[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v7] mm/memblock: Add memblock_alloc_or_panic interface



On Sun, Dec 22, 2024 at 07:15:37PM +0800, Guo Weikang wrote:

Hi Guo,

> Before SLUB initialization, various subsystems used memblock_alloc to
> allocate memory. In most cases, when memory allocation fails, an immediate
> panic is required. To simplify this behavior and reduce repetitive checks,
> introduce `memblock_alloc_or_panic`. This function ensures that memory
> allocation failures result in a panic automatically, improving code
> readability and consistency across subsystems that require this behavior.

I believe, you also want to make similar function against memblock_alloc_low().

Please, find s390 comments below.

...

> diff --git a/arch/s390/kernel/numa.c b/arch/s390/kernel/numa.c
> index ddc1448ea2e1..a33e20f73330 100644
> --- a/arch/s390/kernel/numa.c
> +++ b/arch/s390/kernel/numa.c
> @@ -22,10 +22,7 @@ void __init numa_setup(void)
>       node_set(0, node_possible_map);
>       node_set_online(0);
>       for (nid = 0; nid < MAX_NUMNODES; nid++) {
> -             NODE_DATA(nid) = memblock_alloc(sizeof(pg_data_t), 8);
> -             if (!NODE_DATA(nid))
> -                     panic("%s: Failed to allocate %zu bytes align=0x%x\n",
> -                           __func__, sizeof(pg_data_t), 8);
> +             NODE_DATA(nid) = memblock_alloc_or_panic(sizeof(pg_data_t), 8);
>       }

Please, also remove the cycle body brackets.

>       NODE_DATA(0)->node_spanned_pages = memblock_end_of_DRAM() >> PAGE_SHIFT;
>       NODE_DATA(0)->node_id = 0;
> diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
> index 0ce550faf073..1298f0860733 100644
> --- a/arch/s390/kernel/setup.c
> +++ b/arch/s390/kernel/setup.c
> @@ -376,11 +376,7 @@ static unsigned long __init stack_alloc_early(void)
>  {
>       unsigned long stack;
>  
> -     stack = (unsigned long)memblock_alloc(THREAD_SIZE, THREAD_SIZE);
> -     if (!stack) {
> -             panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
> -                   __func__, THREAD_SIZE, THREAD_SIZE);
> -     }
> +     stack = (unsigned long)memblock_alloc_or_panic(THREAD_SIZE, 
> THREAD_SIZE);
>       return stack;
>  }
>  
> @@ -504,10 +500,7 @@ static void __init setup_resources(void)
>       bss_resource.end = __pa_symbol(__bss_stop) - 1;
>  
>       for_each_mem_range(i, &start, &end) {
> -             res = memblock_alloc(sizeof(*res), 8);
> -             if (!res)
> -                     panic("%s: Failed to allocate %zu bytes align=0x%x\n",
> -                           __func__, sizeof(*res), 8);
> +             res = memblock_alloc_or_panic(sizeof(*res), 8);
>               res->flags = IORESOURCE_BUSY | IORESOURCE_SYSTEM_RAM;
>  
>               res->name = "System RAM";
> @@ -526,10 +519,7 @@ static void __init setup_resources(void)
>                           std_res->start > res->end)
>                               continue;
>                       if (std_res->end > res->end) {
> -                             sub_res = memblock_alloc(sizeof(*sub_res), 8);
> -                             if (!sub_res)
> -                                     panic("%s: Failed to allocate %zu bytes 
> align=0x%x\n",
> -                                           __func__, sizeof(*sub_res), 8);
> +                             sub_res = 
> memblock_alloc_or_panic(sizeof(*sub_res), 8);
>                               *sub_res = *std_res;
>                               sub_res->end = res->end;
>                               std_res->start = res->end + 1;
> @@ -816,9 +806,7 @@ static void __init setup_randomness(void)
>  {
>       struct sysinfo_3_2_2 *vmms;
>  
> -     vmms = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
> -     if (!vmms)
> -             panic("Failed to allocate memory for sysinfo structure\n");
> +     vmms = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
>       if (stsi(vmms, 3, 2, 2) == 0 && vmms->count)
>               add_device_randomness(&vmms->vm, sizeof(vmms->vm[0]) * 
> vmms->count);
>       memblock_free(vmms, PAGE_SIZE);
> diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
> index 822d8e6f8717..d77aaefb59bd 100644
> --- a/arch/s390/kernel/smp.c
> +++ b/arch/s390/kernel/smp.c
> @@ -611,9 +611,9 @@ void __init smp_save_dump_ipl_cpu(void)
>       if (!dump_available())
>               return;
>       sa = save_area_alloc(true);
> -     regs = memblock_alloc(512, 8);
> -     if (!sa || !regs)
> +     if (!sa)
>               panic("could not allocate memory for boot CPU save area\n");

Please, replace memblock_alloc() with memblock_alloc_or_panic() in
save_area_alloc() and remove the error handling here and also in
smp_save_dump_secondary_cpus().

> +     regs = memblock_alloc_or_panic(512, 8);
>       copy_oldmem_kernel(regs, __LC_FPREGS_SAVE_AREA, 512);
>       save_area_add_regs(sa, regs);
>       memblock_free(regs, 512);
> @@ -792,10 +792,7 @@ void __init smp_detect_cpus(void)
>       u16 address;
>  
>       /* Get CPU information */
> -     info = memblock_alloc(sizeof(*info), 8);
> -     if (!info)
> -             panic("%s: Failed to allocate %zu bytes align=0x%x\n",
> -                   __func__, sizeof(*info), 8);
> +     info = memblock_alloc_or_panic(sizeof(*info), 8);
>       smp_get_core_info(info, 1);
>       /* Find boot CPU type */
>       if (sclp.has_core_type) {
> diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
> index 0fd56a1cadbd..cf5ee6032c0b 100644
> --- a/arch/s390/kernel/topology.c
> +++ b/arch/s390/kernel/topology.c
> @@ -548,10 +548,7 @@ static void __init alloc_masks(struct sysinfo_15_1_x 
> *info,
>               nr_masks *= info->mag[TOPOLOGY_NR_MAG - offset - 1 - i];
>       nr_masks = max(nr_masks, 1);
>       for (i = 0; i < nr_masks; i++) {
> -             mask->next = memblock_alloc(sizeof(*mask->next), 8);
> -             if (!mask->next)
> -                     panic("%s: Failed to allocate %zu bytes align=0x%x\n",
> -                           __func__, sizeof(*mask->next), 8);
> +             mask->next = memblock_alloc_or_panic(sizeof(*mask->next), 8);
>               mask = mask->next;
>       }
>  }
> @@ -569,10 +566,7 @@ void __init topology_init_early(void)
>       }
>       if (!MACHINE_HAS_TOPOLOGY)
>               goto out;
> -     tl_info = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
> -     if (!tl_info)
> -             panic("%s: Failed to allocate %lu bytes align=0x%lx\n",
> -                   __func__, PAGE_SIZE, PAGE_SIZE);
> +     tl_info = memblock_alloc_or_panic(PAGE_SIZE, PAGE_SIZE);
>       info = tl_info;
>       store_topology(info);
>       pr_info("The CPU configuration topology of the machine is: %d %d %d %d 
> %d %d / %d\n",

Thanks!



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.