[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [for-4.17 v2 3/3] automation: Add a new job for testing boot time cpupools on arm64
Add a new test job qemu-smoke-arm64-gcc-boot-cpupools that will execute script qemu-smoke-arm64.sh to test boot time cpupools feature. Enable CONFIG_BOOT_TIME_CPUPOOLS for the arm64 build and add a new test case in qemu-smoke-arm64.sh that if selected will make use of the ImageBuilder feature to create cpupool with cpu@1, null scheduler and assign it to domU. Add a check in dom0 xen.start to see if domU is assigned a Pool-1 with null scheduler. Take the opportunity to refactor the qemu-smoke-arm64.sh script as follows: - use domU_check to store the test's commands to be run from domU - use dom0_check to store the test's commands to be run from dom0 - use fdtput instead of sed to perform dtb modifications - use more meaningful messages for "passed" variable. This way we can grep for messages reported either by domU or dom0 and get rid of assumption that tests can only be run from domU Signed-off-by: Michal Orzel <michal.orzel@xxxxxxx> --- Changes in v2: - use ImageBuilder feature to create boot-time cpupools - also check if the scheduler is set up properly --- automation/gitlab-ci/test.yaml | 19 ++++++++++++++ automation/scripts/build | 3 ++- automation/scripts/qemu-smoke-arm64.sh | 36 +++++++++++++++++++------- 3 files changed, 48 insertions(+), 10 deletions(-) diff --git a/automation/gitlab-ci/test.yaml b/automation/gitlab-ci/test.yaml index 07209820b474..d899b3bdbf7a 100644 --- a/automation/gitlab-ci/test.yaml +++ b/automation/gitlab-ci/test.yaml @@ -100,6 +100,25 @@ qemu-smoke-arm64-gcc-staticmem: tags: - arm64 +qemu-smoke-arm64-gcc-boot-cpupools: + extends: .test-jobs-common + variables: + CONTAINER: debian:unstable-arm64v8 + script: + - ./automation/scripts/qemu-smoke-arm64.sh boot-cpupools 2>&1 | tee qemu-smoke-arm64.log + needs: + - alpine-3.12-gcc-arm64 + - alpine-3.12-arm64-rootfs-export + - kernel-5.19-arm64-export + - qemu-system-aarch64-6.0.0-arm64-export + artifacts: + paths: + - smoke.serial + - '*.log' + when: always + tags: + - arm64 + qemu-smoke-arm32-gcc: extends: .test-jobs-common variables: diff --git a/automation/scripts/build b/automation/scripts/build index 2b9f2d2b541a..2f15ab3198e6 100755 --- a/automation/scripts/build +++ b/automation/scripts/build @@ -19,7 +19,8 @@ else echo " CONFIG_EXPERT=y CONFIG_UNSUPPORTED=y -CONFIG_STATIC_MEMORY=y" > xen/.config +CONFIG_STATIC_MEMORY=y +CONFIG_BOOT_TIME_CPUPOOLS=y" > xen/.config make -j$(nproc) -C xen olddefconfig else make -j$(nproc) -C xen defconfig diff --git a/automation/scripts/qemu-smoke-arm64.sh b/automation/scripts/qemu-smoke-arm64.sh index 7ac96027760d..f803835779f4 100755 --- a/automation/scripts/qemu-smoke-arm64.sh +++ b/automation/scripts/qemu-smoke-arm64.sh @@ -4,20 +4,22 @@ set -ex test_variant=$1 -passed="passed" -check=" +if [ -z "${test_variant}" ]; then + passed="ping test passed" + domU_check=" until ifconfig eth0 192.168.0.2 &> /dev/null && ping -c 10 192.168.0.1; do sleep 30 done echo \"${passed}\" " +fi if [[ "${test_variant}" == "static-mem" ]]; then # Memory range that is statically allocated to DOM1 domu_base="50000000" domu_size="10000000" passed="${test_variant} test passed" - check=" + domU_check=" current=\$(hexdump -e '16/1 \"%02x\"' /proc/device-tree/memory@${domu_base}/reg 2>/dev/null) expected=$(printf \"%016x%016x\" 0x${domu_base} 0x${domu_size}) if [[ \"\${expected}\" == \"\${current}\" ]]; then @@ -26,6 +28,16 @@ fi " fi +if [[ "${test_variant}" == "boot-cpupools" ]]; then + # Check if domU0 (id=1) is assigned to Pool-1 with null scheduler + passed="${test_variant} test passed" + dom0_check=" +if xl list -c 1 | grep -q Pool-1 && xl cpupool-list Pool-1 | grep -q Pool-1; then + echo ${passed} +fi +" +fi + export DEBIAN_FRONTENT=noninteractive apt-get -qy update apt-get -qy install --no-install-recommends u-boot-qemu \ @@ -42,11 +54,9 @@ curl -fsSLO https://github.com/qemu/qemu/raw/v5.2.0/pc-bios/efi-virtio.rom -cpu cortex-a57 -machine type=virt \ -m 1024 -smp 2 -display none \ -machine dumpdtb=binaries/virt-gicv2.dtb -# XXX disable pl061 to avoid Linux crash -dtc -I dtb -O dts binaries/virt-gicv2.dtb > binaries/virt-gicv2.dts -sed 's/compatible = "arm,pl061.*/status = "disabled";/g' binaries/virt-gicv2.dts > binaries/virt-gicv2-edited.dts -dtc -I dts -O dtb binaries/virt-gicv2-edited.dts > binaries/virt-gicv2.dtb +# XXX disable pl061 to avoid Linux crash +fdtput binaries/virt-gicv2.dtb -p -t s /pl061@9030000 status disabled # Busybox mkdir -p initrd @@ -66,7 +76,7 @@ echo "#!/bin/sh mount -t proc proc /proc mount -t sysfs sysfs /sys mount -t devtmpfs devtmpfs /dev -${check} +${domU_check} /bin/sh" > initrd/init chmod +x initrd/init cd initrd @@ -98,6 +108,7 @@ ifconfig xenbr0 up ifconfig xenbr0 192.168.0.1 xl network-attach 1 type=vif +${dom0_check} " > etc/local.d/xen.start chmod +x etc/local.d/xen.start echo "rc_verbose=yes" >> etc/rc.conf @@ -127,6 +138,13 @@ if [[ "${test_variant}" == "static-mem" ]]; then echo -e "\nDOMU_STATIC_MEM[0]=\"0x${domu_base} 0x${domu_size}\"" >> binaries/config fi +if [[ "${test_variant}" == "boot-cpupools" ]]; then + echo ' +CPUPOOL[0]="cpu@1 null" +DOMU_CPUPOOL[0]=0 +NUM_CPUPOOLS=1' >> binaries/config +fi + rm -rf imagebuilder git clone https://gitlab.com/ViryaOS/imagebuilder bash imagebuilder/scripts/uboot-script-gen -t tftp -d binaries/ -c binaries/config @@ -148,5 +166,5 @@ timeout -k 1 240 \ -bios /usr/lib/u-boot/qemu_arm64/u-boot.bin |& tee smoke.serial set -e -(grep -q "^Welcome to Alpine Linux" smoke.serial && grep -q "DOM1: ${passed}" smoke.serial) || exit 1 +(grep -q "^Welcome to Alpine Linux" smoke.serial && grep -q "${passed}" smoke.serial) || exit 1 exit 0 -- 2.25.1
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |