|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH v10 1/2] xen/riscv: introduce early_printk basic stuff
On Tue, Feb 7, 2023 at 10:49 PM Oleksii Kurochko
<oleksii.kurochko@xxxxxxxxx> wrote:
>
> Because printk() relies on a serial driver (like the ns16550 driver)
> and drivers require working virtual memory (ioremap()) there is not
> print functionality early in Xen boot.
>
> The patch introduces the basic stuff of early_printk functionality
> which will be enough to print 'hello from C environment".
>
> Originally early_printk.{c,h} was introduced by Bobby Eshleman
> (https://github.com/glg-rv/xen/commit/a3c9916bbdff7ad6030055bbee7e53d1aab71384)
> but some functionality was changed:
> early_printk() function was changed in comparison with the original as
> common isn't being built now so there is no vscnprintf.
>
> This commit adds early printk implementation built on the putc SBI call.
>
> As sbi_console_putchar() is already being planned for deprecation
> it is used temporarily now and will be removed or reworked after
> real uart will be ready.
>
> Signed-off-by: Bobby Eshleman <bobby.eshleman@xxxxxxxxx>
> Signed-off-by: Oleksii Kurochko <oleksii.kurochko@xxxxxxxxx>
> Reviewed-by: Bobby Eshleman <bobby.eshleman@xxxxxxxxx>
Reviewed-by: Alistair Francis <alistair.francis@xxxxxxx>
Alistair
> ---
> Changes in V10:
> - Miss to add the check in V9 so add it in V10
> ---
> Changes in V9:
> - Bring "cmodel=medany" check back to be sure that C function is safe to
> be
> called in early boot when MMU is off ( e.g. VA != PA )
> ---
> Changes in V8:
> - Nothing was changed
> ---
> Changes in V7:
> - Nothing was changed
> ---
> Changes in V6:
> - Remove __riscv_cmodel_medany check from early_printk.c
> ---
> Changes in V5:
> - Code style fixes
> - Change an error message of #error in case of __riscv_cmodel_medany
> isn't defined
> ---
> Changes in V4:
> - Remove "depends on RISCV*" from Kconfig.debug as it is located in
> arch specific folder so by default RISCV configs should be ebabled.
> - Add "ifdef __riscv_cmodel_medany" to be sure that PC-relative addressing
> is used as early_*() functions can be called from head.S with MMU-off
> and
> before relocation (if it would be needed at all for RISC-V)
> - fix code style
> ---
> Changes in V3:
> - reorder headers in alphabetical order
> - merge changes related to start_xen() function from "[PATCH v2 7/8]
> xen/riscv: print hello message from C env" to this patch
> - remove unneeded parentheses in definition of STACK_SIZE
> ---
> Changes in V2:
> - introduce STACK_SIZE define.
> - use consistent padding between instruction mnemonic and operand(s)
> ---
> xen/arch/riscv/Kconfig.debug | 5 +++
> xen/arch/riscv/Makefile | 1 +
> xen/arch/riscv/early_printk.c | 44 +++++++++++++++++++++++
> xen/arch/riscv/include/asm/early_printk.h | 12 +++++++
> xen/arch/riscv/setup.c | 4 +++
> 5 files changed, 66 insertions(+)
> create mode 100644 xen/arch/riscv/early_printk.c
> create mode 100644 xen/arch/riscv/include/asm/early_printk.h
>
> diff --git a/xen/arch/riscv/Kconfig.debug b/xen/arch/riscv/Kconfig.debug
> index e69de29bb2..608c9ff832 100644
> --- a/xen/arch/riscv/Kconfig.debug
> +++ b/xen/arch/riscv/Kconfig.debug
> @@ -0,0 +1,5 @@
> +config EARLY_PRINTK
> + bool "Enable early printk"
> + default DEBUG
> + help
> + Enables early printk debug messages
> diff --git a/xen/arch/riscv/Makefile b/xen/arch/riscv/Makefile
> index fd916e1004..1a4f1a6015 100644
> --- a/xen/arch/riscv/Makefile
> +++ b/xen/arch/riscv/Makefile
> @@ -1,3 +1,4 @@
> +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
> obj-$(CONFIG_RISCV_64) += riscv64/
> obj-y += sbi.o
> obj-y += setup.o
> diff --git a/xen/arch/riscv/early_printk.c b/xen/arch/riscv/early_printk.c
> new file mode 100644
> index 0000000000..dfe4ad77e2
> --- /dev/null
> +++ b/xen/arch/riscv/early_printk.c
> @@ -0,0 +1,44 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * RISC-V early printk using SBI
> + *
> + * Copyright (C) 2021 Bobby Eshleman <bobbyeshleman@xxxxxxxxx>
> + */
> +#include <asm/early_printk.h>
> +#include <asm/sbi.h>
> +
> +/*
> + * When the MMU is off during early boot, any C function called has to
> + * use PC-relative rather than absolute address because the physical address
> + * may not match the virtual address.
> + *
> + * To guarantee PC-relative address cmodel=medany should be used
> + */
> +#ifndef __riscv_cmodel_medany
> +#error "early_*() can be called from head.S with MMU-off"
> +#endif
> +
> +/*
> + * TODO:
> + * sbi_console_putchar is already planned for deprecation
> + * so it should be reworked to use UART directly.
> +*/
> +void early_puts(const char *s, size_t nr)
> +{
> + while ( nr-- > 0 )
> + {
> + if ( *s == '\n' )
> + sbi_console_putchar('\r');
> + sbi_console_putchar(*s);
> + s++;
> + }
> +}
> +
> +void early_printk(const char *str)
> +{
> + while ( *str )
> + {
> + early_puts(str, 1);
> + str++;
> + }
> +}
> diff --git a/xen/arch/riscv/include/asm/early_printk.h
> b/xen/arch/riscv/include/asm/early_printk.h
> new file mode 100644
> index 0000000000..05106e160d
> --- /dev/null
> +++ b/xen/arch/riscv/include/asm/early_printk.h
> @@ -0,0 +1,12 @@
> +#ifndef __EARLY_PRINTK_H__
> +#define __EARLY_PRINTK_H__
> +
> +#include <xen/early_printk.h>
> +
> +#ifdef CONFIG_EARLY_PRINTK
> +void early_printk(const char *str);
> +#else
> +static inline void early_printk(const char *s) {};
> +#endif
> +
> +#endif /* __EARLY_PRINTK_H__ */
> diff --git a/xen/arch/riscv/setup.c b/xen/arch/riscv/setup.c
> index 13e24e2fe1..d09ffe1454 100644
> --- a/xen/arch/riscv/setup.c
> +++ b/xen/arch/riscv/setup.c
> @@ -1,12 +1,16 @@
> #include <xen/compile.h>
> #include <xen/init.h>
>
> +#include <asm/early_printk.h>
> +
> /* Xen stack for bringing up the first CPU. */
> unsigned char __initdata cpu0_boot_stack[STACK_SIZE]
> __aligned(STACK_SIZE);
>
> void __init noreturn start_xen(void)
> {
> + early_printk("Hello from C env\n");
> +
> for ( ;; )
> asm volatile ("wfi");
>
> --
> 2.39.0
>
>
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |