[PATCH 3/4] [EXAMPLE] Changes done by clang-format to the previous commit

[Oleksandr Andrushchenko <andr2000@xxxxxxxxx>]

This patch is the result of the:

$ git-clang-format --style=file --verbose HEAD~1
Running clang-format on the following files:
    tools/xl/xl_info.c
    xen/drivers/char/ns16550.c
old tree: dceb97b3ef3c80cbb9c29311a7f5783df2f69127
new tree: a8d36f8f45c3ee0d75e674ecda102ffc6a0a0ef3
changed files:
    xen/drivers/char/ns16550.c

It is seen that only xen/ part of the patch was touched. The result can
still be manually adjusted before committing.

Signed-off-by: Oleksandr Andrushchenko <andr2000@xxxxxxxxx>
---
 xen/drivers/char/ns16550.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/xen/drivers/char/ns16550.c b/xen/drivers/char/ns16550.c
index 53586f110008..4d79ef2b08bc 100644
--- a/xen/drivers/char/ns16550.c
+++ b/xen/drivers/char/ns16550.c
@@ -340,7 +340,9 @@ static void ns16550_setup_preirq(struct ns16550 *uart)
         if ( divisor )
             uart->baud = uart->clock_hz / (divisor << 4);
         else
-            printk(XENLOG_ERR "Automatic baud rate determination was 
requested,"  " but a baud rate was not set up\n");
+            printk(
+                XENLOG_ERR
+                "Automatic baud rate determination was requested," " but a 
baud rate was not set up\n");
     }
     ns_write_reg(uart, UART_LCR, lcr);
 
@@ -348,8 +350,9 @@ static void ns16550_setup_preirq(struct ns16550 *uart)
     ns_write_reg(uart, UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
 
     /* Enable and clear the FIFOs. Set a large trigger threshold. */
-    ns_write_reg(uart, UART_FCR, UART_FCR_ENABLE | UART_FCR_CLRX |
-                 UART_FCR_CLTX | UART_FCR_TRG14);
+    ns_write_reg(uart, UART_FCR,
+                 UART_FCR_ENABLE | UART_FCR_CLRX | UART_FCR_CLTX |
+                     UART_FCR_TRG14);
 }
 
 static void __init cf_check ns16550_init_preirq(struct serial_port *port)
-- 
2.25.1