Re: [BUG]i2c_hid_acpi broken with 4.17.2 on Framework Laptop 13 AMD

[Jan Beulich <jbeulich@xxxxxxxx>]

On 05.12.2023 15:14, Sébastien Chaumat wrote:
>  booting kernel with "dyndbg=file drivers/gpio/* +p"

I'm afraid this doesn't tell me anything. I'm simply not familiar with
Linux'es GPIO handling.

Jan

> [    1.997798] i2c_designware AMDI0010:00: using ACPI '\_SB.I2CA' for
> 'scl' GPIO lookup
> [    1.997804] acpi AMDI0010:00: GPIO: looking up scl-gpios
> [    1.997806] acpi AMDI0010:00: GPIO: looking up scl-gpio
> [    1.997807] i2c_designware AMDI0010:00: using lookup tables for GPIO lookup
> [    1.997809] i2c_designware AMDI0010:00: No GPIO consumer scl found
> [    2.007517] i2c_designware AMDI0010:03: using ACPI '\_SB.I2CD' for
> 'scl' GPIO lookup
> [    2.007521] acpi AMDI0010:03: GPIO: looking up scl-gpios
> [    2.007523] acpi AMDI0010:03: GPIO: looking up scl-gpio
> [    2.007524] i2c_designware AMDI0010:03: using lookup tables for GPIO lookup
> [    2.007526] i2c_designware AMDI0010:03: No GPIO consumer scl found
> [    2.343905] gpiochip_find_base: found new base at 512
> [    2.344408] gpio gpiochip0: Persistence not supported for GPIO 0
> [    2.344436] gpio gpiochip0: Persistence not supported for GPIO 61
> [    2.344458] gpio gpiochip0: Persistence not supported for GPIO 62
> [    2.344480] gpio gpiochip0: Persistence not supported for GPIO 58
> [    2.344502] gpio gpiochip0: Persistence not supported for GPIO 59
> [    2.344523] gpio gpiochip0: Persistence not supported for GPIO 2
> [    2.344546] gpio gpiochip0: Persistence not supported for GPIO 6
> [    2.344571] gpio gpiochip0: Persistence not supported for GPIO 54
> [    2.344646] gpio gpiochip0: (AMDI0030:00): added GPIO chardev (254:0)
> [    2.344648] gpio gpiochip0: registered GPIOs 512 to 767 on AMDI0030:00
> [    2.344650] gpio gpiochip0: (AMDI0030:00): created GPIO range
> 0->255 ==> AMDI0030:00 PIN 0->255
> [    2.357663] acpi MSFT0101:00: GPIO: looking up 0 in _CRS
> [    2.376188] mdio_bus fixed-0: using lookup tables for GPIO lookup
> [    2.376193] mdio_bus fixed-0: No GPIO consumer reset found
> [    2.401459] rtc_cmos 00:01: using ACPI '\_SB.PCI0.LPC0.RTC' for
> 'wp' GPIO lookup
> [    2.401464] acpi PNP0B00:00: GPIO: looking up wp-gpios
> [    2.401465] acpi PNP0B00:00: GPIO: looking up wp-gpio
> [    2.401467] rtc_cmos 00:01: using lookup tables for GPIO lookup
> [    2.401468] rtc_cmos 00:01: No GPIO consumer wp found
> [    2.659765] amd_gpio AMDI0030:00: failed to enable wake-up interrupt
> [    2.660047] amd_gpio AMDI0030:00: failed to enable wake-up interrupt
> [    2.660162] amd_gpio AMDI0030:00: failed to enable wake-up interrupt
> [    2.660277] amd_gpio AMDI0030:00: failed to enable wake-up interrupt
> [    2.660393] amd_gpio AMDI0030:00: failed to enable wake-up interrupt
> [    2.660504] amd_gpio AMDI0030:00: failed to enable wake-up interrupt
> [    2.660609] amd_gpio AMDI0030:00: failed to enable wake-up interrupt
> [    2.660726] amd_gpio AMDI0030:00: failed to enable wake-up interrupt
> [    5.445265] acpi FRMW0004:00: GPIO: looking up 0 in _CRS
> [    5.445396] acpi FRMW0005:00: GPIO: looking up 0 in _CRS
> [    5.448467] acpi PIXA3854:00: GPIO: looking up 0 in _CRS
> [    5.448483] gpio gpiochip0: Persistence not supported for GPIO 84
> [    5.452476] gpio gpiochip0: Persistence not supported for GPIO 5
> [    5.463304] gpio gpiochip0: Persistence not supported for GPIO 8