|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [PATCH v3 3/3] arm/efi: load dom0 modules from DT using UEFI
Add support to load Dom0 boot modules from
the device tree using the uefi,binary property.
Update documentation about that.
Signed-off-by: Luca Fancellu <luca.fancellu@xxxxxxx>
---
Changes in v3:
- new patch
---
docs/misc/arm/device-tree/booting.txt | 8 ++++
docs/misc/efi.pandoc | 64 +++++++++++++++++++++++++--
xen/arch/arm/efi/efi-boot.h | 36 +++++++++++++--
xen/common/efi/boot.c | 12 ++---
4 files changed, 108 insertions(+), 12 deletions(-)
diff --git a/docs/misc/arm/device-tree/booting.txt
b/docs/misc/arm/device-tree/booting.txt
index 354bb43fe1..e73f6476d4 100644
--- a/docs/misc/arm/device-tree/booting.txt
+++ b/docs/misc/arm/device-tree/booting.txt
@@ -70,6 +70,14 @@ Each node contains the following properties:
priority of this field vs. other mechanisms of specifying the
bootargs for the kernel.
+- uefi,binary (UEFI boot only)
+
+ String property that specifies the file name to be loaded by the UEFI
+ boot for this module. If this is specified, there is no need to specify
+ the reg property because it will be created by the UEFI stub on boot.
+ This option is needed only when UEFI boot is used, the node needs to be
+ compatible with multiboot,kernel or multiboot,ramdisk.
+
Examples
========
diff --git a/docs/misc/efi.pandoc b/docs/misc/efi.pandoc
index 800e67a233..4cebc47a18 100644
--- a/docs/misc/efi.pandoc
+++ b/docs/misc/efi.pandoc
@@ -167,6 +167,28 @@ sbsign \
--output xen.signed.efi \
xen.unified.efi
```
+## UEFI boot and Dom0 modules on ARM
+
+When booting using UEFI on ARM, it is possible to specify the Dom0 modules
+directly from the device tree without using the Xen configuration file, here an
+example:
+
+chosen {
+ #size-cells = <0x1>;
+ #address-cells = <0x1>;
+ xen,xen-bootargs = "[Xen boot arguments]"
+
+ module@1 {
+ compatible = "multiboot,kernel", "multiboot,module";
+ uefi,binary = "vmlinuz-3.0.31-0.4-xen";
+ bootargs = "[domain 0 command line options]";
+ };
+
+ module@2 {
+ compatible = "multiboot,ramdisk", "multiboot,module";
+ uefi,binary = "initrd-3.0.31-0.4-xen";
+ };
+}
## UEFI boot and dom0less on ARM
@@ -326,10 +348,10 @@ chosen {
### Boot Xen, Dom0 and DomU(s)
This configuration is a mix of the two configuration above, to boot this one
-the configuration file must be processed so the /chosen node must have the
-"uefi,cfg-load" property.
+the configuration file can be processed or the Dom0 modules can be read from
+the device tree.
-Here an example:
+Here the first example:
Xen configuration file:
@@ -369,4 +391,40 @@ chosen {
};
```
+Here the second example:
+
+Device tree:
+
+```
+chosen {
+ #size-cells = <0x1>;
+ #address-cells = <0x1>;
+ xen,xen-bootargs = "[Xen boot arguments]"
+
+ module@1 {
+ compatible = "multiboot,kernel", "multiboot,module";
+ uefi,binary = "vmlinuz-3.0.31-0.4-xen";
+ bootargs = "[domain 0 command line options]";
+ };
+
+ module@2 {
+ compatible = "multiboot,ramdisk", "multiboot,module";
+ uefi,binary = "initrd-3.0.31-0.4-xen";
+ };
+
+ domU1 {
+ #size-cells = <0x1>;
+ #address-cells = <0x1>;
+ compatible = "xen,domain";
+ cpus = <0x1>;
+ memory = <0x0 0xc0000>;
+ vpl011;
+ module@1 {
+ compatible = "multiboot,kernel", "multiboot,module";
+ uefi,binary = "Image-domu1.bin";
+ bootargs = "console=ttyAMA0 root=/dev/ram0 rw";
+ };
+ };
+};
+```
diff --git a/xen/arch/arm/efi/efi-boot.h b/xen/arch/arm/efi/efi-boot.h
index 4f7c913f86..df63387136 100644
--- a/xen/arch/arm/efi/efi-boot.h
+++ b/xen/arch/arm/efi/efi-boot.h
@@ -31,8 +31,10 @@ static unsigned int __initdata modules_idx;
#define ERROR_MISSING_DT_PROPERTY (-3)
#define ERROR_RENAME_MODULE_NAME (-4)
#define ERROR_SET_REG_PROPERTY (-5)
+#define ERROR_DOM0_ALREADY_FOUND (-6)
#define ERROR_DT_MODULE_DOMU (-1)
#define ERROR_DT_CHOSEN_NODE (-2)
+#define ERROR_DT_MODULE_DOM0 (-3)
void noreturn efi_xen_start(void *fdt_ptr, uint32_t fdt_size);
void __flush_dcache_area(const void *vaddr, unsigned long size);
@@ -45,7 +47,8 @@ static int allocate_module_file(EFI_FILE_HANDLE dir_handle,
static int handle_module_node(EFI_FILE_HANDLE dir_handle,
int module_node_offset,
int reg_addr_cells,
- int reg_size_cells);
+ int reg_size_cells,
+ bool is_domu_module);
static bool is_boot_module(int dt_module_offset);
static int handle_dom0less_domain_node(EFI_FILE_HANDLE dir_handle,
int domain_node);
@@ -701,7 +704,8 @@ static int __init allocate_module_file(EFI_FILE_HANDLE
dir_handle,
static int __init handle_module_node(EFI_FILE_HANDLE dir_handle,
int module_node_offset,
int reg_addr_cells,
- int reg_size_cells)
+ int reg_size_cells,
+ bool is_domu_module)
{
const void *uefi_name_prop;
char mod_string[24]; /* Placeholder for module@ + a 64-bit number + \0 */
@@ -743,6 +747,24 @@ static int __init handle_module_node(EFI_FILE_HANDLE
dir_handle,
return ERROR_SET_REG_PROPERTY;
}
+ if ( !is_domu_module &&
+ (fdt_node_check_compatible(fdt, module_node_offset,
+ "multiboot,kernel") == 0) )
+ {
+ /*
+ * This is the Dom0 kernel, wire it to the kernel variable because it
+ * will be verified by the shim lock protocol later in the common code.
+ */
+ if ( kernel.addr )
+ {
+ PrintMessage(L"Dom0 kernel already found in cfg file.");
+ return ERROR_DOM0_ALREADY_FOUND;
+ }
+ kernel.need_to_free = false; /* Freed using the module array */
+ kernel.addr = file->addr;
+ kernel.size = file->size;
+ }
+
return 0;
}
@@ -799,7 +821,7 @@ static int __init
handle_dom0less_domain_node(EFI_FILE_HANDLE dir_handle,
if ( is_boot_module(module_node) )
{
int ret = handle_module_node(dir_handle, module_node, addr_cells,
- size_cells);
+ size_cells, true);
if ( ret < 0 )
return ret;
}
@@ -809,7 +831,7 @@ static int __init
handle_dom0less_domain_node(EFI_FILE_HANDLE dir_handle,
/*
* This function checks for xen domain nodes under the /chosen node for
possible
- * domU guests to be loaded.
+ * dom0 and domU guests to be loaded.
* Returns the number of modules loaded or a negative number for error.
*/
static int __init efi_arch_check_dt_boot(EFI_FILE_HANDLE dir_handle)
@@ -836,6 +858,12 @@ static int __init efi_arch_check_dt_boot(EFI_FILE_HANDLE
dir_handle)
if ( handle_dom0less_domain_node(dir_handle, node) < 0 )
return ERROR_DT_MODULE_DOMU;
}
+ else if ( is_boot_module(node) )
+ {
+ if ( handle_module_node(dir_handle, node, addr_len, size_len,
+ false) < 0 )
+ return ERROR_DT_MODULE_DOM0;
+ }
}
/* Free dom0less file names if any */
diff --git a/xen/common/efi/boot.c b/xen/common/efi/boot.c
index c8c57fbb54..b221494a06 100644
--- a/xen/common/efi/boot.c
+++ b/xen/common/efi/boot.c
@@ -1296,11 +1296,6 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE
*SystemTable)
{
read_file(dir_handle, s2w(&name), &kernel, option_str);
efi_bs->FreePool(name.w);
-
- if ( !EFI_ERROR(efi_bs->LocateProtocol(&shim_lock_guid, NULL,
- (void **)&shim_lock)) &&
- (status = shim_lock->Verify(kernel.ptr, kernel.size)) !=
EFI_SUCCESS )
- PrintErrMesg(L"Dom0 kernel image could not be verified",
status);
}
if ( !read_section(loaded_image, L"ramdisk", &ramdisk, NULL) )
@@ -1372,6 +1367,13 @@ efi_start(EFI_HANDLE ImageHandle, EFI_SYSTEM_TABLE
*SystemTable)
if (dt_module_found < 0)
/* efi_arch_check_dt_boot throws some error */
blexit(L"Error processing boot modules on DT.");
+
+ /* If Dom0 is specified, verify it */
+ if ( kernel.ptr &&
+ !EFI_ERROR(efi_bs->LocateProtocol(&shim_lock_guid, NULL,
+ (void **)&shim_lock)) &&
+ (status = shim_lock->Verify(kernel.ptr, kernel.size)) != EFI_SUCCESS )
+ PrintErrMesg(L"Dom0 kernel image could not be verified", status);
/*
* Check if a proper configuration is provided to start Xen:
* - Dom0 specified (minimum required)
--
2.17.1
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |