYYMhuULvrJDMjZRvaNe52tkKAvMevcGdt38H4KSVXAylqyQOW5zvPc4/sq9c=
  • Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, linux-aspeed@xxxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, imx@xxxxxxxxxxxxxxx, xen-devel@xxxxxxxxxxxxxxxxxxxx
  • Delivery-date: Mon, 06 Jul 2026 08:01:25 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xenproject.org>

Hi

Am 04.07.26 um 20:31 schrieb Ze Huang:
Instantiate plane, CRTC and encoder directly and wire them up with
standard atomic helpers.

This removes arcpgu's dependency on deprecated simple-KMS display pipe
interface.

Signed-off-by: Ze Huang <ze.huang@xxxxxxxxxxxxxxxx>
---
  drivers/gpu/drm/tiny/arcpgu.c | 165 +++++++++++++++++++++++++++++++++---------
  1 file changed, 131 insertions(+), 34 deletions(-)

diff --git a/drivers/gpu/drm/tiny/arcpgu.c b/drivers/gpu/drm/tiny/arcpgu.c
index c93d61ac0bb7..375cdb79e4e8 100644
--- a/drivers/gpu/drm/tiny/arcpgu.c
+++ b/drivers/gpu/drm/tiny/arcpgu.c
@@ -17,12 +17,12 @@
  #include <drm/drm_fbdev_dma.h>
  #include <drm/drm_fourcc.h>
  #include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
  #include <drm/drm_gem_dma_helper.h>
  #include <drm/drm_gem_framebuffer_helper.h>
  #include <drm/drm_module.h>
  #include <drm/drm_of.h>
  #include <drm/drm_probe_helper.h>
-#include <drm/drm_simple_kms_helper.h>
  #include <linux/dma-mapping.h>
  #include <linux/module.h>
  #include <linux/of_reserved_mem.h>
@@ -52,14 +52,14 @@ struct arcpgu_drm_private {
        struct drm_device       drm;
        void __iomem            *regs;
        struct clk              *clk;
-       struct drm_simple_display_pipe pipe;
+       struct drm_plane        plane;
+       struct drm_crtc         crtc;
+       struct drm_encoder      encoder;
        struct drm_connector    sim_conn;
  };
#define dev_to_arcpgu(x) container_of(x, struct arcpgu_drm_private, drm) -#define pipe_to_arcpgu_priv(x) container_of(x, struct arcpgu_drm_private, pipe)
-
  static inline void arc_pgu_write(struct arcpgu_drm_private *arcpgu,
                                 unsigned int reg, u32 value)
  {
@@ -117,7 +117,7 @@ static const u32 arc_pgu_supported_formats[] = {
static void arc_pgu_set_pxl_fmt(struct arcpgu_drm_private *arcpgu)
  {
-       const struct drm_framebuffer *fb = arcpgu->pipe.plane.state->fb;
+       const struct drm_framebuffer *fb = arcpgu->plane.state->fb;
        uint32_t pixel_format = fb->format->format;
        u32 format = DRM_FORMAT_INVALID;
        int i;
@@ -139,10 +139,10 @@ static void arc_pgu_set_pxl_fmt(struct arcpgu_drm_private 
*arcpgu)
        arc_pgu_write(arcpgu, ARCPGU_REG_CTRL, reg_ctrl);
  }
-static enum drm_mode_status arc_pgu_mode_valid(struct drm_simple_display_pipe *pipe,
-                                              const struct drm_display_mode 
*mode)
+static enum drm_mode_status arcpgu_crtc_helper_mode_valid(struct drm_crtc 
*crtc,
+                                                         const struct 
drm_display_mode *mode)
  {
-       struct arcpgu_drm_private *arcpgu = pipe_to_arcpgu_priv(pipe);
+       struct arcpgu_drm_private *arcpgu = dev_to_arcpgu(crtc->dev);
        long rate, clk_rate = mode->clock * 1000;
        long diff = clk_rate / 200; /* +-0.5% allowed by HDMI spec */
@@ -155,7 +155,7 @@ static enum drm_mode_status arc_pgu_mode_valid(struct drm_simple_display_pipe *p static void arc_pgu_mode_set(struct arcpgu_drm_private *arcpgu)
  {
-       struct drm_display_mode *m = &arcpgu->pipe.crtc.state->adjusted_mode;
+       struct drm_display_mode *m = &arcpgu->crtc.state->adjusted_mode;
        u32 val;
arc_pgu_write(arcpgu, ARCPGU_REG_FMT,
@@ -194,11 +194,10 @@ static void arc_pgu_mode_set(struct arcpgu_drm_private 
*arcpgu)
        clk_set_rate(arcpgu->clk, m->crtc_clock * 1000);
  }
-static void arc_pgu_enable(struct drm_simple_display_pipe *pipe,
-                          struct drm_crtc_state *crtc_state,
-                          struct drm_plane_state *plane_state)
+static void arcpgu_crtc_helper_atomic_enable(struct drm_crtc *crtc,
+                                            struct drm_atomic_commit *state)

Since you're adding these functions anew, please use 'commit' for the name of the drm_atomic_commit.  Here and everywhere else in the series.  You don't have to update existing functions, of course.

The name 'state' is a bit off here and comes from when drm_atomic_commit was still called drm_atomic_state.

CRTCs, plane, etc have state, but the update of these states is called commit.


  {
-       struct arcpgu_drm_private *arcpgu = pipe_to_arcpgu_priv(pipe);
+       struct arcpgu_drm_private *arcpgu = dev_to_arcpgu(crtc->dev);
arc_pgu_mode_set(arcpgu); @@ -208,9 +207,10 @@ static void arc_pgu_enable(struct drm_simple_display_pipe *pipe,
                      ARCPGU_CTRL_ENABLE_MASK);
  }
-static void arc_pgu_disable(struct drm_simple_display_pipe *pipe)
+static void arcpgu_crtc_helper_atomic_disable(struct drm_crtc *crtc,
+                                             struct drm_atomic_commit *state)
  {
-       struct arcpgu_drm_private *arcpgu = pipe_to_arcpgu_priv(pipe);
+       struct arcpgu_drm_private *arcpgu = dev_to_arcpgu(crtc->dev);
clk_disable_unprepare(arcpgu->clk);
        arc_pgu_write(arcpgu, ARCPGU_REG_CTRL,
@@ -218,35 +218,106 @@ static void arc_pgu_disable(struct 
drm_simple_display_pipe *pipe)
                              ~ARCPGU_CTRL_ENABLE_MASK);
  }
-static void arc_pgu_update(struct drm_simple_display_pipe *pipe,
-                          struct drm_plane_state *state)
+static void arcpgu_plane_helper_atomic_update(struct drm_plane *plane,
+                                             struct drm_atomic_commit *state)
  {
        struct arcpgu_drm_private *arcpgu;
        struct drm_gem_dma_object *gem;
- if (!pipe->plane.state->fb)
+       if (!plane->state->fb)
                return;
- arcpgu = pipe_to_arcpgu_priv(pipe);
-       gem = drm_fb_dma_get_gem_obj(pipe->plane.state->fb, 0);
+       arcpgu = dev_to_arcpgu(plane->dev);
+       gem = drm_fb_dma_get_gem_obj(plane->state->fb, 0);
        arc_pgu_write(arcpgu, ARCPGU_REG_BUF0_ADDR, gem->dma_addr);
  }
-static const struct drm_simple_display_pipe_funcs arc_pgu_pipe_funcs = {
-       .update = arc_pgu_update,
-       .mode_valid = arc_pgu_mode_valid,
-       .enable = arc_pgu_enable,
-       .disable = arc_pgu_disable,
-};
-
  static const struct drm_mode_config_funcs arcpgu_drm_modecfg_funcs = {
-       .fb_create  = drm_gem_fb_create,
+       .fb_create = drm_gem_fb_create,
        .atomic_check = drm_atomic_helper_check,
        .atomic_commit = drm_atomic_helper_commit,
  };
DEFINE_DRM_GEM_DMA_FOPS(arcpgu_drm_ops); +static int arcpgu_plane_helper_atomic_check(struct drm_plane *plane,
+                                           struct drm_atomic_commit *state)
+{
+       struct drm_plane_state *plane_state = 
drm_atomic_get_new_plane_state(state, plane);
+       struct drm_crtc *crtc = plane_state->crtc;
+       struct drm_crtc_state *crtc_state = NULL;
+       int ret;
+
+       if (crtc)
+               crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+
+       ret = drm_atomic_helper_check_plane_state(plane_state, crtc_state,
+                                                 DRM_PLANE_NO_SCALING,
+                                                 DRM_PLANE_NO_SCALING,
+                                                 false, false);
+       return ret;


Return directly here.


+}
+
+static const struct drm_plane_helper_funcs arcpgu_plane_helper_funcs = {
+       .prepare_fb     = drm_gem_plane_helper_prepare_fb,
+       .atomic_check   = arcpgu_plane_helper_atomic_check,
+       .atomic_update  = arcpgu_plane_helper_atomic_update,
+};
+
+static bool arcpgu_plane_format_mod_supported(struct drm_plane *plane,
+                                             u32 format,
+                                             u64 modifier)
+{
+       return modifier == DRM_FORMAT_MOD_LINEAR;
+}

Please remove this function. It doesn't really do anything besides DRM's standard behavior.

+
+static const struct drm_plane_funcs arcpgu_plane_funcs = {
+       .update_plane           = drm_atomic_helper_update_plane,
+       .disable_plane          = drm_atomic_helper_disable_plane,
+       .destroy                = drm_plane_cleanup,
+       .reset                  = drm_atomic_helper_plane_reset,
+       .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
+       .atomic_destroy_state   = drm_atomic_helper_plane_destroy_state,
+       .format_mod_supported   = arcpgu_plane_format_mod_supported,
+};
+
+static int arcpgu_crtc_helper_atomic_check(struct drm_crtc *crtc,
+                                          struct drm_atomic_commit *state)
+{
+       struct drm_crtc_state *crtc_state = 
drm_atomic_get_new_crtc_state(state, crtc);
+       int ret;
+
+       if (!crtc_state->enable)
+               goto out;
+
+       ret = drm_atomic_helper_check_crtc_primary_plane(crtc_state);
+       if (ret)
+               return ret;
+
+out:
+       return drm_atomic_add_affected_planes(state, crtc);

Instead of using out, I'd rather use

  if (crtc->enable) {
      //do checks
  }

  return add_affected planes.

Seems more natural to me.

+}
+
+static const struct drm_crtc_helper_funcs arcpgu_crtc_helper_funcs = {
+       .mode_valid     = arcpgu_crtc_helper_mode_valid,
+       .atomic_check   = arcpgu_crtc_helper_atomic_check,
+       .atomic_enable  = arcpgu_crtc_helper_atomic_enable,
+       .atomic_disable = arcpgu_crtc_helper_atomic_disable,
+};
+
+static const struct drm_crtc_funcs arcpgu_crtc_funcs = {
+       .reset                  = drm_atomic_helper_crtc_reset,
+       .destroy                = drm_crtc_cleanup,
+       .set_config             = drm_atomic_helper_set_config,
+       .page_flip              = drm_atomic_helper_page_flip,
+       .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+       .atomic_destroy_state   = drm_atomic_helper_crtc_destroy_state,
+};
+
+static const struct drm_encoder_funcs arcpgu_encoder_funcs = {
+       .destroy = drm_encoder_cleanup,
+};
+
  static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
  {
        struct platform_device *pdev = to_platform_device(arcpgu->drm.dev);
@@ -254,6 +325,9 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
        struct device_node *endpoint_node = NULL;
        struct drm_connector *connector = NULL;
        struct drm_device *drm = &arcpgu->drm;
+       struct drm_plane *plane;
+       struct drm_encoder *encoder;
+       struct drm_crtc *crtc;
        int ret;
arcpgu->clk = devm_clk_get(drm->dev, "pxlclk");
@@ -301,12 +375,35 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
                        return ret;
        }
- ret = drm_simple_display_pipe_init(drm, &arcpgu->pipe, &arc_pgu_pipe_funcs,
-                                          arc_pgu_supported_formats,
-                                          
ARRAY_SIZE(arc_pgu_supported_formats),
-                                          NULL, connector);
+       plane = &arcpgu->plane;
+       ret = drm_universal_plane_init(drm, plane, 0,
+                                      &arcpgu_plane_funcs,
+                                      arc_pgu_supported_formats,
+                                      ARRAY_SIZE(arc_pgu_supported_formats),
+                                      NULL,
+                                      DRM_PLANE_TYPE_PRIMARY, NULL);
        if (ret)
                return ret;
+       drm_plane_helper_add(plane, &arcpgu_plane_helper_funcs);
+
+       crtc = &arcpgu->crtc;
+       ret = drm_crtc_init_with_planes(drm, crtc, plane, NULL,
+                                       &arcpgu_crtc_funcs, NULL);
+       if (ret)
+               return ret;
+       drm_crtc_helper_add(crtc, &arcpgu_crtc_helper_funcs);
+
+       encoder = &arcpgu->encoder;
+       ret = drm_encoder_init(drm, encoder, &arcpgu_encoder_funcs, 
DRM_MODE_ENCODER_NONE, NULL);
+       if (ret)
+               return ret;
+       encoder->possible_crtcs = drm_crtc_mask(crtc);


I think plane, CRTC, and encoder should go before testing the encoder_node at [1].

Then comes the encoder_node test.  If true, do a single encoder-node branch,  or else to a single connector-based branch.   That would simplify the overall logic in this helper.

[1] https://elixir.bootlin.com/linux/v7.1.2/source/drivers/gpu/drm/tiny/arcpgu.c#L287


+
+       if (connector) {
+               ret = drm_connector_attach_encoder(connector, encoder);
+               if (ret)
+                       return ret;
+       }
if (encoder_node) {
                /* Locate drm bridge from the hdmi encoder DT node */
@@ -315,7 +412,7 @@ static int arcpgu_load(struct arcpgu_drm_private *arcpgu)
                if (!bridge)
                        return -EPROBE_DEFER;
- ret = drm_simple_display_pipe_attach_bridge(&arcpgu->pipe, bridge);
+               ret = drm_bridge_attach(encoder, bridge, NULL, 0);
                if (ret)
                        return ret;
        }
@@ -342,7 +439,7 @@ static int arcpgu_show_pxlclock(struct seq_file *m, void 
*arg)
        struct drm_device *drm = node->minor->dev;
        struct arcpgu_drm_private *arcpgu = dev_to_arcpgu(drm);
        unsigned long clkrate = clk_get_rate(arcpgu->clk);
-       unsigned long mode_clock = arcpgu->pipe.crtc.mode.crtc_clock * 1000;
+       unsigned long mode_clock = arcpgu->crtc.mode.crtc_clock * 1000;

Here, mode is an obsolete field. The correct field is crtc->state->mode.

Best regards
Thomas

seq_printf(m, "hw : %lu\n", clkrate);
        seq_printf(m, "mode: %lu\n", mode_clock);


--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)





 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.