|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [PATCH 08/11] libxl: Only map legacy PCI IRQs if they are supported
On Fri, 3 Sep 2021, Oleksandr Andrushchenko wrote:
> From: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
>
> Arm's PCI passthrough implementation doesn't support legacy interrupts,
> but MSI/MSI-X. This can be the case for other platforms too.
> For that reason introduce a new CONFIG_PCI_SUPP_LEGACY_IRQ and add
> it to the CFLAGS and compile the relevant code in the toolstack only if
> applicable.
>
> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@xxxxxxxx>
> Cc: Ian Jackson <iwj@xxxxxxxxxxxxxx>
> Cc: Juergen Gross <jgross@xxxxxxxx>
> ---
> tools/libs/light/Makefile | 4 ++++
> tools/libs/light/libxl_pci.c | 13 +++++++++++++
> 2 files changed, 17 insertions(+)
>
> diff --git a/tools/libs/light/Makefile b/tools/libs/light/Makefile
> index 7d8c51d49242..bd3f6be2a183 100644
> --- a/tools/libs/light/Makefile
> +++ b/tools/libs/light/Makefile
> @@ -46,6 +46,10 @@ CFLAGS += -Wno-format-zero-length -Wmissing-declarations \
> -Wno-declaration-after-statement -Wformat-nonliteral
> CFLAGS += -I.
>
> +ifeq ($(CONFIG_X86),y)
> +CFLAGS += -DCONFIG_PCI_SUPP_LEGACY_IRQ
> +endif
> +
> SRCS-$(CONFIG_X86) += libxl_cpuid.c
> SRCS-$(CONFIG_X86) += libxl_x86.c
> SRCS-$(CONFIG_X86) += libxl_psr.c
> diff --git a/tools/libs/light/libxl_pci.c b/tools/libs/light/libxl_pci.c
> index 59f3686fc85e..cd4fea46c3f7 100644
> --- a/tools/libs/light/libxl_pci.c
> +++ b/tools/libs/light/libxl_pci.c
> @@ -1434,6 +1434,7 @@ static void pci_add_dm_done(libxl__egc *egc,
> }
> }
> fclose(f);
> +#ifndef CONFIG_PCI_SUPP_LEGACY_IRQ
As Juergen pointed out the logic is inverted.
I also think we need to come up with a better way to handle this #ifdef
logic in this file.
For instance, could we let this function try to open sysfs_path? I
imagine it would fail, right? If so, we could just have an #ifdef inside
the failure check.
Alternatively, could we have a small #ifdef right here doing:
#ifndef CONFIG_PCI_SUPP_LEGACY_IRQ
goto out_no_irq;
#endif
?
Even better, would be to introduce a static inline as follows:
static inline bool pci_supp_legacy_irq(void)
{
#ifndef CONFIG_PCI_SUPP_LEGACY_IRQ
return false;
#else
return true;
#endif
}
Then in libxl_pci.c you can avoid all ifdefs:
if (!pci_supp_legacy_irq()))
goto out_no_irq;
> sysfs_path = GCSPRINTF(SYSFS_PCI_DEV"/"PCI_BDF"/irq", pci->domain,
> pci->bus, pci->dev, pci->func);
> f = fopen(sysfs_path, "r");
> @@ -1460,6 +1461,7 @@ static void pci_add_dm_done(libxl__egc *egc,
> }
> }
> fclose(f);
> +#endif
>
> /* Don't restrict writes to the PCI config space from this VM */
> if (pci->permissive) {
> @@ -1471,7 +1473,9 @@ static void pci_add_dm_done(libxl__egc *egc,
> }
> }
>
> +#ifndef CONFIG_PCI_SUPP_LEGACY_IRQ
> out_no_irq:
> +#endif
> if (!isstubdom) {
> if (pci->rdm_policy == LIBXL_RDM_RESERVE_POLICY_STRICT) {
> flag &= ~XEN_DOMCTL_DEV_RDM_RELAXED;
> @@ -1951,7 +1955,9 @@ static void do_pci_remove(libxl__egc *egc,
> pci_remove_state *prs)
> pci->bus, pci->dev, pci->func);
> FILE *f = fopen(sysfs_path, "r");
> unsigned int start = 0, end = 0, flags = 0, size = 0;
> +#ifndef CONFIG_PCI_SUPP_LEGACY_IRQ
> int irq = 0;
> +#endif
I'd let this compile if possible.
> int i;
> if (f == NULL) {
> @@ -1983,6 +1989,7 @@ static void do_pci_remove(libxl__egc *egc,
> pci_remove_state *prs)
> }
> fclose(f);
> skip1:
> +#ifndef CONFIG_PCI_SUPP_LEGACY_IRQ
Here we could do instead:
if (!pci_supp_legacy_irq()))
goto skip_irq;
> sysfs_path = GCSPRINTF(SYSFS_PCI_DEV"/"PCI_BDF"/irq", pci->domain,
> pci->bus, pci->dev, pci->func);
> f = fopen(sysfs_path, "r");
> @@ -2001,8 +2008,14 @@ skip1:
> }
> }
> fclose(f);
> +#else
> + /* Silence error: label at end of compound statement */
> + ;
> +#endif
> }
> +#ifndef CONFIG_PCI_SUPP_LEGACY_IRQ
> skip_irq:
> +#endif
> rc = 0;
> out_fail:
> pci_remove_detached(egc, prs, rc); /* must be last */
> --
> 2.25.1
>
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |