[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH] xen/Kconfig: Drop the final remnants of ---help---



On Thu, 2024-05-02 at 19:10 +0100, Andrew Cooper wrote:
> We deprecated the use of ---help--- a while ago, but a lot of new
> content
> copy&pastes bad examples.  Convert the remaining instances, and
> update
> Kconfig's parser to no longer recongise it.
> 
> This now causes builds to fail with:
> 
>   Kconfig.debug:8: syntax error
>   Kconfig.debug:7: unknown statement "---help---"
> 
> which short circuits one common piece of churn in new content.
> 
> No functional change.
> 
> Signed-off-by: Andrew Cooper <andrew.cooper3@xxxxxxxxxx>
> ---
> CC: George Dunlap <George.Dunlap@xxxxxxxxxx>
> CC: Jan Beulich <JBeulich@xxxxxxxx>
> CC: Stefano Stabellini <sstabellini@xxxxxxxxxx>
> CC: Julien Grall <julien@xxxxxxx>
> CC: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
> 
> For 4.19.  This cleans up a legacy we've been wanting to get rid of
> for a
> while, and will be least disruptive on people if it gets in ahead of
> most
> people starting work for 4.20.
I am okay with commiting the patch during 4.19 release:
 Release-acked-by: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
> ---
>  xen/Kconfig                     |  2 +-
>  xen/Kconfig.debug               | 28 +++++++++----------
>  xen/arch/arm/Kconfig            |  8 +++---
>  xen/arch/arm/platforms/Kconfig  | 12 ++++-----
>  xen/arch/x86/Kconfig            | 32 +++++++++++-----------
>  xen/common/Kconfig              | 48 ++++++++++++++++---------------
> --
>  xen/common/sched/Kconfig        | 10 +++----
>  xen/drivers/passthrough/Kconfig |  8 +++---
>  xen/drivers/video/Kconfig       |  2 +-
>  xen/tools/kconfig/lexer.l       |  2 +-
>  10 files changed, 76 insertions(+), 76 deletions(-)
> 
> diff --git a/xen/Kconfig b/xen/Kconfig
> index 1e1b041fd52f..e459cdac0cd7 100644
> --- a/xen/Kconfig
> +++ b/xen/Kconfig
> @@ -84,7 +84,7 @@ config UNSUPPORTED
>  config LTO
>       bool "Link Time Optimisation"
>       depends on BROKEN
> -     ---help---
> +     help
>         Enable Link Time Optimisation.
>  
>         If unsure, say N.
> diff --git a/xen/Kconfig.debug b/xen/Kconfig.debug
> index fa81853e9385..61b24ac552cd 100644
> --- a/xen/Kconfig.debug
> +++ b/xen/Kconfig.debug
> @@ -4,7 +4,7 @@ menu "Debugging Options"
>  config DEBUG
>       bool "Developer Checks"
>       default y
> -     ---help---
> +     help
>         If you say Y here this will enable developer checks such
> as asserts
>         and extra printks. This option is intended for development
> purposes
>         only, and not for production use.
> @@ -17,14 +17,14 @@ config GDBSX
>       bool "Guest debugging with gdbsx"
>       depends on X86
>       default y
> -     ---help---
> +     help
>         If you want to enable support for debugging guests from
> dom0 via
>         gdbsx then say Y.
>  
>  config FRAME_POINTER
>       bool "Compile Xen with frame pointers"
>       default DEBUG
> -     ---help---
> +     help
>         If you say Y here the resulting Xen will be slightly
> larger and
>         maybe slower, but it gives very useful debugging
> information
>         in case of any Xen bugs.
> @@ -33,7 +33,7 @@ config COVERAGE
>       bool "Code coverage support"
>       depends on !LIVEPATCH
>       select SUPPRESS_DUPLICATE_SYMBOL_WARNINGS if
> !ENFORCE_UNIQUE_SYMBOLS
> -     ---help---
> +     help
>         Enable code coverage support.
>  
>         If unsure, say N here.
> @@ -41,7 +41,7 @@ config COVERAGE
>  config DEBUG_LOCK_PROFILE
>       bool "Lock Profiling"
>       select DEBUG_LOCKS
> -     ---help---
> +     help
>         Lock profiling allows you to see how often locks are taken
> and blocked.
>         You can use serial console to print (and reset) using 'l'
> and 'L'
>         respectively, or the 'xenlockprof' tool.
> @@ -49,13 +49,13 @@ config DEBUG_LOCK_PROFILE
>  config DEBUG_LOCKS
>       bool "Lock debugging"
>       default DEBUG
> -     ---help---
> +     help
>         Enable debugging features of lock handling.  Some
> additional
>         checks will be performed when acquiring and releasing
> locks.
>  
>  config PERF_COUNTERS
>       bool "Performance Counters"
> -     ---help---
> +     help
>         Enables software performance counters that allows you to
> analyze
>         bottlenecks in the system.  To access this data you can
> use serial
>         console to print (and reset) using 'p' and 'P'
> respectively, or
> @@ -64,21 +64,21 @@ config PERF_COUNTERS
>  config PERF_ARRAYS
>       bool "Performance Counter Array Histograms"
>       depends on PERF_COUNTERS
> -     ---help---
> +     help
>         Enables software performance counter array histograms.
>  
>  
>  config VERBOSE_DEBUG
>       bool "Verbose debug messages"
>       default DEBUG
> -     ---help---
> +     help
>         Guest output from HYPERVISOR_console_io and hypervisor
> parsing
>         ELF images (dom0) will be logged in the Xen ring buffer.
>  
>  config DEVICE_TREE_DEBUG
>       bool "Device tree debug messages"
>       depends on HAS_DEVICE_TREE
> -     ---help---
> +     help
>         Device tree parsing and DOM0 device tree building messages
> are
>         logged in the Xen ring buffer.
>         If unsure, say N here.
> @@ -86,14 +86,14 @@ config DEVICE_TREE_DEBUG
>  config SCRUB_DEBUG
>       bool "Page scrubbing test"
>       default DEBUG
> -     ---help---
> +     help
>         Verify that pages that need to be scrubbed before being
> allocated to
>         a guest are indeed scrubbed.
>  
>  config UBSAN
>       bool "Undefined behaviour sanitizer"
>       depends on HAS_UBSAN
> -     ---help---
> +     help
>         Enable undefined behaviour sanitizer. It uses compiler to
> insert code
>         snippets so that undefined behaviours in C are detected
> during runtime.
>         This requires a UBSAN capable compiler and it is a debug
> only feature.
> @@ -109,7 +109,7 @@ config UBSAN_FATAL
>  
>  config DEBUG_TRACE
>       bool "Debug trace support"
> -     ---help---
> +     help
>         Debug trace enables to record debug trace messages which
> are printed
>         either directly to the console or are printed to console
> in case of
>         a system crash.
> @@ -117,7 +117,7 @@ config DEBUG_TRACE
>  config XMEM_POOL_POISON
>       bool "Poison free xenpool blocks"
>       default DEBUG
> -     ---help---
> +     help
>         Poison free blocks with 0xAA bytes and verify them when a
> block is
>         allocated in order to spot use-after-free issues.
>  
> diff --git a/xen/arch/arm/Kconfig b/xen/arch/arm/Kconfig
> index f8139a773a43..21d03d9f4424 100644
> --- a/xen/arch/arm/Kconfig
> +++ b/xen/arch/arm/Kconfig
> @@ -67,7 +67,7 @@ source "arch/Kconfig"
>  config ACPI
>       bool "ACPI (Advanced Configuration and Power Interface)
> Support (UNSUPPORTED)" if UNSUPPORTED
>       depends on ARM_64 && ARM_EFI
> -     ---help---
> +     help
>  
>         Advanced Configuration and Power Interface (ACPI) support
> for Xen is
>         an alternative to device tree on ARM64. This requires
> UEFI.
> @@ -102,7 +102,7 @@ config GICV3
>       depends on !NEW_VGIC
>       default n if ARM_32
>       default y if ARM_64
> -     ---help---
> +     help
>  
>         Driver for the ARM Generic Interrupt Controller v3.
>         If unsure, use the default setting.
> @@ -132,7 +132,7 @@ config HVM
>  config NEW_VGIC
>       bool "Use new VGIC implementation"
>       select GICV2
> -     ---help---
> +     help
>  
>       This is an alternative implementation of the ARM GIC
> interrupt
>       controller emulation, based on the Linux/KVM VGIC. It has a
> better
> @@ -147,7 +147,7 @@ config NEW_VGIC
>  config SBSA_VUART_CONSOLE
>       bool "Emulated SBSA UART console support"
>       default y
> -     ---help---
> +     help
>         Allows a guest to use SBSA Generic UART as a console. The
>         SBSA Generic UART implements a subset of ARM PL011 UART.
>  
> diff --git a/xen/arch/arm/platforms/Kconfig
> b/xen/arch/arm/platforms/Kconfig
> index c93a6b275620..76f7e76b1bf4 100644
> --- a/xen/arch/arm/platforms/Kconfig
> +++ b/xen/arch/arm/platforms/Kconfig
> @@ -1,14 +1,14 @@
>  choice
>       prompt "Platform Support"
>       default ALL_PLAT
> -     ---help---
> +     help
>       Choose which hardware platform to enable in Xen.
>  
>       If unsure, choose ALL_PLAT.
>  
>  config ALL_PLAT
>       bool "All Platforms"
> -     ---help---
> +     help
>       Enable support for all available hardware platforms. It
> doesn't
>       automatically select any of the related drivers.
>  
> @@ -17,7 +17,7 @@ config QEMU
>       depends on ARM_64
>       select GICV3
>       select HAS_PL011
> -     ---help---
> +     help
>       Enable all the required drivers for QEMU aarch64 virt
> emulated
>       machine.
>  
> @@ -26,7 +26,7 @@ config RCAR3
>       depends on ARM_64
>       select HAS_SCIF
>       select IPMMU_VMSA
> -     ---help---
> +     help
>       Enable all the required drivers for Renesas RCar3
>  
>  config MPSOC
> @@ -34,12 +34,12 @@ config MPSOC
>       depends on ARM_64
>       select HAS_CADENCE_UART
>       select ARM_SMMU
> -     ---help---
> +     help
>       Enable all the required drivers for Xilinx Ultrascale+ MPSoC
>  
>  config NO_PLAT
>       bool "No Platforms"
> -     ---help---
> +     help
>       Do not enable specific support for any platform.
>  
>  endchoice
> diff --git a/xen/arch/x86/Kconfig b/xen/arch/x86/Kconfig
> index 2b6248774d8f..7e03e4bc5546 100644
> --- a/xen/arch/x86/Kconfig
> +++ b/xen/arch/x86/Kconfig
> @@ -58,7 +58,7 @@ source "arch/Kconfig"
>  config PV
>       def_bool y
>       prompt "PV support"
> -     ---help---
> +     help
>         Interfaces to support PV domains. These require guest
> kernel support
>         to run as a PV guest, but don't require any specific
> hardware support.
>  
> @@ -71,7 +71,7 @@ config PV32
>       depends on PV
>       default PV_SHIM
>       select COMPAT
> -     ---help---
> +     help
>         The 32bit PV ABI uses Ring1, an area of the x86
> architecture which
>         was deprecated and mostly removed in the AMD64 spec.  As a
> result,
>         it occasionally conflicts with newer x86 hardware
> features, causing
> @@ -90,7 +90,7 @@ config PV_LINEAR_PT
>         bool "Support for PV linear pagetables"
>         depends on PV
>         default y
> -       ---help---
> +       help
>           Linear pagetables (also called "recursive pagetables")
> refers
>           to the practice of a guest operating system having
> pagetable
>           entries pointing to other pagetables of the same level
> (i.e.,
> @@ -113,7 +113,7 @@ config HVM
>       select COMPAT
>       select IOREQ_SERVER
>       select MEM_ACCESS_ALWAYS_ON
> -     ---help---
> +     help
>         Interfaces to support HVM domains.  HVM domains require
> hardware
>         virtualisation extensions (e.g. Intel VT-x, AMD SVM), but
> can boot
>         guests which have no specific Xen knowledge.
> @@ -126,7 +126,7 @@ config XEN_SHSTK
>       bool "Supervisor Shadow Stacks"
>       depends on HAS_AS_CET_SS
>       default y
> -     ---help---
> +     help
>         Control-flow Enforcement Technology (CET) is a set of
> features in
>         hardware designed to combat Return-oriented Programming
> (ROP, also
>         call/jump COP/JOP) attacks.  Shadow Stacks are one CET
> feature
> @@ -152,7 +152,7 @@ config SHADOW_PAGING
>       bool "Shadow Paging"
>       default !PV_SHIM_EXCLUSIVE
>       depends on PV || HVM
> -     ---help---
> +     help
>  
>            Shadow paging is a software alternative to hardware paging
> support
>            (Intel EPT, AMD NPT).
> @@ -171,7 +171,7 @@ config SHADOW_PAGING
>  config BIGMEM
>       bool "big memory support"
>       default n
> -     ---help---
> +     help
>         Allows Xen to support up to 123Tb of memory.
>  
>         This requires enlarging struct page_info as well as
> shrinking
> @@ -183,7 +183,7 @@ config HVM_FEP
>       bool "HVM Forced Emulation Prefix support (UNSUPPORTED)" if
> UNSUPPORTED
>       default DEBUG
>       depends on HVM
> -     ---help---
> +     help
>  
>         Compiles in a feature that allows HVM guest to arbitrarily
>         exercise the instruction emulator.
> @@ -203,7 +203,7 @@ config TBOOT
>       depends on UNSUPPORTED
>       default !PV_SHIM_EXCLUSIVE
>       select CRYPTO
> -     ---help---
> +     help
>         Allows support for Trusted Boot using the Intel(R) Trusted
> Execution
>         Technology (TXT)
>  
> @@ -213,14 +213,14 @@ choice
>       prompt "Alignment of Xen image"
>       default XEN_ALIGN_2M if PV_SHIM_EXCLUSIVE
>       default XEN_ALIGN_DEFAULT
> -     ---help---
> +     help
>         Specify alignment for Xen image.
>  
>         If unsure, choose "default".
>  
>  config XEN_ALIGN_DEFAULT
>       bool "Default alignment"
> -     ---help---
> +     help
>         Pick alignment according to build variants.
>  
>         For EFI build the default alignment is 2M. For ELF build
> @@ -281,7 +281,7 @@ config GUEST
>  config XEN_GUEST
>       bool "Xen Guest"
>       select GUEST
> -     ---help---
> +     help
>         Support for Xen detecting when it is running under Xen.
>  
>         If unsure, say N.
> @@ -290,7 +290,7 @@ config PVH_GUEST
>       def_bool y
>       prompt "PVH Guest"
>       depends on XEN_GUEST
> -     ---help---
> +     help
>         Support booting using the PVH ABI.
>  
>         If unsure, say Y.
> @@ -299,7 +299,7 @@ config PV_SHIM
>       def_bool y
>       prompt "PV Shim"
>       depends on PV && XEN_GUEST
> -     ---help---
> +     help
>         Build Xen with a mode which acts as a shim to allow PV
> guest to run
>         in an HVM/PVH container. This mode can only be enabled
> with command
>         line option.
