|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v11 05/17] vpci: add hooks for PCI device assign/de-assign
From: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
When a PCI device gets assigned/de-assigned we need to
initialize/de-initialize vPCI state for the device.
Also, rename vpci_add_handlers() to vpci_assign_device() and
vpci_remove_device() to vpci_deassign_device() to better reflect role
of the functions.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@xxxxxxxx>
---
In v11:
- Call vpci_assign_device() in "deassign_device" if IOMMU call
"reassign_device" was successful.
In v10:
- removed HAS_VPCI_GUEST_SUPPORT checks
- HAS_VPCI_GUEST_SUPPORT config option (in Kconfig) as it is not used
anywhere
In v9:
- removed previous vpci_[de]assign_device function and renamed
existing handlers
- dropped attempts to handle errors in assign_device() function
- do not call vpci_assign_device for dom_io
- use d instead of pdev->domain
- use IS_ENABLED macro
In v8:
- removed vpci_deassign_device
In v6:
- do not pass struct domain to vpci_{assign|deassign}_device as
pdev->domain can be used
- do not leave the device assigned (pdev->domain == new domain) in case
vpci_assign_device fails: try to de-assign and if this also fails, then
crash the domain
In v5:
- do not split code into run_vpci_init
- do not check for is_system_domain in vpci_{de}assign_device
- do not use vpci_remove_device_handlers_locked and re-allocate
pdev->vpci completely
- make vpci_deassign_device void
In v4:
- de-assign vPCI from the previous domain on device assignment
- do not remove handlers in vpci_assign_device as those must not
exist at that point
In v3:
- remove toolstack roll-back description from the commit message
as error are to be handled with proper cleanup in Xen itself
- remove __must_check
- remove redundant rc check while assigning devices
- fix redundant CONFIG_HAS_VPCI check for CONFIG_HAS_VPCI_GUEST_SUPPORT
- use REGISTER_VPCI_INIT machinery to run required steps on device
init/assign: add run_vpci_init helper
In v2:
- define CONFIG_HAS_VPCI_GUEST_SUPPORT so dead code is not compiled
for x86
In v1:
- constify struct pci_dev where possible
- do not open code is_system_domain()
- extended the commit message
---
xen/drivers/passthrough/pci.c | 24 ++++++++++++++++++++----
xen/drivers/vpci/header.c | 2 +-
xen/drivers/vpci/vpci.c | 6 +++---
xen/include/xen/vpci.h | 10 +++++-----
4 files changed, 29 insertions(+), 13 deletions(-)
diff --git a/xen/drivers/passthrough/pci.c b/xen/drivers/passthrough/pci.c
index 182da45acb..a3312fdab2 100644
--- a/xen/drivers/passthrough/pci.c
+++ b/xen/drivers/passthrough/pci.c
@@ -755,7 +755,7 @@ int pci_add_device(u16 seg, u8 bus, u8 devfn,
* For devices not discovered by Xen during boot, add vPCI handlers
* when Dom0 first informs Xen about such devices.
*/
- ret = vpci_add_handlers(pdev);
+ ret = vpci_assign_device(pdev);
if ( ret )
{
list_del(&pdev->domain_list);
@@ -769,7 +769,7 @@ int pci_add_device(u16 seg, u8 bus, u8 devfn,
if ( ret )
{
write_lock(&hardware_domain->pci_lock);
- vpci_remove_device(pdev);
+ vpci_deassign_device(pdev);
list_del(&pdev->domain_list);
write_unlock(&hardware_domain->pci_lock);
pdev->domain = NULL;
@@ -817,7 +817,7 @@ int pci_remove_device(u16 seg, u8 bus, u8 devfn)
list_for_each_entry ( pdev, &pseg->alldevs_list, alldevs_list )
if ( pdev->bus == bus && pdev->devfn == devfn )
{
- vpci_remove_device(pdev);
+ vpci_deassign_device(pdev);
pci_cleanup_msi(pdev);
ret = iommu_remove_device(pdev);
if ( pdev->domain )
@@ -875,6 +875,10 @@ static int deassign_device(struct domain *d, uint16_t seg,
uint8_t bus,
goto out;
}
+ write_lock(&d->pci_lock);
+ vpci_deassign_device(pdev);
+ write_unlock(&d->pci_lock);
+
devfn = pdev->devfn;
ret = iommu_call(hd->platform_ops, reassign_device, d, target, devfn,
pci_to_dev(pdev));
@@ -886,6 +890,10 @@ static int deassign_device(struct domain *d, uint16_t seg,
uint8_t bus,
pdev->fault.count = 0;
+ write_lock(&target->pci_lock);
+ ret = vpci_assign_device(pdev);
+ write_unlock(&target->pci_lock);
+
out:
if ( ret )
printk(XENLOG_G_ERR "%pd: deassign (%pp) failed (%d)\n",
@@ -1146,7 +1154,7 @@ static void __hwdom_init setup_one_hwdom_device(const
struct setup_hwdom *ctxt,
PCI_SLOT(devfn) == PCI_SLOT(pdev->devfn) );
write_lock(&ctxt->d->pci_lock);
- err = vpci_add_handlers(pdev);
+ err = vpci_assign_device(pdev);
write_unlock(&ctxt->d->pci_lock);
if ( err )
printk(XENLOG_ERR "setup of vPCI for d%d failed: %d\n",
@@ -1476,6 +1484,10 @@ static int assign_device(struct domain *d, u16 seg, u8
bus, u8 devfn, u32 flag)
if ( pdev->broken && d != hardware_domain && d != dom_io )
goto done;
+ write_lock(&pdev->domain->pci_lock);
+ vpci_deassign_device(pdev);
+ write_unlock(&pdev->domain->pci_lock);
+
rc = pdev_msix_assign(d, pdev);
if ( rc )
goto done;
@@ -1502,6 +1514,10 @@ static int assign_device(struct domain *d, u16 seg, u8
bus, u8 devfn, u32 flag)
pci_to_dev(pdev), flag);
}
+ write_lock(&d->pci_lock);
+ rc = vpci_assign_device(pdev);
+ write_unlock(&d->pci_lock);
+
done:
if ( rc )
printk(XENLOG_G_WARNING "%pd: assign (%pp) failed (%d)\n",
diff --git a/xen/drivers/vpci/header.c b/xen/drivers/vpci/header.c
index c86d33d0cd..ec6c93eef6 100644
--- a/xen/drivers/vpci/header.c
+++ b/xen/drivers/vpci/header.c
@@ -190,7 +190,7 @@ bool vpci_process_pending(struct vcpu *v)
* killed in order to avoid leaking stale p2m mappings on
* failure.
*/
- vpci_remove_device(v->vpci.pdev);
+ vpci_deassign_device(v->vpci.pdev);
write_unlock(&v->domain->pci_lock);
}
diff --git a/xen/drivers/vpci/vpci.c b/xen/drivers/vpci/vpci.c
index 4fec4b26d9..9dacbcf958 100644
--- a/xen/drivers/vpci/vpci.c
+++ b/xen/drivers/vpci/vpci.c
@@ -36,7 +36,7 @@ extern vpci_register_init_t *const __start_vpci_array[];
extern vpci_register_init_t *const __end_vpci_array[];
#define NUM_VPCI_INIT (__end_vpci_array - __start_vpci_array)
-void vpci_remove_device(struct pci_dev *pdev)
+void vpci_deassign_device(struct pci_dev *pdev)
{
ASSERT(rw_is_write_locked(&pdev->domain->pci_lock));
@@ -69,7 +69,7 @@ void vpci_remove_device(struct pci_dev *pdev)
pdev->vpci = NULL;
}
-int vpci_add_handlers(struct pci_dev *pdev)
+int vpci_assign_device(struct pci_dev *pdev)
{
unsigned int i;
const unsigned long *ro_map;
@@ -103,7 +103,7 @@ int vpci_add_handlers(struct pci_dev *pdev)
}
if ( rc )
- vpci_remove_device(pdev);
+ vpci_deassign_device(pdev);
return rc;
}
diff --git a/xen/include/xen/vpci.h b/xen/include/xen/vpci.h
index d743d96a10..75cfb532ee 100644
--- a/xen/include/xen/vpci.h
+++ b/xen/include/xen/vpci.h
@@ -25,11 +25,11 @@ typedef int vpci_register_init_t(struct pci_dev *dev);
static vpci_register_init_t *const x##_entry \
__used_section(".data.vpci." p) = x
-/* Add vPCI handlers to device. */
-int __must_check vpci_add_handlers(struct pci_dev *pdev);
+/* Assign vPCI to device by adding handlers to device. */
+int __must_check vpci_assign_device(struct pci_dev *pdev);
/* Remove all handlers and free vpci related structures. */
-void vpci_remove_device(struct pci_dev *pdev);
+void vpci_deassign_device(struct pci_dev *pdev);
/* Add/remove a register handler. */
int __must_check vpci_add_register(struct vpci *vpci,
@@ -235,12 +235,12 @@ bool vpci_ecam_read(pci_sbdf_t sbdf, unsigned int reg,
unsigned int len,
#else /* !CONFIG_HAS_VPCI */
struct vpci_vcpu {};
-static inline int vpci_add_handlers(struct pci_dev *pdev)
+static inline int vpci_assign_device(struct pci_dev *pdev)
{
return 0;
}
-static inline void vpci_remove_device(struct pci_dev *pdev) { }
+static inline void vpci_deassign_device(struct pci_dev *pdev) { }
static inline void vpci_dump_msi(void) { }
--
2.42.0
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |