[PATCH 5/9] automation: qemu-smoke-arm32.sh: Modify script to use ImageBuilder

[Michal Orzel <michal.orzel@xxxxxxx>]

Take an example from arm64 qemu test scripts and use ImageBuilder
to generate u-boot script automatically. Calculating the addresses
manually is quite error prone and also we will be able to benefit
from using ImageBuilder when adding domUs to this test in the future.

Install and use u-boot from the debian package.
Modify the script so that binaries are loaded from u-boot via tftp.

Signed-off-by: Michal Orzel <michal.orzel@xxxxxxx>
---
 automation/scripts/qemu-smoke-arm32.sh | 57 ++++++++++++--------------
 1 file changed, 27 insertions(+), 30 deletions(-)

diff --git a/automation/scripts/qemu-smoke-arm32.sh 
b/automation/scripts/qemu-smoke-arm32.sh
index 530f3892fdd3..765facbe4d66 100755
--- a/automation/scripts/qemu-smoke-arm32.sh
+++ b/automation/scripts/qemu-smoke-arm32.sh
@@ -4,7 +4,9 @@ set -ex
 
 export DEBIAN_FRONTENT=noninteractive
 apt-get -qy update
-apt-get -qy install --no-install-recommends device-tree-compiler \
+apt-get -qy install --no-install-recommends u-boot-qemu \
+                                            u-boot-tools \
+                                            device-tree-compiler \
                                             curl \
                                             cpio
 
@@ -20,10 +22,6 @@ tar xvzf ../initrd.tar.gz
 find . | cpio -H newc -o | gzip > ../initrd.gz
 cd ..
 
-kernel=`stat -L --printf="%s" vmlinuz`
-initrd=`stat -L --printf="%s" initrd.gz`
-
-# For Xen, we need a couple of more node. Dump the DT from QEMU and add them
 # XXX QEMU looks for "efi-virtio.rom" even if it is unneeded
 curl -fsSLO https://github.com/qemu/qemu/raw/v5.2.0/pc-bios/efi-virtio.rom
 ./qemu-system-arm \
@@ -36,31 +34,31 @@ curl -fsSLO 
https://github.com/qemu/qemu/raw/v5.2.0/pc-bios/efi-virtio.rom
    -display none \
    -machine dumpdtb=virt.dtb
 
-dtc -I dtb -O dts virt.dtb > virt.dts
+# ImageBuilder
+echo 'MEMORY_START="0x40000000"
+MEMORY_END="0x80000000"
+
+DEVICE_TREE="virt.dtb"
+XEN="xen"
+DOM0_KERNEL="vmlinuz"
+DOM0_RAMDISK="initrd.gz"
+DOM0_CMD="console=hvc0 earlyprintk clk_ignore_unused root=/dev/ram0 
rdinit=/bin/sh"
+XEN_CMD="console=dtuart dom0_mem=512M bootscrub=0"
+
+NUM_DOMUS=0
+
+LOAD_CMD="tftpb"
+BOOT_CMD="bootm"
+UBOOT_SOURCE="boot.source"
+UBOOT_SCRIPT="boot.scr"' > config
 
-cat >> virt.dts << EOF
-/ {
-       chosen {
-               #address-cells = <0x2>;
-               #size-cells = <0x2>;
-               stdout-path = "/pl011@9000000";
-        xen,xen-bootargs = "console=dtuart dtuart=/pl011@9000000 dom0_mem=512M 
bootscrub=0";
-               xen,dom0-bootargs = "console=tty0 console=hvc0 earlyprintk 
clk_ignore_unused root=/dev/ram0 rdinit=/bin/sh";
-               dom0 {
-                       compatible = "xen,linux-zimage", "xen,multiboot-module";
-                       reg = <0x0 0x1000000 0x0 $kernel>;
-               };
-        dom0-ramdisk {
-                       compatible = "xen,linux-initrd", "xen,multiboot-module";
-                       reg = <0x0 0x3200000 0x0 $initrd>;
-               };
-       };
-};
-EOF
-dtc -I dts -O dtb virt.dts > virt.dtb
+rm -rf imagebuilder
+git clone https://gitlab.com/ViryaOS/imagebuilder
+bash imagebuilder/scripts/uboot-script-gen -t tftp -d . -c config
 
 rm -f smoke.serial
 set +e
+echo "  virtio scan; dhcp; tftpb 0x40000000 boot.scr; source 0x40000000"| \
 timeout -k 1 240 \
 ./qemu-system-arm \
    -machine virt \
@@ -70,11 +68,10 @@ timeout -k 1 240 \
    -serial stdio \
    -monitor none \
    -display none \
-   -dtb virt.dtb \
    -no-reboot \
-   -kernel ./xen \
-   -device loader,file=./vmlinuz,addr=0x1000000 \
-   -device loader,file=./initrd.gz,addr=0x3200000 |& tee smoke.serial
+   -device virtio-net-pci,netdev=n0 \
+   -netdev user,id=n0,tftp=./ \
+   -bios /usr/lib/u-boot/qemu_arm/u-boot.bin |& tee smoke.serial
 
 set -e
 (grep -q "^/ #" smoke.serial) || exit 1
-- 
2.25.1