[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v2 00/11] amd-cppc CPU Performance Scaling Driver
amd-cppc is the AMD CPU performance scaling driver that introduces a new CPU frequency control mechanism on modern AMD APU and CPU series in Xen. The new mechanism is based on Collaborative Processor Performance Control (CPPC) which provides finer grain frequency management than legacy ACPI hardware P-States. Current AMD CPU/APU platforms are using the ACPI P-states driver to manage CPU frequency and clocks with switching only in 3 P-states. CPPC replaces the ACPI P-states controls and allows a flexible, low-latency interface for Xen to directly communicate the performance hints to hardware. amd_cppc driver has 2 operation modes: autonomous (active) mode, and non-autonomous (passive) mode. We register different CPUFreq driver for different modes, "amd-cppc" for passive mode and "amd-cppc-epp" for active mode. The passive mode leverages common governors such as *ondemand*, *performance*, etc, to manage the performance hints. And the active mode uses epp to provides a hint to the hardware if software wants to bias toward performance (0x0) or energy efficiency (0xff). CPPC power algorithm in hardware will automatically calculate the runtime workload and adjust the realtime cpu cores frequency according to the power supply and thermal, core voltage and some other hardware conditions. amd-cppc is enabled on passive mode with a top-level `cpufreq=amd-cppc` option, while users add extra `active` flag to select active mode. It will fallback to `cpufreq=xen` if amd-cppc feature is unavailable on hardware. With `cpufreq=amd-cppc,active`, we did a 60s sampling test to see the CPU frequency change, through tweaking the energy_perf preference from `xenpm set-cpufreq-cppc powersave` to `xenpm set-cpufreq-cppc performance`. The outputs are as follows: ``` Setting CPU in powersave mode Sampling and Outputs: Avg freq 2000000 KHz Avg freq 2000000 KHz Avg freq 2000000 KHz Setting CPU in performance mode Sampling and Outputs: Avg freq 4640000 KHz Avg freq 4220000 KHz Avg freq 4640000 KHz ``` Penny Zheng (11): xen/x86: add CPPC feature flag for AMD processors xen/x86: introduce new sub-hypercall to propagate CPPC data xen/x86: introduce "cpufreq=amd-cppc" xen cmdline xen/amd: export processor max frequency value xen/x86: introduce a new amd cppc driver for cpufreq scaling xen/cpufreq: only set gov NULL when cpufreq_driver.setpolicy is NULL x86/cpufreq: add "cpufreq=amd-cppc,active" para xen/cpufreq: abstract Energy Performance Preference value xen/x86: implement EPP support for the amd-cppc driver in active mode tools/xenpm: Print CPPC parameters for amd-cppc driver xen/cpufreq: Adapt SET/GET_CPUFREQ_CPPC xen_sysctl_pm_op for amd-cppc driver docs/misc/xen-command-line.pandoc | 14 +- tools/misc/xenpm.c | 18 +- xen/arch/x86/acpi/cpufreq/Makefile | 1 + xen/arch/x86/acpi/cpufreq/amd-cppc.c | 678 ++++++++++++++++++++ xen/arch/x86/acpi/cpufreq/cpufreq.c | 32 +- xen/arch/x86/acpi/cpufreq/hwp.c | 10 +- xen/arch/x86/cpu/amd.c | 7 + xen/arch/x86/include/asm/amd.h | 1 + xen/arch/x86/include/asm/cpufeature.h | 1 + xen/arch/x86/platform_hypercall.c | 10 + xen/arch/x86/x86_64/cpufreq.c | 2 + xen/drivers/acpi/pmstat.c | 20 +- xen/drivers/cpufreq/cpufreq.c | 69 +- xen/drivers/cpufreq/utility.c | 11 + xen/include/acpi/cpufreq/cpufreq.h | 31 + xen/include/acpi/cpufreq/processor_perf.h | 1 + xen/include/public/arch-x86/cpufeatureset.h | 1 + xen/include/public/platform.h | 17 + xen/include/public/sysctl.h | 2 + xen/include/xen/pmstat.h | 1 + xen/include/xlat.lst | 1 + 21 files changed, 907 insertions(+), 21 deletions(-) create mode 100644 xen/arch/x86/acpi/cpufreq/amd-cppc.c -- 2.34.1
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |