Re: Issues on Zen4 (hw12) runner

[Roger Pau Monné <roger.pau@xxxxxxxxxx>]

On Thu, May 08, 2025 at 10:44:36PM +0200, Marek Marczykowski-Górecki wrote:
> Hi,
> 
> I wanted to post another revision of the series adding hw12 runner,
> hoping that all known issues are fixed now, but unfortunately there is
> still something broken. I've rebased my series on top of staging
> (ed9488a0d) and got this pipeline:
> 
> https://gitlab.com/xen-project/people/marmarek/xen/-/pipelines/1807819142
> (note due to some added debugging, some tests are incorrectly marked as
> success even if they failed...)
> 
> 1. USB ethernet doesn't work on PVH dom0: 
> https://gitlab.com/xen-project/people/marmarek/xen/-/jobs/9978694739
> There supposed to be an USB ethernet device connected to the USB
> controller at c3:00.4. In the PV dom0 case it's detected as:
> 
>     [    3.911555] usb 7-1.4: new high-speed USB device number 3 using 
> xhci_hcd
>     [    4.004201] usb 7-1.4: New USB device found, idVendor=0bda, 
> idProduct=8153, bcdDevice=30.00
>     [    4.004675] usb 7-1.4: New USB device strings: Mfr=1, Product=2, 
> SerialNumber=6
>     [    4.005079] usb 7-1.4: Product: USB 10/100/1000 LAN
>     [    4.005349] usb 7-1.4: Manufacturer: Realtek
>     [    4.005599] usb 7-1.4: SerialNumber: 684D35
> 
> But it's not there on PVH. The USB controller itself is detected, just
> not device(s) connected to it. This applies to other controllers too
> (there should be about 3 or 4 other USB devices - none of them show up).
> 
> 2. There is a bunch of "unhandled memory read" errors during PVH dom0
> startup: https://gitlab.com/xen-project/people/marmarek/xen/-/jobs/9978694739
> 
>     (XEN) [    4.026323] arch/x86/hvm/emulate.c:417:d0v0 unhandled memory 
> read from 0xfedc0020 size 1
>     (XEN) [    4.026789] arch/x86/hvm/emulate.c:417:d0v0 unhandled memory 
> read from 0xfedc0021 size 1
>     (XEN) [    4.027247] arch/x86/hvm/emulate.c:417:d0v0 unhandled memory 
> read from 0xfedc0020 size 1
>     (XEN) [    4.027671] arch/x86/hvm/emulate.c:417:d0v0 unhandled memory 
> read from 0xfedc0021 size 1
>     ...
> 
> This repeats several times. Could be related to the USB issue above?

Can you try with dom0=pf-fixup?  Those unhandled accesses might be the
cause of the USB issues.

> There is also, likely related:
> 
>     (XEN) [    5.002036] arch/x86/hvm/vmsi.c:845:d0v9 0000:c1:00.1: PIRQ 
> 2484: unsupported address 0
>     (XEN) [    5.002365] arch/x86/hvm/vmsi.c:845:d0v9 0000:c1:00.1: PIRQ 
> 2484: unsupported address 0
>     (XEN) [    5.002693] arch/x86/hvm/vmsi.c:845:d0v9 0000:c1:00.1: PIRQ 
> 2484: unsupported address 0

Is this at shutdown? (doesn't look like by the timestamps).  There are
cases where Linux zeroes the MSR entries while the capability is still
enabled, and that results in those messages.  They are usually benign.

> 
> 3. Sometimes it fails to print anything on the console, like here: 
> https://gitlab.com/xen-project/people/marmarek/xen/-/jobs/9977761447
> This is likely some boot issue before Xen starts (possibly the power button
> is pressed to early). Anyway, I need to fix it before adding the runner.

That needs further debug, I'm afraid I can't provide much suggestions.

Thanks, Roger.