[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [XEN v2 10/12] xen/Arm: GICv3: Use ULL instead of UL for 64bits
On 11/1/22 16:43, Ayan Kumar Halder wrote: On 01/11/2022 10:03, Xenia Ragiadakou wrote:Hi Ayan,Hi Xenia,On 10/31/22 17:13, Ayan Kumar Halder wrote:"unsigned long long" is defined as 64 bits on AArch64 and AArch32 Thus, one should this instead of "unsigned long" which is 32 bits on AArch32. Also use 'PRIx64' instead of 'lx' or 'llx' to print uint64_t. Signed-off-by: Ayan Kumar Halder <ayankuma@xxxxxxx> --- Changed from :-v1 - 1. Replace PRIu64 with PRIx64 so that the values are printed in hex asdesired. 2. Use ULL in GITS_BASER_RO_MASK as MMIO registers are always unsigned. xen/arch/arm/gic-v3-lpi.c | 8 ++++---- xen/arch/arm/gic-v3.c | 4 ++-- xen/arch/arm/include/asm/gic_v3_defs.h | 2 +- xen/arch/arm/include/asm/gic_v3_its.h | 2 +- xen/arch/arm/vgic-v3-its.c | 17 +++++++++-------- 5 files changed, 17 insertions(+), 16 deletions(-) diff --git a/xen/arch/arm/gic-v3-lpi.c b/xen/arch/arm/gic-v3-lpi.c index 61d90eb386..9ca74bc321 100644 --- a/xen/arch/arm/gic-v3-lpi.c +++ b/xen/arch/arm/gic-v3-lpi.c@@ -134,7 +134,7 @@ void gicv3_set_redist_address(paddr_t address, unsigned int redist_id)uint64_t gicv3_get_redist_address(unsigned int cpu, bool use_pta) { if ( use_pta ) - return per_cpu(lpi_redist, cpu).redist_addr & GENMASK(51, 16);+ return per_cpu(lpi_redist, cpu).redist_addr & GENMASK_ULL(51, 16);else return per_cpu(lpi_redist, cpu).redist_id << 16; }@@ -253,7 +253,7 @@ static int gicv3_lpi_allocate_pendtable(unsigned int cpu)return -ENOMEM;/* Make sure the physical address can be encoded in the register. */- if ( virt_to_maddr(pendtable) & ~GENMASK(51, 16) ) + if ( virt_to_maddr(pendtable) & ~GENMASK_ULL(51, 16) ) { xfree(pendtable); return -ERANGE;@@ -281,7 +281,7 @@ static int gicv3_lpi_set_pendtable(void __iomem *rdist_base)return -ENOMEM; } - ASSERT(!(virt_to_maddr(pendtable) & ~GENMASK(51, 16))); + ASSERT(!(virt_to_maddr(pendtable) & ~GENMASK_ULL(51, 16)));val = GIC_BASER_CACHE_RaWaWb << GICR_PENDBASER_INNER_CACHEABILITY_SHIFT; val |= GIC_BASER_CACHE_SameAsInner << GICR_PENDBASER_OUTER_CACHEABILITY_SHIFT; @@ -329,7 +329,7 @@ static int gicv3_lpi_set_proptable(void __iomem * rdist_base)return -ENOMEM;/* Make sure the physical address can be encoded in the register. */- if ( (virt_to_maddr(table) & ~GENMASK(51, 12)) ) + if ( (virt_to_maddr(table) & ~GENMASK_ULL(51, 12)) ) { xfree(table); return -ERANGE; diff --git a/xen/arch/arm/gic-v3.c b/xen/arch/arm/gic-v3.c index 8b4b168e78..d8ce0f46c6 100644 --- a/xen/arch/arm/gic-v3.c +++ b/xen/arch/arm/gic-v3.c @@ -417,12 +417,12 @@ static void gicv3_dump_state(const struct vcpu *v) if ( v == current ) { for ( i = 0; i < gicv3_info.nr_lrs; i++ ) - printk(" HW_LR[%d]=%llx\n", i, gicv3_ich_read_lr(i));+ printk(" HW_LR[%d]=%" PRIx64 "\n", i, gicv3_ich_read_lr(i));} else { for ( i = 0; i < gicv3_info.nr_lrs; i++ ) - printk(" VCPU_LR[%d]=%llx\n", i, v->arch.gic.v3.lr[i]);+ printk(" VCPU_LR[%d]=%" PRIx64 "\n", i, v->arch.gic.v3.lr[i]);} }diff --git a/xen/arch/arm/include/asm/gic_v3_defs.h b/xen/arch/arm/include/asm/gic_v3_defs.hindex 87115f8b25..3a24bd4825 100644 --- a/xen/arch/arm/include/asm/gic_v3_defs.h +++ b/xen/arch/arm/include/asm/gic_v3_defs.h @@ -195,7 +195,7 @@ #define ICH_SGI_IRQMODE_SHIFT 40 #define ICH_SGI_IRQMODE_MASK 0x1 -#define ICH_SGI_TARGET_OTHERS 1UL +#define ICH_SGI_TARGET_OTHERS 1ULL #define ICH_SGI_TARGET_LIST 0 #define ICH_SGI_IRQ_SHIFT 24 #define ICH_SGI_IRQ_MASK 0xfdiff --git a/xen/arch/arm/include/asm/gic_v3_its.h b/xen/arch/arm/include/asm/gic_v3_its.hindex fae3f6ecef..5ae50b18ea 100644 --- a/xen/arch/arm/include/asm/gic_v3_its.h +++ b/xen/arch/arm/include/asm/gic_v3_its.hChanges not required as ITS is not supported on AArch32 v8R GIC.@@ -38,7 +38,7 @@ #define GITS_PIDR2 GICR_PIDR2 /* Register bits */ -#define GITS_VALID_BIT BIT(63, UL) +#define GITS_VALID_BIT BIT(63, ULL) #define GITS_CTLR_QUIESCENT BIT(31, UL) #define GITS_CTLR_ENABLE BIT(0, UL)It seems that you forgot GITS_BASER_INDIRECT, that is BIT(62, UL).diff --git a/xen/arch/arm/vgic-v3-its.c b/xen/arch/arm/vgic-v3-its.c index 58d939b85f..c5e02b2c41 100644 --- a/xen/arch/arm/vgic-v3-its.c +++ b/xen/arch/arm/vgic-v3-its.cChanges not required as ITS is not supported on AArch32 v8R GIC.@@ -96,13 +96,13 @@ typedef uint16_t coll_table_entry_t; * in the lowest 5 bits of the word. */ typedef uint64_t dev_table_entry_t; -#define DEV_TABLE_ITT_ADDR(x) ((x) & GENMASK(51, 8)) +#define DEV_TABLE_ITT_ADDR(x) ((x) & GENMASK_ULL(51, 8)) #define DEV_TABLE_ITT_SIZE(x) (BIT(((x) & GENMASK(4, 0)) + 1, UL)) #define DEV_TABLE_ENTRY(addr, bits) \ (((addr) & GENMASK(51, 8)) | (((bits) - 1) & GENMASK(4, 0))) #define GITS_BASER_RO_MASK (GITS_BASER_TYPE_MASK | \- (0x1fL << GITS_BASER_ENTRY_SIZE_SHIFT)) + (0x1ULL << GITS_BASER_ENTRY_SIZE_SHIFT))You have accidently dropped 'f' from the mask.Yes, actually I intentionally dropped it.AFAIU, 'fL' represent a floating point literal. This does not make sense are the MMIO registers are always unsigned long (32 bit) or unsigned long long (64 bit). Probably you got a bit confused. Here f is just a hex digit. The expression cannot be a hex floating point literal because there is no exponent part. So, I corrected it.I noticed that you change to ULL only a part of GENMASK and BIT occurences, I cannot see why. Maybe I m missing sth.Actually, I am trying to change only where the shift exceeds 32 bits.Also, with patch [XEN v2 12/12] xen/Arm: GICv3: Enable GICv3 for AArch32, you disable ITS support for arm32, so it seems that those changes in ITS related files are not required (not that do any harm to have).Sorry, this is my mistake. I should not have changed gic_v3_its.h or vgic-v3-its.c as they are not used for AArch32 v8R GIC.I will fix this in v3. - Ayan/* * The physical address is encoded slightly differently depending on @@ -112,10 +112,10 @@ typedef uint64_t dev_table_entry_t; static paddr_t get_baser_phys_addr(uint64_t reg) { if ( reg & BIT(9, UL) ) - return (reg & GENMASK(47, 16)) | + return (reg & GENMASK_ULL(47, 16)) | ((reg & GENMASK(15, 12)) << 36); else - return reg & GENMASK(47, 12); + return reg & GENMASK_ULL(47, 12); } /* Must be called with the ITS lock held. */@@ -414,7 +414,7 @@ static int update_lpi_property(struct domain *d, struct pending_irq *p)if ( !d->arch.vgic.rdists_enabled ) return 0; - addr = d->arch.vgic.rdist_propbase & GENMASK(51, 12); + addr = d->arch.vgic.rdist_propbase & GENMASK_ULL(51, 12); ret = access_guest_memory_by_ipa(d, addr + p->irq - LPI_OFFSET,&property, sizeof(property), false);@@ -897,7 +897,8 @@ out_unlock: static void dump_its_command(uint64_t *command) {- gdprintk(XENLOG_WARNING, " cmd 0x%02lx: %016lx %016lx %016lx %016lx\n",+ gdprintk(XENLOG_WARNING, " cmd 0x%" PRIx64 ": %" PRIx64 + "%" PRIx64 "%" PRIx64 "%" PRIx64 "\n", its_cmd_get_command(command), command[0], command[1], command[2], command[3]); } @@ -909,7 +910,7 @@ static void dump_its_command(uint64_t *command) */static int vgic_its_handle_cmds(struct domain *d, struct virt_its *its){ - paddr_t addr = its->cbaser & GENMASK(51, 12); + paddr_t addr = its->cbaser & GENMASK_ULL(51, 12); uint64_t command[4]; ASSERT(spin_is_locked(&its->vcmd_lock)); @@ -1122,7 +1123,7 @@ read_as_zero_64: read_impl_defined: printk(XENLOG_G_DEBUG- "%pv: vGITS: RAZ on implementation defined register offset %#04lx\n", + "%pv: vGITS: RAZ on implementation defined register offset %" PRIx64 "#04llx\n",v, info->gpa & 0xffff); *r = 0; return 1; -- Xenia
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |