Re: [PATCH v4 13/14] arm/libxl: Emulated PCI device tree node in libxl

[Rahul Singh <Rahul.Singh@xxxxxxx>]

Hi Stefano,

> On 5 Oct 2021, at 10:32 pm, Stefano Stabellini <sstabellini@xxxxxxxxxx> wrote:
> 
> On Tue, 5 Oct 2021, Rahul Singh wrote:
>>> On 5 Oct 2021, at 1:38 am, Stefano Stabellini <sstabellini@xxxxxxxxxx> 
>>> wrote:
>>> 
>>> On Mon, 4 Oct 2021, Rahul Singh wrote:
>>>> libxl will create an emulated PCI device tree node in the device tree to
>>>> enable the guest OS to discover the virtual PCI during guest boot.
>>>> Emulated PCI device tree node will only be created when there is any
>>>> device assigned to guest.
>>>> 
>>>> A new area has been reserved in the arm guest physical map at
>>>> which the VPCI bus is declared in the device tree (reg and ranges
>>>> parameters of the node).
>>>> 
>>>> Signed-off-by: Rahul Singh <rahul.singh@xxxxxxx>
>>>> ---
>>>> Change in v4:
>>>> - Gate code for x86 for setting the XEN_DOMCTL_CDF_vpci for x86.
>>>> Change in v3:
>>>> - Make GUEST_VPCI_MEM_ADDR address 2MB aligned
>>>> Change in v2:
>>>> - enable doamin_vpci_init() when XEN_DOMCTL_CDF_vpci is set for domain.
>>>> ---
>>>> ---
>>>> tools/include/libxl.h            |   6 ++
>>>> tools/libs/light/libxl_arm.c     | 105 +++++++++++++++++++++++++++++++
>>>> tools/libs/light/libxl_create.c  |   9 +++
>>>> tools/libs/light/libxl_types.idl |   1 +
>>>> tools/xl/xl_parse.c              |   8 +++
>>>> xen/include/public/arch-arm.h    |  10 +++
>>>> 6 files changed, 139 insertions(+)
>>>> 
>>>> diff --git a/tools/include/libxl.h b/tools/include/libxl.h
>>>> index b9ba16d698..3362073b21 100644
>>>> --- a/tools/include/libxl.h
>>>> +++ b/tools/include/libxl.h
>>>> @@ -358,6 +358,12 @@
>>>> */
>>>> #define LIBXL_HAVE_BUILDINFO_ARM_VUART 1
>>>> 
>>>> +/*
>>>> + * LIBXL_HAVE_BUILDINFO_ARM_VPCI indicates that the toolstack supports 
>>>> virtual
>>>> + * PCI for ARM.
>>>> + */
>>>> +#define LIBXL_HAVE_BUILDINFO_ARM_VPCI 1
>>>> +
>>>> /*
>>>> * LIBXL_HAVE_BUILDINFO_GRANT_LIMITS indicates that libxl_domain_build_info
>>>> * has the max_grant_frames and max_maptrack_frames fields.
>>>> diff --git a/tools/libs/light/libxl_arm.c b/tools/libs/light/libxl_arm.c
>>>> index e3140a6e00..52f1ddce48 100644
>>>> --- a/tools/libs/light/libxl_arm.c
>>>> +++ b/tools/libs/light/libxl_arm.c
>>>> @@ -269,6 +269,58 @@ static int fdt_property_regs(libxl__gc *gc, void *fdt,
>>>>    return fdt_property(fdt, "reg", regs, sizeof(regs));
>>>> }
>>>> 
>>>> +static int fdt_property_values(libxl__gc *gc, void *fdt,
>>>> +        const char *name, unsigned num_cells, ...)
>>>> +{
>>>> +    uint32_t prop[num_cells];
>>>> +    be32 *cells = &prop[0];
>>>> +    int i;
>>>> +    va_list ap;
>>>> +    uint32_t arg;
>>>> +
>>>> +    va_start(ap, num_cells);
>>>> +    for (i = 0 ; i < num_cells; i++) {
>>>> +        arg = va_arg(ap, uint32_t);
>>>> +        set_cell(&cells, 1, arg);
>>>> +    }
>>>> +    va_end(ap);
>>>> +
>>>> +    return fdt_property(fdt, name, prop, sizeof(prop));
>>>> +}
>>>> +
>>>> +static int fdt_property_vpci_ranges(libxl__gc *gc, void *fdt,
>>>> +                                    unsigned addr_cells,
>>>> +                                    unsigned size_cells,
>>>> +                                    unsigned num_regs, ...)
>>>> +{
>>>> +    uint32_t regs[num_regs*((addr_cells*2)+size_cells+1)];
>>>> +    be32 *cells = &regs[0];
>>>> +    int i;
>>>> +    va_list ap;
>>>> +    uint64_t arg;
>>>> +
>>>> +    va_start(ap, num_regs);
>>>> +    for (i = 0 ; i < num_regs; i++) {
>>>> +        /* Set the memory bit field */
>>>> +        arg = va_arg(ap, uint32_t);
>>>> +        set_cell(&cells, 1, arg);
>>>> +
>>>> +        /* Set the vpci bus address */
>>>> +        arg = addr_cells ? va_arg(ap, uint64_t) : 0;
>>>> +        set_cell(&cells, addr_cells , arg);
>>>> +
>>>> +        /* Set the cpu bus address where vpci address is mapped */
>>>> +        set_cell(&cells, addr_cells, arg);
>>>> +
>>>> +        /* Set the vpci size requested */
>>>> +        arg = size_cells ? va_arg(ap, uint64_t) : 0;
>>>> +        set_cell(&cells, size_cells, arg);
>>>> +    }
>>>> +    va_end(ap);
>>>> +
>>>> +    return fdt_property(fdt, "ranges", regs, sizeof(regs));
>>>> +}
>>>> +
>>>> static int make_root_properties(libxl__gc *gc,
>>>>                                const libxl_version_info *vers,
>>>>                                void *fdt)
>>>> @@ -668,6 +720,53 @@ static int make_vpl011_uart_node(libxl__gc *gc, void 
>>>> *fdt,
>>>>    return 0;
>>>> }
>>>> 
>>>> +static int make_vpci_node(libxl__gc *gc, void *fdt,
>>>> +        const struct arch_info *ainfo,
>>>> +        struct xc_dom_image *dom)
>>>> +{
>>>> +    int res;
>>>> +    const uint64_t vpci_ecam_base = GUEST_VPCI_ECAM_BASE;
>>>> +    const uint64_t vpci_ecam_size = GUEST_VPCI_ECAM_SIZE;
>>>> +    const char *name = GCSPRINTF("pcie@%"PRIx64, vpci_ecam_base);
>>>> +
>>>> +    res = fdt_begin_node(fdt, name);
>>>> +    if (res) return res;
>>>> +
>>>> +    res = fdt_property_compat(gc, fdt, 1, "pci-host-ecam-generic");
>>>> +    if (res) return res;
>>>> +
>>>> +    res = fdt_property_string(fdt, "device_type", "pci");
>>>> +    if (res) return res;
>>>> +
>>>> +    res = fdt_property_regs(gc, fdt, GUEST_ROOT_ADDRESS_CELLS,
>>>> +            GUEST_ROOT_SIZE_CELLS, 1, vpci_ecam_base, vpci_ecam_size);
>>>> +    if (res) return res;
>>>> +
>>>> +    res = fdt_property_values(gc, fdt, "bus-range", 2, 0, 255);
>>>> +    if (res) return res;
>>>> +
>>>> +    res = fdt_property_cell(fdt, "#address-cells", 3);
>>>> +    if (res) return res;
>>>> +
>>>> +    res = fdt_property_cell(fdt, "#size-cells", 2);
>>>> +    if (res) return res;
>>>> +
>>>> +    res = fdt_property_string(fdt, "status", "okay");
>>>> +    if (res) return res;
>>>> +
>>>> +    res = fdt_property_vpci_ranges(gc, fdt, GUEST_ROOT_ADDRESS_CELLS,
>>>> +        GUEST_ROOT_SIZE_CELLS, 2,
>>>> +        GUEST_VPCI_ADDR_TYPE_MEM, GUEST_VPCI_MEM_ADDR, 
>>>> GUEST_VPCI_MEM_SIZE,
>>>> +        GUEST_VPCI_ADDR_TYPE_PREFETCH_MEM, GUEST_VPCI_PREFETCH_MEM_ADDR,
>>>> +        GUEST_VPCI_PREFETCH_MEM_SIZE);
>>>> +    if (res) return res;
>>>> +
>>>> +    res = fdt_end_node(fdt);
>>>> +    if (res) return res;
>>>> +
>>>> +    return 0;
>>>> +}
>>>> +
>>>> static const struct arch_info *get_arch_info(libxl__gc *gc,
>>>>                                             const struct xc_dom_image *dom)
>>>> {
>>>> @@ -971,6 +1070,9 @@ next_resize:
>>>>        if (info->tee == LIBXL_TEE_TYPE_OPTEE)
>>>>            FDT( make_optee_node(gc, fdt) );
>>>> 
>>>> +        if (libxl_defbool_val(info->arch_arm.vpci))
>>>> +            FDT( make_vpci_node(gc, fdt, ainfo, dom) );
>>>> +
>>>>        if (pfdt)
>>>>            FDT( copy_partial_fdt(gc, fdt, pfdt) );
>>>> 
>>>> @@ -1189,6 +1291,9 @@ void 
>>>> libxl__arch_domain_build_info_setdefault(libxl__gc *gc,
>>>>    /* ACPI is disabled by default */
>>>>    libxl_defbool_setdefault(&b_info->acpi, false);
>>>> 
>>>> +    /* VPCI is disabled by default */
>>>> +    libxl_defbool_setdefault(&b_info->arch_arm.vpci, false);
>>>> +
>>>>    if (b_info->type != LIBXL_DOMAIN_TYPE_PV)
>>>>        return;
>>>> 
>>>> diff --git a/tools/libs/light/libxl_create.c 
>>>> b/tools/libs/light/libxl_create.c
>>>> index e356b2106d..9408526036 100644
>>>> --- a/tools/libs/light/libxl_create.c
>>>> +++ b/tools/libs/light/libxl_create.c
>>>> @@ -632,6 +632,15 @@ int libxl__domain_make(libxl__gc *gc, 
>>>> libxl_domain_config *d_config,
>>>>        if (info->passthrough == LIBXL_PASSTHROUGH_SYNC_PT)
>>>>            create.iommu_opts |= XEN_DOMCTL_IOMMU_no_sharept;
>>>> 
>>>> +#if defined(__arm__) || defined(__aarch64__)
>>>> +        /*
>>>> +         * Enable VPCI support for ARM. VPCI support for DOMU guest is not
>>>> +         * supported for x86.
>>>> +         */
>>>> +        if ( libxl_defbool_val(b_info->arch_arm.vpci) )
>>>> +            create.flags |= XEN_DOMCTL_CDF_vpci;
>>>> +#endif
>>> 
>>> I don't think the #ifdef is required, is it? The check is based on
>>> b_info->arch_arm.vpci which is already ARM-specific and couldn't be
>>> enabled on X86. We have another similar check in libxl_create.c for
>>> d_config->b_info.arch_arm.vuart without #ifdef.
>>> 
>>> My suggestion would be to just keep the in-code comment, but leave the
>>> libxl_defbool_val check as it was before.
>>> 
>> 
>> I also thought the same way that "b_info->arch_arm.vpci|" is arm-specific 
>> but somehow it is getting enabled for x86 
>> when we assign the PCI device to DOMU guests on x86 PV DOM0 once I remove 
>> the #ifdef for below code.
>> 
>> #if defined(__arm__) || defined(__aarch64__)                   
>>    /*                                    
>>     * Enable VPCI support for ARM. VPCI support for DOMU guests is not    
>>     * supported for x86.                          
>>     */                                   
>>    if (d_config->num_pcidevs)                        
>>      libxl_defbool_set(&b_info->arch_arm.vpci, true);           
>> #endif 
>> 
>> Error on x86:
>> Parsing config from guest.cfg
>> (XEN) domain.c:667: vPCI cannot be enabled yet
>> libxl: error: libxl_create.c:683:libxl__domain_make: domain creation fail: 
>> Invalid argument
>> libxl: error: libxl_create.c:1237:initiate_domain_create: cannot make 
>> domain: -3
>> 
>> One solution is we can remove the #ifdef from the below code when checking 
>> if vpci is enabled…
>> #if defined(__arm__) || defined(__aarch64__)                   
>>    /*                                    
>>     * Enable VPCI support for ARM. VPCI support for DOMU guests is not    
>>     * supported for x86.                          
>>     */                                   
>>    if ( libxl_defbool_val(b_info->arch_arm.vpci) )             
>>      create.flags |= XEN_DOMCTL_CDF_vpci;                 
>> #endif
>> 
>> ..but not from here when setting the arch_arm.vpci when we assign the PCI 
>> device to the guest.
>> 
>> #if defined(__arm__) || defined(__aarch64__)                  
>>    /*                                    
>>     * Enable VPCI support for ARM. VPCI support for DOMU guests is not    
>>     * supported for x86.                          
>>     */                                   
>>    if (d_config->num_pcidevs)                        
>>      libxl_defbool_set(&b_info->arch_arm.vpci, true);           
>> #endif 
>> 
>> 
>> Also if I remove #ifdef as mention above I need to move the 
>>       "libxl_defbool_setdefault(&b_info->arch_arm.vpci, false); “ 
>> from 
>>       libxl__arch_domain_build_info_setdefault(..) 
>> to common code 
>>       libxl__domain_build_info_setdefault(..) to avoid error on x86.
>> 
>> Error on x86:
>> root@dom0:~# xl create -c guest.cfg
>> Parsing config from guest.cfg
>> xl: libxl.c:337: libxl_defbool_val: Assertion 
>> `!libxl_defbool_is_default(db)' failed.
>> Aborted
> 
> As far as I can tell, the #ifdef in libxl_create.c can be removed by
> doing:
> 
>        if ( libxl_defbool_val(b_info->arch_arm.vpci) > 0 )
>            create.flags |= XEN_DOMCTL_CDF_vpci;
> 
> because we need to check for LIBXL__DEFBOOL_TRUE, which is > 0, right?

Yes right we have to check  LIBXL__DEFBOOL_TRUE which is 1.

> And vpci should never be set on x86. arch_arm.vpci should be initialized
> to zero on x86 which is LIBXL__DEFBOOL_DEFAULT. That should work.

libxl_defbool_val(libxl_defbool db) is implemented in such a way that it will 
assert 
if db value is the default. Therefore we have to explicitly set it to 
LIBXL__DEFBOOL_FALSE for x86.

There are two option either we can have #ifdef or we can move the 
libxl_defbool_setdefault(&b_info->arch_arm.vpci, false) to common code.

Regards,
Rahul
> 
> 
> On the other hand you are right that the #ifdef in tools/xl/xl_parse.c
> cannot just be removed because otherwise b_info->arch_arm.vpci gets set
> on x86, which obviously we don't want.