> @@ -309,7 +309,7 @@ config PV_SHIM
>  config PV_SHIM_EXCLUSIVE
>       bool "PV Shim Exclusive"
>       depends on PV_SHIM
> -     ---help---
> +     help
>         Build Xen in a way which unconditionally assumes PV_SHIM
> mode.  This
>         option is only intended for use when building a dedicated
> PV Shim
>         firmware, and will not function correctly in other
> scenarios.
> @@ -321,7 +321,7 @@ if !PV_SHIM_EXCLUSIVE
>  config HYPERV_GUEST
>       bool "Hyper-V Guest"
>       select GUEST
> -     ---help---
> +     help
>         Support for Xen detecting when it is running under Hyper-
> V.
>  
>         If unsure, say N.
> diff --git a/xen/common/Kconfig b/xen/common/Kconfig
> index cff3166ff923..565ceda741b9 100644
> --- a/xen/common/Kconfig
> +++ b/xen/common/Kconfig
> @@ -15,7 +15,7 @@ config CORE_PARKING
>  config GRANT_TABLE
>       bool "Grant table support" if EXPERT
>       default y
> -     ---help---
> +     help
>         Grant table provides a generic mechanism to memory sharing
>         between domains. This shared memory interface underpins
> the
>         split device drivers for block and network IO in a classic
> @@ -90,7 +90,7 @@ config MEM_ACCESS
>       def_bool MEM_ACCESS_ALWAYS_ON
>       prompt "Memory Access and VM events" if
> !MEM_ACCESS_ALWAYS_ON
>       depends on HVM
> -     ---help---
> +     help
>  
>         Framework to configure memory access types for guests and
> receive
>         related events in userspace.
> @@ -133,7 +133,7 @@ config INDIRECT_THUNK
>  config SPECULATIVE_HARDEN_ARRAY
>       bool "Speculative Array Hardening"
>       default y
> -     ---help---
> +     help
>         Contemporary processors may use speculative execution as a
>         performance optimisation, but this can potentially be
> abused by an
>         attacker to leak data via speculative sidechannels.
> @@ -154,7 +154,7 @@ config SPECULATIVE_HARDEN_BRANCH
>       bool "Speculative Branch Hardening"
>       default y
>       depends on X86
> -        ---help---
> +        help
>         Contemporary processors may use speculative execution as a
>         performance optimisation, but this can potentially be
> abused by an
>         attacker to leak data via speculative sidechannels.
> @@ -228,7 +228,7 @@ config DIT_DEFAULT
>  config HYPFS
>       bool "Hypervisor file system support"
>       default y
> -     ---help---
> +     help
>         Support Xen hypervisor file system. This file system is
> used to
>         present various hypervisor internal data to dom0 and in
> some
>         cases to allow modifying settings. Disabling the support
> will
> @@ -241,7 +241,7 @@ config HYPFS_CONFIG
>       bool "Provide hypervisor .config via hypfs entry"
>       default y
>       depends on HYPFS
> -     ---help---
> +     help
>         When enabled the contents of the .config file used to
> build the
>         hypervisor are provided via the hypfs entry
> /buildinfo/config.
>  
> @@ -252,7 +252,7 @@ config IOREQ_SERVER
>       bool "IOREQ support (EXPERT)" if EXPERT && !X86
>       default X86
>       depends on HVM
> -     ---help---
> +     help
>         Enables generic mechanism for providing emulated devices
> to the guests.
>  
>         If unsure, say N.
> @@ -261,7 +261,7 @@ config KEXEC
>       bool "kexec support"
>       default y
>       depends on HAS_KEXEC
> -     ---help---
> +     help
>         Allows a running Xen hypervisor to be replaced with
> another OS
>         without rebooting. This is primarily used to execute a
> crash
>         environment to collect information on a Xen hypervisor or
> dom0 crash.
> @@ -270,7 +270,7 @@ config KEXEC
>  
>  config EFI_SET_VIRTUAL_ADDRESS_MAP
>      bool "EFI: call SetVirtualAddressMap()" if EXPERT
> -    ---help---
> +    help
>        Call EFI SetVirtualAddressMap() runtime service to setup
> memory map for
>        further runtime services. According to UEFI spec, it isn't
> strictly
>        necessary, but many UEFI implementations misbehave when this
> call is
> @@ -292,7 +292,7 @@ config XENOPROF
>  config XSM
>       bool "Xen Security Modules support"
>       default ARM
> -     ---help---
> +     help
>         Enables the security framework known as Xen Security
> Modules which
>         allows administrators fine-grained control over a Xen
> domain and
>         its capabilities by defining permissible interactions
> between domains,
> @@ -305,7 +305,7 @@ config XSM_FLASK
>       def_bool y
>       prompt "FLux Advanced Security Kernel support"
>       depends on XSM
> -     ---help---
> +     help
>         Enables FLASK (FLux Advanced Security Kernel) as the
> access control
>         mechanism used by the XSM framework.  This provides a
> mandatory access
>         control framework by which security enforcement,
> isolation, and
> @@ -318,7 +318,7 @@ config XSM_FLASK_AVC_STATS
>       def_bool y
>       prompt "Maintain statistics on the FLASK access vector
> cache" if EXPERT
>       depends on XSM_FLASK
> -     ---help---
> +     help
>         Maintain counters on the access vector cache that can be
> viewed using
>         the FLASK_AVC_CACHESTATS sub-op of the xsm_op hypercall. 
> Disabling
>         this will save a tiny amount of memory and time to update
> the stats.
> @@ -329,7 +329,7 @@ config XSM_FLASK_POLICY
>       bool "Compile Xen with a built-in FLASK security policy"
>       default y if "$(XEN_HAS_CHECKPOLICY)" = "y"
>       depends on XSM_FLASK
> -     ---help---
> +     help
>         This includes a default XSM policy in the hypervisor so
> that the
>         bootloader does not need to load a policy to get sane
> behavior from an
>         XSM-enabled hypervisor.  If this is disabled, a policy
> must be
> @@ -345,7 +345,7 @@ config XSM_SILO
>       def_bool y
>       prompt "SILO support"
>       depends on XSM
> -     ---help---
> +     help
>         Enables SILO as the access control mechanism used by the
> XSM framework.
>         This is not the default module, add boot parameter
> xsm=silo to choose
>         it. This will deny any unmediated communication channels
> (grant tables
> @@ -372,7 +372,7 @@ config LATE_HWDOM
>       bool "Dedicated hardware domain"
>       default n
>       depends on XSM && X86
> -     ---help---
> +     help
>         Allows the creation of a dedicated hardware domain
> distinct from
>         domain 0 that manages devices without needing access to
> other
>         privileged functionality such as the ability to manage
> domains.
> @@ -390,7 +390,7 @@ config LATE_HWDOM
>  
>  config ARGO
>       bool "Argo: hypervisor-mediated interdomain communication
> (UNSUPPORTED)" if UNSUPPORTED
> -     ---help---
> +     help
>         Enables a hypercall for domains to ask the hypervisor to
> perform
>         data transfer of messages between domains.
>  
> @@ -417,7 +417,7 @@ config LIVEPATCH
>       default X86
>       depends on "$(XEN_HAS_BUILD_ID)" = "y"
>       select CC_SPLIT_SECTIONS
> -     ---help---
> +     help
>         Allows a running Xen hypervisor to be dynamically patched
> using
>         binary patches without rebooting. This is primarily used
> to binarily
>         patch in the field an hypervisor with XSA fixes.
> @@ -428,7 +428,7 @@ config FAST_SYMBOL_LOOKUP
>       bool "Fast symbol lookup (bigger binary)"
>       default y
>       depends on LIVEPATCH
> -     ---help---
> +     help
>         When searching for symbol addresses we can use the built-
> in system
>         that is optimized for searching symbols using addresses as
> the key.
>         However using it for the inverse (find address using the
> symbol name)
> @@ -440,7 +440,7 @@ config FAST_SYMBOL_LOOKUP
>  config ENFORCE_UNIQUE_SYMBOLS
>       bool "Enforce unique symbols"
>       default LIVEPATCH
> -     ---help---
> +     help
>         Multiple symbols with the same name aren't generally a
> problem
>         unless livepatching is to be used.
>  
> @@ -454,7 +454,7 @@ config ENFORCE_UNIQUE_SYMBOLS
>  config SUPPRESS_DUPLICATE_SYMBOL_WARNINGS
>       bool "Suppress duplicate symbol warnings"
>       depends on !ENFORCE_UNIQUE_SYMBOLS
> -     ---help---
> +     help
>         Multiple symbols with the same name aren't generally a
> problem
>         unless Live patching is to be used, so these warnings can
> be
>         suppressed by enabling this option.  Certain other options
> (known
> @@ -464,7 +464,7 @@ config SUPPRESS_DUPLICATE_SYMBOL_WARNINGS
>  config CMDLINE
>       string "Built-in hypervisor command string" if EXPERT
>       default ""
> -     ---help---
> +     help
>         Enter arguments here that should be compiled into the
> hypervisor
>         image and used at boot time. When the system boots, this
> string
>         will be parsed prior to the bootloader command line. So if
> a
> @@ -475,7 +475,7 @@ config CMDLINE_OVERRIDE
>       bool "Built-in command line overrides bootloader arguments"
>       default n
>       depends on CMDLINE != ""
> -     ---help---
> +     help
>         Set this option to 'Y' to have the hypervisor ignore the
> bootloader
>         command line, and use ONLY the built-in command line.
>  
> @@ -485,7 +485,7 @@ config CMDLINE_OVERRIDE
>  config DOM0_MEM
>       string "Default value for dom0_mem boot parameter"
>       default ""
> -     ---help---
> +     help
>         Sets a default value for dom0_mem, e.g. "512M".
>         The specified string will be used for the dom0_mem
> parameter in
>         case it was not specified on the command line.
> @@ -507,7 +507,7 @@ config DTB_FILE
>  config TRACEBUFFER
>       bool "Enable tracing infrastructure" if EXPERT
>       default y
> -     ---help---
> +     help
>         Enable tracing infrastructure and pre-defined tracepoints
> within Xen.
>         This will allow live information about Xen's execution and
> performance
>         to be collected at run time for debugging or performance
> analysis.
> diff --git a/xen/common/sched/Kconfig b/xen/common/sched/Kconfig
> index b2ef0c99a3f8..18ca1ce7ab9f 100644
> --- a/xen/common/sched/Kconfig
> +++ b/xen/common/sched/Kconfig
> @@ -4,20 +4,20 @@ menu "Schedulers"
>  config SCHED_CREDIT
>       bool "Credit scheduler support"
>       default y
> -     ---help---
> +     help
>         The traditional credit scheduler is a general purpose
> scheduler.
>  
>  config SCHED_CREDIT2
>       bool "Credit2 scheduler support"
>       default y
> -     ---help---
> +     help
>         The credit2 scheduler is a general purpose scheduler that
> is
>         optimized for lower latency and higher VM density.
>  
>  config SCHED_RTDS
>       bool "RTDS scheduler support (UNSUPPORTED)" if UNSUPPORTED
>       default DEBUG
> -     ---help---
> +     help
>         The RTDS scheduler is a soft and firm real-time scheduler
> for
>         multicore, targeted for embedded, automotive, graphics and
> gaming
>         in the cloud, and general low-latency workloads.
> @@ -25,14 +25,14 @@ config SCHED_RTDS
>  config SCHED_ARINC653
>       bool "ARINC653 scheduler support (UNSUPPORTED)" if
> UNSUPPORTED
>       default DEBUG
> -     ---help---
> +     help
>         The ARINC653 scheduler is a hard real-time scheduler for
> single
>         cores, targeted for avionics, drones, and medical devices.
>  
>  config SCHED_NULL
>       bool "Null scheduler support (UNSUPPORTED)" if UNSUPPORTED
>       default PV_SHIM || DEBUG
> -     ---help---
> +     help
>         The null scheduler is a static, zero overhead scheduler,
>         for when there always are less vCPUs than pCPUs, typically
>         in embedded or HPC scenarios.
> diff --git a/xen/drivers/passthrough/Kconfig
> b/xen/drivers/passthrough/Kconfig
> index 864fcf3b0cef..78edd805365e 100644
> --- a/xen/drivers/passthrough/Kconfig
> +++ b/xen/drivers/passthrough/Kconfig
> @@ -6,7 +6,7 @@ if ARM
>  config ARM_SMMU
>       bool "ARM SMMUv1 and v2 driver"
>       default y
> -     ---help---
> +     help
>         Support for implementations of the ARM System MMU
> architecture
>         versions 1 and 2.
>  
> @@ -16,7 +16,7 @@ config ARM_SMMU
>  config ARM_SMMU_V3
>       bool "ARM Ltd. System MMU Version 3 (SMMUv3) Support" if
> EXPERT
>       depends on ARM_64 && (!ACPI || BROKEN)
> -     ---help---
> +     help
>        Support for implementations of the ARM System MMU
> architecture
>        version 3. Driver is in experimental stage and should not
> be used in
>        production.
> @@ -27,7 +27,7 @@ config ARM_SMMU_V3
>  config IPMMU_VMSA
>       bool "Renesas IPMMU-VMSA found in R-Car Gen3/Gen4 SoCs"
>       depends on ARM_64
> -     ---help---
> +     help
>         Support for implementations of the Renesas IPMMU-VMSA
> found
>         in R-Car Gen3/Gen4 SoCs.
>  
> @@ -68,7 +68,7 @@ choice
>       prompt "IOMMU device quarantining default behavior"
>       depends on HAS_PCI
>       default IOMMU_QUARANTINE_BASIC
> -     ---help---
> +     help
>         When a PCI device is assigned to an untrusted domain, it
> is possible
>         for that domain to program the device to DMA to an
> arbitrary address.
>         The IOMMU is used to protect the host from malicious DMA
> by making
> diff --git a/xen/drivers/video/Kconfig b/xen/drivers/video/Kconfig
> index 41ca503cc961..245030beeaa2 100644
> --- a/xen/drivers/video/Kconfig
> +++ b/xen/drivers/video/Kconfig
> @@ -7,7 +7,7 @@ config VGA
>       select VIDEO
>       depends on X86
>       default y if !PV_SHIM_EXCLUSIVE
> -     ---help---
> +     help
>         Enable VGA output for the Xen hypervisor.
>  
>         If unsure, say Y.
> diff --git a/xen/tools/kconfig/lexer.l b/xen/tools/kconfig/lexer.l
> index 6354c905b006..4b7339ff4c8b 100644
> --- a/xen/tools/kconfig/lexer.l
> +++ b/xen/tools/kconfig/lexer.l
> @@ -105,7 +105,7 @@ n [A-Za-z0-9_-]
>  "endchoice"          return T_ENDCHOICE;
>  "endif"                      return T_ENDIF;
>  "endmenu"            return T_ENDMENU;
> -"help"|"---help---"  return T_HELP;
> +"help"                       return T_HELP;
>  "hex"                        return T_HEX;
>  "if"                 return T_IF;
>  "imply"                      return T_IMPLY;
> 
> base-commit: feb9158a620040846d76981acbe8ea9e2255a07b




 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.