Re: [PATCH v4 1/2] x86/mem_sharing: make fork_reset more configurable

[Tamas K Lengyel <tamas@xxxxxxxxxxxxx>]

On Mon, Apr 25, 2022 at 10:12 AM Roger Pau Monné <roger.pau@xxxxxxxxxx> wrote:
>
> On Wed, Apr 13, 2022 at 09:41:51AM -0400, Tamas K Lengyel wrote:
> > Allow specify distinct parts of the fork VM to be reset. This is useful 
> > when a
> > fuzzing operation involves mapping in only a handful of pages that are known
> > ahead of time. Throwing these pages away just to be re-copied immediately is
> > expensive, thus allowing to specify partial resets can speed things up.
> >
> > Also allow resetting to be initiated from vm_event responses as an
> > optiomization.
> >
> > Signed-off-by: Tamas K Lengyel <tamas.lengyel@xxxxxxxxx>
>
> Reviewed-by: Roger Pau Monné <roger.pau@xxxxxxxxxx>

Thank you!

> > ---
> > v4: No change
> > v3: Rebase on simpler approach after dropping empty_p2m feature
> > v2: address review comments and add more sanity checking
> > ---
> >  tools/include/xenctrl.h                |  3 ++-
> >  tools/libs/ctrl/xc_memshr.c            |  7 ++++++-
> >  xen/arch/x86/include/asm/mem_sharing.h |  9 +++++++++
> >  xen/arch/x86/mm/mem_sharing.c          | 24 +++++++++++++++++++-----
> >  xen/common/vm_event.c                  | 15 +++++++++++++++
> >  xen/include/public/memory.h            |  4 +++-
> >  xen/include/public/vm_event.h          |  8 ++++++++
> >  7 files changed, 62 insertions(+), 8 deletions(-)
> >
> > diff --git a/tools/include/xenctrl.h b/tools/include/xenctrl.h
> > index 95bd5eca67..1b089a2c02 100644
> > --- a/tools/include/xenctrl.h
> > +++ b/tools/include/xenctrl.h
> > @@ -2290,7 +2290,8 @@ int xc_memshr_fork(xc_interface *xch,
> >   *
> >   * With VMs that have a lot of memory this call may block for a long time.
> >   */
> > -int xc_memshr_fork_reset(xc_interface *xch, uint32_t forked_domain);
> > +int xc_memshr_fork_reset(xc_interface *xch, uint32_t forked_domain,
> > +                         bool reset_state, bool reset_memory);
> >
> >  /* Debug calls: return the number of pages referencing the shared frame 
> > backing
> >   * the input argument. Should be one or greater.
> > diff --git a/tools/libs/ctrl/xc_memshr.c b/tools/libs/ctrl/xc_memshr.c
> > index a6cfd7dccf..a0d0b894e2 100644
> > --- a/tools/libs/ctrl/xc_memshr.c
> > +++ b/tools/libs/ctrl/xc_memshr.c
> > @@ -257,12 +257,17 @@ int xc_memshr_fork(xc_interface *xch, uint32_t 
> > pdomid, uint32_t domid,
> >      return xc_memshr_memop(xch, domid, &mso);
> >  }
> >
> > -int xc_memshr_fork_reset(xc_interface *xch, uint32_t domid)
> > +int xc_memshr_fork_reset(xc_interface *xch, uint32_t domid, bool 
> > reset_state,
> > +                         bool reset_memory)
> >  {
> >      xen_mem_sharing_op_t mso;
> >
> >      memset(&mso, 0, sizeof(mso));
> >      mso.op = XENMEM_sharing_op_fork_reset;
> > +    if ( reset_state )
> > +        mso.u.fork.flags |= XENMEM_FORK_RESET_STATE;
> > +    if ( reset_memory )
> > +        mso.u.fork.flags |= XENMEM_FORK_RESET_MEMORY;
>
> IMO would be clearer to init mso fields at definition.

Not sure what you mean exactly, mso = { ... }; ? I think the logic is
pretty clear as-is and I don't have any preference for one style vs
the other.

>
> > diff --git a/xen/common/vm_event.c b/xen/common/vm_event.c
> > index 84cf52636b..d26a6699fc 100644
> > --- a/xen/common/vm_event.c
> > +++ b/xen/common/vm_event.c
> > @@ -28,6 +28,11 @@
> >  #include <asm/p2m.h>
> >  #include <asm/monitor.h>
> >  #include <asm/vm_event.h>
> > +
> > +#ifdef CONFIG_MEM_SHARING
> > +#include <asm/mem_sharing.h>
> > +#endif
> > +
> >  #include <xsm/xsm.h>
> >  #include <public/hvm/params.h>
> >
> > @@ -394,6 +399,16 @@ static int vm_event_resume(struct domain *d, struct 
> > vm_event_domain *ved)
> >              if ( rsp.reason == VM_EVENT_REASON_MEM_PAGING )
> >                  p2m_mem_paging_resume(d, &rsp);
> >  #endif
> > +#ifdef CONFIG_MEM_SHARING
> > +            if ( mem_sharing_is_fork(d) )
> > +            {
> > +                bool reset_state = rsp.flags & 
> > VM_EVENT_FLAG_RESET_FORK_STATE;
> > +                bool reset_mem = rsp.flags & 
> > VM_EVENT_FLAG_RESET_FORK_MEMORY;
> > +
> > +                if ( reset_state || reset_mem )
> > +                    ASSERT(!mem_sharing_fork_reset(d, reset_state, 
> > reset_mem));
>
> Might be appropriate to destroy the domain in case fork reset fails?
> ASSERT will only help in debug builds.

No, I would prefer not destroying the domain here. If it ever becomes
necessary the right way would be to introduce a new monitor event to
signal an error and let the listener decide what to do. At the moment
I don't see that being necessary as there are no known scenarios where
we would be able to setup a fork but fail to reset is.

>
> > +            }
> > +#endif
> >
> >              /*
> >               * Check emulation flags in the arch-specific handler only, as 
> > it
> > diff --git a/xen/include/public/memory.h b/xen/include/public/memory.h
> > index a1a0f0233a..f8d26fb77d 100644
> > --- a/xen/include/public/memory.h
> > +++ b/xen/include/public/memory.h
> > @@ -541,12 +541,14 @@ struct xen_mem_sharing_op {
> >                  uint32_t gref;     /* IN: gref to debug         */
> >              } u;
> >          } debug;
> > -        struct mem_sharing_op_fork {      /* OP_FORK */
> > +        struct mem_sharing_op_fork {      /* OP_FORK{,_RESET} */
> >              domid_t parent_domain;        /* IN: parent's domain id */
> >  /* Only makes sense for short-lived forks */
> >  #define XENMEM_FORK_WITH_IOMMU_ALLOWED (1u << 0)
> >  /* Only makes sense for short-lived forks */
> >  #define XENMEM_FORK_BLOCK_INTERRUPTS   (1u << 1)
>
> Should you add:
>
> /* Only for OP_FORK_RESET. */
>
> > +#define XENMEM_FORK_RESET_STATE        (1u << 2)
> > +#define XENMEM_FORK_RESET_MEMORY       (1u << 3)

I think the flag names are really descriptive already that these apply
to the FORK_RESET case but I would have no objection to that comment
being added at commit.

Thanks again,
Tamas