[ImageBuilder v2] Add support for 64-bit addresses/sizes

[Michal Orzel <michal.orzel@xxxxxxx>]

At the moment, ImageBuilder assumes that all addresses/sizes are
32-bit max. It sets #{address,size}-cells to 0x2 and puts 0x0 as the
value for the first cell. Because of that, we cannot specify
MEMORY_START and MEMORY_END to be above 32-bits (e.g. to place the images
in the upper memory bank).

Add support to properly handle 64-bit addresses/sizes:
 - add function split_into_halves to split the value passed as a first
   argument into upper and lower halves. These are then set as values for
   variables passed respetively as the second and third argument,
 - add function split_addr_size to split address and size and form a
   string to be passed to dt_set as data argument for reg property.

Signed-off-by: Michal Orzel <michal.orzel@xxxxxxx>
---
Changes in v2:
- redesign a patch based on master-next instead of NXP dynamic assignment patch
---
 scripts/uboot-script-gen | 33 ++++++++++++++++++++++++++++-----
 1 file changed, 28 insertions(+), 5 deletions(-)

diff --git a/scripts/uboot-script-gen b/scripts/uboot-script-gen
index b24dca2b7f7e..09d237d192c1 100755
--- a/scripts/uboot-script-gen
+++ b/scripts/uboot-script-gen
@@ -22,6 +22,29 @@ function dt_mknode()
     fi
 }
 
+# Usage:
+# split_into_halves <value> <variable_to_store_upper> <variable_to_store_lower>
+function split_into_halves()
+{
+    local value=$1
+    local upper=$2
+    local lower=$3
+
+    eval "$upper=$(printf "0x%X\n" $(($value >> 32)))"
+    eval "$lower=$(printf "0x%X\n" $(($value & 0xFFFFFFFF)))"
+}
+
+function split_addr_size()
+{
+    local addr=$1
+    local size=$2
+
+    split_into_halves $addr addr_upper addr_lower
+    split_into_halves $size size_upper size_lower
+
+    echo "$addr_upper $addr_lower $size_upper $size_lower"
+}
+
 # data_type is either
 #   int
 #   hex
@@ -93,7 +116,7 @@ function add_device_tree_kernel()
 
     dt_mknode "$path" "module$addr"
     dt_set "$path/module$addr" "compatible" "str_a" "multiboot,kernel 
multiboot,module"
-    dt_set "$path/module$addr" "reg" "hex"  "0x0 $addr 0x0 $(printf "0x%x" 
$size)"
+    dt_set "$path/module$addr" "reg" "hex"  "$(split_addr_size $addr $size)"
     dt_set "$path/module$addr" "bootargs" "str" "$bootargs"
 }
 
@@ -106,7 +129,7 @@ function add_device_tree_ramdisk()
 
     dt_mknode "$path"  "module$addr"
     dt_set "$path/module$addr" "compatible" "str_a" "multiboot,ramdisk 
multiboot,module"
-    dt_set "$path/module$addr" "reg" "hex"  "0x0 $addr 0x0 $(printf "0x%x" 
$size)"
+    dt_set "$path/module$addr" "reg" "hex"  "$(split_addr_size $addr $size)"
 }
 
 
@@ -118,7 +141,7 @@ function add_device_tree_passthrough()
 
     dt_mknode "$path"  "module$addr"
     dt_set "$path/module$addr" "compatible" "str_a" "multiboot,device-tree 
multiboot,module"
-    dt_set "$path/module$addr" "reg" "hex"  "0x0 $addr 0x0 $(printf "0x%x" 
$size)"
+    dt_set "$path/module$addr" "reg" "hex"  "$(split_addr_size $addr $size)"
 }
 
 function add_device_tree_mem()
@@ -260,7 +283,7 @@ function xen_device_tree_editing()
     then
         dt_mknode "/chosen" "dom0"
         dt_set "/chosen/dom0" "compatible" "str_a" "xen,linux-zimage 
xen,multiboot-module multiboot,module"
-        dt_set "/chosen/dom0" "reg" "hex" "0x0 $dom0_kernel_addr 0x0 $(printf 
"0x%x" $dom0_kernel_size)"
+        dt_set "/chosen/dom0" "reg" "hex" "$(split_addr_size $dom0_kernel_addr 
$dom0_kernel_size)"
         dt_set "/chosen" "xen,dom0-bootargs" "str" "$DOM0_CMD"
     fi
 
@@ -268,7 +291,7 @@ function xen_device_tree_editing()
     then
         dt_mknode "/chosen" "dom0-ramdisk"
         dt_set "/chosen/dom0-ramdisk" "compatible" "str_a" "xen,linux-initrd 
xen,multiboot-module multiboot,module"
-        dt_set "/chosen/dom0-ramdisk" "reg" "hex" "0x0 $ramdisk_addr 0x0 
$(printf "0x%x" $ramdisk_size)"
+        dt_set "/chosen/dom0-ramdisk" "reg" "hex" "$(split_addr_size 
$ramdisk_addr $ramdisk_size)"
     fi
 
     i=0
-- 
2.25.1