[PATCH] docs/misc/arm: Update references to Linux kernel docs

[Michal Orzel <michal.orzel@xxxxxxx>]

Some time ago, Linux switched the format of docs to ReST and the format
of device-tree bindings to json-schema.

Signed-off-by: Michal Orzel <michal.orzel@xxxxxxx>
---
 docs/misc/arm/booting.txt     | 8 ++++----
 docs/misc/arm/passthrough.txt | 8 ++++----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/docs/misc/arm/booting.txt b/docs/misc/arm/booting.txt
index d3f6ce4755f6..3e0c03e06596 100644
--- a/docs/misc/arm/booting.txt
+++ b/docs/misc/arm/booting.txt
@@ -34,8 +34,8 @@ Xen relies on some settings the firmware has to configure in 
EL3 before starting
 * The bit SCR_EL3.HCE (resp. SCR.HCE for 32-bit ARM) must be set to 1.
 
 
-[1] linux/Documentation/arm/Booting
-Latest version: 
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm/Booting
+[1] linux/Documentation/arm/booting.rst
+Latest version: 
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm/booting.rst
 
-[2] linux/Documentation/arm64/booting.txt
-Latest version: 
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm64/booting.txt
+[2] linux/Documentation/arm64/booting.rst
+Latest version: 
http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/arm64/booting.rst
diff --git a/docs/misc/arm/passthrough.txt b/docs/misc/arm/passthrough.txt
index 219d1cca571b..4f0a024818a2 100644
--- a/docs/misc/arm/passthrough.txt
+++ b/docs/misc/arm/passthrough.txt
@@ -71,8 +71,8 @@ Please refer to your platform docs for the MMIO ranges and 
interrupts.
 They can also be calculated from the original device tree (not
 recommended). You can read about the "interrupts" property format in the
 device tree bindings of the interrupt controller of your platform. For
-example, in the case of GICv2 see [arm,gic.txt]; in the case of GICv3
-see [arm,gic-v3.txt] in the Linux repository. For both GICv2 and GICv3
+example, in the case of GICv2 see [arm,gic.yaml]; in the case of GICv3
+see [arm,gic-v3.yaml] in the Linux repository. For both GICv2 and GICv3
 the "interrupts" property format is the same: the first cell is the
 interrupt type, and the second cell is the interrupt number.  Given that
 SPI numbers start from 32, in this example 80 + 32 = 112.
@@ -187,6 +187,6 @@ assign a network card to a dom0-less guest on Xilinx 
Ultrascale+ MPSoC:
 };
 
 
-[arm,gic.txt]: 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/interrupt-controller/arm,gic.txt
-[arm,gic-v3.txt]: 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+[arm,gic.yaml]: 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/interrupt-controller/arm,gic.yaml
+[arm,gic-v3.yaml]: 
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
 [xl.cfg]: https://xenbits.xen.org/docs/unstable/man/xl.cfg.5.html
-- 
2.25.1