|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v1 1/9] xen/common: dom0less: make some parts of Arm's CONFIG_DOM0LESS common
Unify the API for creating DomUs and checking for Dom0less mode across
architectures, including Arm and RISC-V, with potential applicability
for PPC.
Move dom0less-build.h from the Arm-specific directory to asm-generic
as these header is expected to be the same across acrhictectures with
some updates: add the following declaration of construct_domU(),
arch_xen_domctl_createdomain() and arch_create_domus() as there are
some parts which are still architecture-specific.
Relocate the CONFIG_DOM0LESS configuration to the common with adding
"depends on Arm" to not break builds for architectures which at the
moment don't support CONFIG_DOM0LESS config, especically it would be
useful to not provide stubs for construct_domU(),
arch_xen_domctl_createdomain() and arch_create_domus() in case of
*-randconfig which may set CONFIG_DOM0LESS=y.
Move is_dom0less_mode() function to the common code, as it depends on
boot modules that are already part of the common code.
Move create_domUs() function to the common code with some updates:
- Add function arch_xen_domctl_createdomain() as structure
xen_domctl_createdomain may have some arch-spicific information and
initialization.
- Add arch_create_domus() to cover parsing of arch-specific features,
for example, SVE (Scalar Vector Extension ) exists only in Arm.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
---
xen/arch/arm/Kconfig | 8 -
xen/arch/arm/dom0less-build.c | 270 ++++++----------------
xen/arch/arm/include/asm/Makefile | 1 +
xen/arch/arm/include/asm/dom0less-build.h | 32 ---
xen/common/Kconfig | 9 +
xen/common/device-tree/Makefile | 1 +
xen/common/device-tree/dom0less-build.c | 161 +++++++++++++
xen/include/asm-generic/dom0less-build.h | 40 ++++
8 files changed, 283 insertions(+), 239 deletions(-)
delete mode 100644 xen/arch/arm/include/asm/dom0less-build.h
create mode 100644 xen/common/device-tree/dom0less-build.c
create mode 100644 xen/include/asm-generic/dom0less-build.h
diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
index a26d3e1182..eff6ea6b6d 100644
--- a/xen/arch/arm/Kconfig
+++ b/xen/arch/arm/Kconfig
@@ -117,14 +117,6 @@ config GICV2
Driver for the ARM Generic Interrupt Controller v2.
If unsure, say Y
-config DOM0LESS_BOOT
- bool "Dom0less boot support" if EXPERT
- default y
- help
- Dom0less boot support enables Xen to create and start domU guests
during
- Xen boot without the need of a control domain (Dom0), which could be
- present anyway.
-
config GICV3
bool "GICv3 driver"
depends on !NEW_VGIC
diff --git a/xen/arch/arm/dom0less-build.c b/xen/arch/arm/dom0less-build.c
index 49d1f14d65..b27747c05c 100644
--- a/xen/arch/arm/dom0less-build.c
+++ b/xen/arch/arm/dom0less-build.c
@@ -17,38 +17,6 @@
#include <asm/static-memory.h>
#include <asm/static-shmem.h>
-bool __init is_dom0less_mode(void)
-{
- struct bootmodules *mods = &bootinfo.modules;
- struct bootmodule *mod;
- unsigned int i;
- bool dom0found = false;
- bool domUfound = false;
-
- /* Look into the bootmodules */
- for ( i = 0 ; i < mods->nr_mods ; i++ )
- {
- mod = &mods->module[i];
- /* Find if dom0 and domU kernels are present */
- if ( mod->kind == BOOTMOD_KERNEL )
- {
- if ( mod->domU == false )
- {
- dom0found = true;
- break;
- }
- else
- domUfound = true;
- }
- }
-
- /*
- * If there is no dom0 kernel but at least one domU, then we are in
- * dom0less mode
- */
- return ( !dom0found && domUfound );
-}
-
#ifdef CONFIG_VGICV2
static int __init make_gicv2_domU_node(struct kernel_info *kinfo)
{
@@ -704,8 +672,8 @@ static int __init alloc_xenstore_evtchn(struct domain *d)
return 0;
}
-static int __init construct_domU(struct domain *d,
- const struct dt_device_node *node)
+int __init construct_domU(struct domain *d,
+ const struct dt_device_node *node)
{
struct kernel_info kinfo = KERNEL_INFO_INIT;
const char *dom0less_enhanced;
@@ -810,188 +778,92 @@ static int __init construct_domU(struct domain *d,
return rc;
}
-void __init create_domUs(void)
-{
- struct dt_device_node *node;
- const char *dom0less_iommu;
- bool iommu = false;
- const struct dt_device_node *cpupool_node,
- *chosen = dt_find_node_by_path("/chosen");
- const char *llc_colors_str = NULL;
-
- BUG_ON(chosen == NULL);
- dt_for_each_child_node(chosen, node)
- {
- struct domain *d;
- struct xen_domctl_createdomain d_cfg = {
- .arch.gic_version = XEN_DOMCTL_CONFIG_GIC_NATIVE,
- .flags = XEN_DOMCTL_CDF_hvm | XEN_DOMCTL_CDF_hap,
- /*
- * The default of 1023 should be sufficient for guests because
- * on ARM we don't bind physical interrupts to event channels.
- * The only use of the evtchn port is inter-domain communications.
- * 1023 is also the default value used in libxl.
- */
- .max_evtchn_port = 1023,
- .max_grant_frames = -1,
- .max_maptrack_frames = -1,
- .grant_opts = XEN_DOMCTL_GRANT_version(opt_gnttab_max_version),
- };
- unsigned int flags = 0U;
- uint32_t val;
- int rc;
-
- if ( !dt_device_is_compatible(node, "xen,domain") )
- continue;
- if ( (max_init_domid + 1) >= DOMID_FIRST_RESERVED )
- panic("No more domain IDs available\n");
-
- if ( dt_find_property(node, "xen,static-mem", NULL) )
- {
- if ( llc_coloring_enabled )
- panic("LLC coloring and static memory are incompatible\n");
-
- flags |= CDF_staticmem;
- }
-
- if ( dt_property_read_bool(node, "direct-map") )
- {
- if ( !(flags & CDF_staticmem) )
- panic("direct-map is not valid for domain %s without static
allocation.\n",
- dt_node_name(node));
-
- flags |= CDF_directmap;
- }
-
- if ( !dt_property_read_u32(node, "cpus", &d_cfg.max_vcpus) )
- panic("Missing property 'cpus' for domain %s\n",
- dt_node_name(node));
-
- if ( !dt_property_read_string(node, "passthrough", &dom0less_iommu) &&
- !strcmp(dom0less_iommu, "enabled") )
- iommu = true;
+struct xen_domctl_createdomain __init arch_xen_domctl_createdomain(void)
+{
+ struct xen_domctl_createdomain d_cfg = {
+ .arch.gic_version = XEN_DOMCTL_CONFIG_GIC_NATIVE,
+ .flags = XEN_DOMCTL_CDF_hvm | XEN_DOMCTL_CDF_hap,
+ /*
+ * The default of 1023 should be sufficient for guests because
+ * on ARM we don't bind physical interrupts to event channels.
+ * The only use of the evtchn port is inter-domain communications.
+ * 1023 is also the default value used in libxl.
+ */
+ .max_evtchn_port = 1023,
+ .max_grant_frames = -1,
+ .max_maptrack_frames = -1,
+ .grant_opts = XEN_DOMCTL_GRANT_version(opt_gnttab_max_version),
+ };
+
+ return d_cfg;
+}
- if ( iommu_enabled &&
- (iommu || dt_find_compatible_node(node, NULL,
- "multiboot,device-tree")) )
- d_cfg.flags |= XEN_DOMCTL_CDF_iommu;
+void __init arch_create_domus(struct dt_device_node *node,
+ struct xen_domctl_createdomain *d_cfg,
+ unsigned int flags)
+{
+ uint32_t val;
- if ( !dt_property_read_u32(node, "nr_spis", &d_cfg.arch.nr_spis) )
- {
- int vpl011_virq = GUEST_VPL011_SPI;
-
- d_cfg.arch.nr_spis = gic_number_lines() - 32;
-
- /*
- * The VPL011 virq is GUEST_VPL011_SPI, unless direct-map is
- * set, in which case it'll match the hardware.
- *
- * Since the domain is not yet created, we can't use
- * d->arch.vpl011.irq. So the logic to find the vIRQ has to
- * be hardcoded.
- * The logic here shall be consistent with the one in
- * domain_vpl011_init().
- */
- if ( flags & CDF_directmap )
- {
- vpl011_virq = serial_irq(SERHND_DTUART);
- if ( vpl011_virq < 0 )
- panic("Error getting IRQ number for this serial port %d\n",
- SERHND_DTUART);
- }
+ if ( !dt_property_read_u32(node, "nr_spis", &d_cfg->arch.nr_spis) )
+ {
+ int vpl011_virq = GUEST_VPL011_SPI;
- /*
- * vpl011 uses one emulated SPI. If vpl011 is requested, make
- * sure that we allocate enough SPIs for it.
- */
- if ( dt_property_read_bool(node, "vpl011") )
- d_cfg.arch.nr_spis = MAX(d_cfg.arch.nr_spis,
- vpl011_virq - 32 + 1);
- }
+ d_cfg->arch.nr_spis = gic_number_lines() - 32;
- /* Get the optional property domain-cpupool */
- cpupool_node = dt_parse_phandle(node, "domain-cpupool", 0);
- if ( cpupool_node )
+ /*
+ * The VPL011 virq is GUEST_VPL011_SPI, unless direct-map is
+ * set, in which case it'll match the hardware.
+ *
+ * Since the domain is not yet created, we can't use
+ * d->arch.vpl011.irq. So the logic to find the vIRQ has to
+ * be hardcoded.
+ * The logic here shall be consistent with the one in
+ * domain_vpl011_init().
+ */
+ if ( flags & CDF_directmap )
{
- int pool_id = btcpupools_get_domain_pool_id(cpupool_node);
- if ( pool_id < 0 )
- panic("Error getting cpupool id from domain-cpupool (%d)\n",
- pool_id);
- d_cfg.cpupool_id = pool_id;
+ vpl011_virq = serial_irq(SERHND_DTUART);
+ if ( vpl011_virq < 0 )
+ panic("Error getting IRQ number for this serial port %d\n",
+ SERHND_DTUART);
}
- if ( dt_property_read_u32(node, "max_grant_version", &val) )
- d_cfg.grant_opts = XEN_DOMCTL_GRANT_version(val);
+ /*
+ * vpl011 uses one emulated SPI. If vpl011 is requested, make
+ * sure that we allocate enough SPIs for it.
+ */
+ if ( dt_property_read_bool(node, "vpl011") )
+ d_cfg->arch.nr_spis = MAX(d_cfg->arch.nr_spis,
+ vpl011_virq - 32 + 1);
+ }
- if ( dt_property_read_u32(node, "max_grant_frames", &val) )
- {
- if ( val > INT32_MAX )
- panic("max_grant_frames (%"PRIu32") overflow\n", val);
- d_cfg.max_grant_frames = val;
- }
+ if ( dt_get_property(node, "sve", &val) )
+ {
+#ifdef CONFIG_ARM64_SVE
+ unsigned int sve_vl_bits;
+ bool ret = false;
- if ( dt_property_read_u32(node, "max_maptrack_frames", &val) )
+ if ( !val )
{
- if ( val > INT32_MAX )
- panic("max_maptrack_frames (%"PRIu32") overflow\n", val);
- d_cfg.max_maptrack_frames = val;
+ /* Property found with no value, means max HW VL supported */
+ ret = sve_domctl_vl_param(-1, &sve_vl_bits);
}
-
- if ( dt_get_property(node, "sve", &val) )
+ else
{
-#ifdef CONFIG_ARM64_SVE
- unsigned int sve_vl_bits;
- bool ret = false;
-
- if ( !val )
- {
- /* Property found with no value, means max HW VL supported */
- ret = sve_domctl_vl_param(-1, &sve_vl_bits);
- }
+ if ( dt_property_read_u32(node, "sve", &val) )
+ ret = sve_domctl_vl_param(val, &sve_vl_bits);
else
- {
- if ( dt_property_read_u32(node, "sve", &val) )
- ret = sve_domctl_vl_param(val, &sve_vl_bits);
- else
- panic("Error reading 'sve' property\n");
- }
+ panic("Error reading 'sve' property\n");
+ }
- if ( ret )
- d_cfg.arch.sve_vl = sve_encode_vl(sve_vl_bits);
- else
- panic("SVE vector length error\n");
+ if ( ret )
+ d_cfg->arch.sve_vl = sve_encode_vl(sve_vl_bits);
+ else
+ panic("SVE vector length error\n");
#else
- panic("'sve' property found, but CONFIG_ARM64_SVE not selected\n");
+ panic("'sve' property found, but CONFIG_ARM64_SVE not selected\n");
#endif
- }
-
- dt_property_read_string(node, "llc-colors", &llc_colors_str);
- if ( !llc_coloring_enabled && llc_colors_str )
- panic("'llc-colors' found, but LLC coloring is disabled\n");
-
- /*
- * The variable max_init_domid is initialized with zero, so here it's
- * very important to use the pre-increment operator to call
- * domain_create() with a domid > 0. (domid == 0 is reserved for Dom0)
- */
- d = domain_create(++max_init_domid, &d_cfg, flags);
- if ( IS_ERR(d) )
- panic("Error creating domain %s (rc = %ld)\n",
- dt_node_name(node), PTR_ERR(d));
-
- if ( llc_coloring_enabled &&
- (rc = domain_set_llc_colors_from_str(d, llc_colors_str)) )
- panic("Error initializing LLC coloring for domain %s (rc = %d)\n",
- dt_node_name(node), rc);
-
- d->is_console = true;
- dt_device_set_used_by(node, d->domain_id);
-
- rc = construct_domU(d, node);
- if ( rc )
- panic("Could not set up domain %s (rc = %d)\n",
- dt_node_name(node), rc);
}
}
diff --git a/xen/arch/arm/include/asm/Makefile
b/xen/arch/arm/include/asm/Makefile
index 4a4036c951..831c914cce 100644
--- a/xen/arch/arm/include/asm/Makefile
+++ b/xen/arch/arm/include/asm/Makefile
@@ -1,6 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
generic-y += altp2m.h
generic-y += device.h
+generic-y += dom0less-build.h
generic-y += hardirq.h
generic-y += iocap.h
generic-y += paging.h
diff --git a/xen/arch/arm/include/asm/dom0less-build.h
b/xen/arch/arm/include/asm/dom0less-build.h
deleted file mode 100644
index 5864944bda..0000000000
--- a/xen/arch/arm/include/asm/dom0less-build.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#ifndef __ASM_DOM0LESS_BUILD_H_
-#define __ASM_DOM0LESS_BUILD_H_
-
-#include <xen/stdbool.h>
-
-#ifdef CONFIG_DOM0LESS_BOOT
-
-void create_domUs(void);
-bool is_dom0less_mode(void);
-
-#else /* !CONFIG_DOM0LESS_BOOT */
-
-static inline void create_domUs(void) {}
-static inline bool is_dom0less_mode(void)
-{
- return false;
-}
-
-#endif /* CONFIG_DOM0LESS_BOOT */
-
-#endif /* __ASM_DOM0LESS_BUILD_H_ */
-
-/*
- * Local variables:
- * mode: C
- * c-file-style: "BSD"
- * c-basic-offset: 4
- * indent-tabs-mode: nil
- * End:
- */
diff --git a/xen/common/Kconfig b/xen/common/Kconfig
index 6166327f4d..099e6e72ad 100644
--- a/xen/common/Kconfig
+++ b/xen/common/Kconfig
@@ -12,6 +12,15 @@ config CORE_PARKING
bool
depends on NR_CPUS > 1
+config DOM0LESS_BOOT
+ bool "Dom0less boot support" if EXPERT
+ depends on ARM
+ default ARM
+ help
+ Dom0less boot support enables Xen to create and start domU guests
during
+ Xen boot without the need of a control domain (Dom0), which could be
+ present anyway.
+
config GRANT_TABLE
bool "Grant table support" if EXPERT
default y
diff --git a/xen/common/device-tree/Makefile b/xen/common/device-tree/Makefile
index 7c549be38a..f3dafc9b81 100644
--- a/xen/common/device-tree/Makefile
+++ b/xen/common/device-tree/Makefile
@@ -1,5 +1,6 @@
obj-y += bootfdt.init.o
obj-y += bootinfo.init.o
obj-y += device-tree.o
+obj-$(CONFIG_DOM0LESS_BOOT) += dom0less-build.o
obj-$(CONFIG_OVERLAY_DTB) += dt-overlay.o
obj-y += intc.o
diff --git a/xen/common/device-tree/dom0less-build.c
b/xen/common/device-tree/dom0less-build.c
new file mode 100644
index 0000000000..19bfa5e005
--- /dev/null
+++ b/xen/common/device-tree/dom0less-build.c
@@ -0,0 +1,161 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include <xen/bootfdt.h>
+#include <xen/device_tree.h>
+#include <xen/domain.h>
+#include <xen/err.h>
+#include <xen/init.h>
+#include <xen/iommu.h>
+#include <xen/llc-coloring.h>
+#include <xen/sched.h>
+#include <xen/stdbool.h>
+#include <xen/types.h>
+
+#include <public/domctl.h>
+
+#include <asm/dom0less-build.h>
+#include <asm/setup.h>
+
+bool __init is_dom0less_mode(void)
+{
+ struct bootmodules *mods = &bootinfo.modules;
+ struct bootmodule *mod;
+ unsigned int i;
+ bool dom0found = false;
+ bool domUfound = false;
+
+ /* Look into the bootmodules */
+ for ( i = 0 ; i < mods->nr_mods ; i++ )
+ {
+ mod = &mods->module[i];
+ /* Find if dom0 and domU kernels are present */
+ if ( mod->kind == BOOTMOD_KERNEL )
+ {
+ if ( mod->domU == false )
+ {
+ dom0found = true;
+ break;
+ }
+ else
+ domUfound = true;
+ }
+ }
+
+ /*
+ * If there is no dom0 kernel but at least one domU, then we are in
+ * dom0less mode
+ */
+ return ( !dom0found && domUfound );
+}
+
+void __init create_domUs(void)
+{
+ struct dt_device_node *node;
+ const char *dom0less_iommu;
+ bool iommu = false;
+ const struct dt_device_node *cpupool_node,
+ *chosen = dt_find_node_by_path("/chosen");
+ const char *llc_colors_str = NULL;
+
+ BUG_ON(chosen == NULL);
+ dt_for_each_child_node(chosen, node)
+ {
+ struct domain *d;
+ struct xen_domctl_createdomain d_cfg = arch_xen_domctl_createdomain();
+ unsigned int flags = 0U;
+ uint32_t val;
+ int rc;
+
+ if ( !dt_device_is_compatible(node, "xen,domain") )
+ continue;
+
+ if ( (max_init_domid + 1) >= DOMID_FIRST_RESERVED )
+ panic("No more domain IDs available\n");
+
+ if ( dt_find_property(node, "xen,static-mem", NULL) )
+ {
+ if ( llc_coloring_enabled )
+ panic("LLC coloring and static memory are incompatible\n");
+
+ flags |= CDF_staticmem;
+ }
+
+ if ( dt_property_read_bool(node, "direct-map") )
+ {
+ if ( !(flags & CDF_staticmem) )
+ panic("direct-map is not valid for domain %s without static
allocation.\n",
+ dt_node_name(node));
+
+ flags |= CDF_directmap;
+ }
+
+ if ( !dt_property_read_u32(node, "cpus", &d_cfg.max_vcpus) )
+ panic("Missing property 'cpus' for domain %s\n",
+ dt_node_name(node));
+
+ if ( !dt_property_read_string(node, "passthrough", &dom0less_iommu) &&
+ !strcmp(dom0less_iommu, "enabled") )
+ iommu = true;
+
+ if ( iommu_enabled &&
+ (iommu || dt_find_compatible_node(node, NULL,
+ "multiboot,device-tree")) )
+ d_cfg.flags |= XEN_DOMCTL_CDF_iommu;
+
+ /* Get the optional property domain-cpupool */
+ cpupool_node = dt_parse_phandle(node, "domain-cpupool", 0);
+ if ( cpupool_node )
+ {
+ int pool_id = btcpupools_get_domain_pool_id(cpupool_node);
+ if ( pool_id < 0 )
+ panic("Error getting cpupool id from domain-cpupool (%d)\n",
+ pool_id);
+ d_cfg.cpupool_id = pool_id;
+ }
+
+ if ( dt_property_read_u32(node, "max_grant_version", &val) )
+ d_cfg.grant_opts = XEN_DOMCTL_GRANT_version(val);
+
+ if ( dt_property_read_u32(node, "max_grant_frames", &val) )
+ {
+ if ( val > INT32_MAX )
+ panic("max_grant_frames (%"PRIu32") overflow\n", val);
+ d_cfg.max_grant_frames = val;
+ }
+
+ if ( dt_property_read_u32(node, "max_maptrack_frames", &val) )
+ {
+ if ( val > INT32_MAX )
+ panic("max_maptrack_frames (%"PRIu32") overflow\n", val);
+ d_cfg.max_maptrack_frames = val;
+ }
+
+ dt_property_read_string(node, "llc-colors", &llc_colors_str);
+ if ( !llc_coloring_enabled && llc_colors_str )
+ panic("'llc-colors' found, but LLC coloring is disabled\n");
+
+ arch_create_domus(node, &d_cfg, flags);
+
+ /*
+ * The variable max_init_domid is initialized with zero, so here it's
+ * very important to use the pre-increment operator to call
+ * domain_create() with a domid > 0. (domid == 0 is reserved for Dom0)
+ */
+ d = domain_create(++max_init_domid, &d_cfg, flags);
+ if ( IS_ERR(d) )
+ panic("Error creating domain %s (rc = %ld)\n",
+ dt_node_name(node), PTR_ERR(d));
+
+ if ( llc_coloring_enabled &&
+ (rc = domain_set_llc_colors_from_str(d, llc_colors_str)) )
+ panic("Error initializing LLC coloring for domain %s (rc = %d)\n",
+ dt_node_name(node), rc);
+
+ d->is_console = true;
+ dt_device_set_used_by(node, d->domain_id);
+
+ rc = construct_domU(d, node);
+ if ( rc )
+ panic("Could not set up domain %s (rc = %d)\n",
+ dt_node_name(node), rc);
+ }
+}
diff --git a/xen/include/asm-generic/dom0less-build.h
b/xen/include/asm-generic/dom0less-build.h
new file mode 100644
index 0000000000..a6985bc20a
--- /dev/null
+++ b/xen/include/asm-generic/dom0less-build.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __ASM_GENERIC_DOM0LESS_BUILD_H__
+#define __ASM_GENERIC_DOM0LESS_BUILD_H__
+
+#include <xen/stdbool.h>
+
+#ifdef CONFIG_DOM0LESS_BOOT
+
+#include <public/domctl.h>
+
+void create_domUs(void);
+bool is_dom0less_mode(void);
+
+int construct_domU(struct domain *d, const struct dt_device_node *node);
+
+struct xen_domctl_createdomain arch_xen_domctl_createdomain(void);
+void arch_create_domus(struct dt_device_node *node,
+ struct xen_domctl_createdomain *d_cfg,
+ unsigned int flags);
+
+#else /* !CONFIG_DOM0LESS_BOOT */
+
+static inline void create_domUs(void) {}
+static inline bool is_dom0less_mode(void)
+{
+ return false;
+}
+
+#endif /* CONFIG_DOM0LESS_BOOT */
+
+#endif /* __ASM_GENERIC_DOM0LESS_BUILD_H__ */
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
--
2.47.1
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |