Re: [PATCH V1 12/16] xen/dm: Introduce xendevicemodel_set_irq_level DM op

[Julien Grall <julien@xxxxxxx>]

(+ Paul and Andre)

Hi,

Adding Paul as the author of DMOP and Andre as this is GIC related.

On 10/09/2020 21:22, Oleksandr Tyshchenko wrote:
> From: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>
Looking at the PoC I shared with you, this code was originally written 
by me.
> This patch adds ability to the device emulator to notify otherend
> (some entity running in the guest) using a SPI and implements Arm
> specific bits for it. Proposed interface allows emulator to set
> the logical level of a one of a domain's IRQ lines.
It would be good to explain in the commit message why we can't use the 
existing DMOP to inject an interrupt.
> Signed-off-by: Julien Grall <julien.grall@xxxxxxx>
> Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@xxxxxxxx>
>
> ---
> Please note, this is a split/cleanup/hardening of Julien's PoC:
> "Add support for Guest IO forwarding to a device emulator"
>
> Please note, I left interface untouched since there is still
> an open discussion what interface to use/what information to pass
> to the hypervisor. The question whether we should abstract away
> the state of the line or not.
>
> Changes RFC -> V1:
>     - check incoming parameters in arch_dm_op()
>     - add explicit padding to struct xen_dm_op_set_irq_level
> ---
> ---
>   tools/libs/devicemodel/core.c                   | 18 +++++++++++++
>   tools/libs/devicemodel/include/xendevicemodel.h |  4 +++
>   tools/libs/devicemodel/libxendevicemodel.map    |  1 +
>   xen/arch/arm/dm.c                               | 36 ++++++++++++++++++++++++-
>   xen/common/dm.c                                 |  1 +
>   xen/include/public/hvm/dm_op.h                  | 15 +++++++++++
>   6 files changed, 74 insertions(+), 1 deletion(-)
>
> diff --git a/tools/libs/devicemodel/core.c b/tools/libs/devicemodel/core.c
> index 4d40639..30bd79f 100644
> --- a/tools/libs/devicemodel/core.c
> +++ b/tools/libs/devicemodel/core.c
> @@ -430,6 +430,24 @@ int xendevicemodel_set_isa_irq_level(
>       return xendevicemodel_op(dmod, domid, 1, &op, sizeof(op));
>   }
>   
> +int xendevicemodel_set_irq_level(
> +    xendevicemodel_handle *dmod, domid_t domid, uint32_t irq,
> +    unsigned int level)
> +{
> +    struct xen_dm_op op;
> +    struct xen_dm_op_set_irq_level *data;
> +
> +    memset(&op, 0, sizeof(op));
> +
> +    op.op = XEN_DMOP_set_irq_level;
> +    data = &op.u.set_irq_level;
> +
> +    data->irq = irq;
> +    data->level = level;
> +
> +    return xendevicemodel_op(dmod, domid, 1, &op, sizeof(op));
> +}
> +
>   int xendevicemodel_set_pci_link_route(
>       xendevicemodel_handle *dmod, domid_t domid, uint8_t link, uint8_t irq)
>   {
> diff --git a/tools/libs/devicemodel/include/xendevicemodel.h 
> b/tools/libs/devicemodel/include/xendevicemodel.h
> index e877f5c..c06b3c8 100644
> --- a/tools/libs/devicemodel/include/xendevicemodel.h
> +++ b/tools/libs/devicemodel/include/xendevicemodel.h
> @@ -209,6 +209,10 @@ int xendevicemodel_set_isa_irq_level(
>       xendevicemodel_handle *dmod, domid_t domid, uint8_t irq,
>       unsigned int level);
>   
> +int xendevicemodel_set_irq_level(
> +    xendevicemodel_handle *dmod, domid_t domid, unsigned int irq,
> +    unsigned int level);
> +
>   /**
>    * This function maps a PCI INTx line to a an IRQ line.
>    *
> diff --git a/tools/libs/devicemodel/libxendevicemodel.map 
> b/tools/libs/devicemodel/libxendevicemodel.map
> index 561c62d..a0c3012 100644
> --- a/tools/libs/devicemodel/libxendevicemodel.map
> +++ b/tools/libs/devicemodel/libxendevicemodel.map
> @@ -32,6 +32,7 @@ VERS_1.2 {
>         global:
>                 xendevicemodel_relocate_memory;
>                 xendevicemodel_pin_memory_cacheattr;
> +               xendevicemodel_set_irq_level;
>   } VERS_1.1;
>   
>   VERS_1.3 {
> diff --git a/xen/arch/arm/dm.c b/xen/arch/arm/dm.c
> index eb20344..428ef98 100644
> --- a/xen/arch/arm/dm.c
> +++ b/xen/arch/arm/dm.c
> @@ -15,11 +15,45 @@
>    */
>   
>   #include <xen/hypercall.h>
NIT: newline between <xen/*> and <asm/*> includes.

> +#include <asm/vgic.h>
>   
>   int arch_dm_op(struct xen_dm_op *op, struct domain *d,
>                  const struct dmop_args *op_args, bool *const_op)
>   {
> -    return -EOPNOTSUPP;
> +    int rc;
> +
> +    switch ( op->op )
> +    {
> +    case XEN_DMOP_set_irq_level:
> +    {
> +        const struct xen_dm_op_set_irq_level *data =
> +            &op->u.set_irq_level;
> +
> +        /* Only SPIs are supported */
> +        if ( (data->irq < NR_LOCAL_IRQS) || (data->irq >= vgic_num_irqs(d)) )
> +        {
> +            rc = -EINVAL;
> +            break;
> +        }
> +
> +        if ( data->level != 0 && data->level != 1 )
> +        {
> +            rc = -EINVAL;
> +            break;
> +        }
> +
I think we want to check the padding is always 0.

> +
> +        vgic_inject_irq(d, NULL, data->irq, data->level);
So, this interface will allow the device emulator to raise/lower the 
line for an HW mapped interrupt. I think this will mess up with the 
internal state machine.
It would probably be better if a device emulator can only raise/lower 
the line for non-allocated interrupts (see d->arch.vgic.allocated_irqs). 
Any thoughts?
> +        rc = 0;
> +        break;
> +    }
> +
> +    default:
> +        rc = -EOPNOTSUPP;
> +        break;
> +    }
> +
> +    return rc;
>   }
>   
>   /*
> diff --git a/xen/common/dm.c b/xen/common/dm.c
> index 060731d..c55e042 100644
> --- a/xen/common/dm.c
> +++ b/xen/common/dm.c
> @@ -47,6 +47,7 @@ static int dm_op(const struct dmop_args *op_args)
>           [XEN_DMOP_remote_shutdown]                  = sizeof(struct 
> xen_dm_op_remote_shutdown),
>           [XEN_DMOP_relocate_memory]                  = sizeof(struct 
> xen_dm_op_relocate_memory),
>           [XEN_DMOP_pin_memory_cacheattr]             = sizeof(struct 
> xen_dm_op_pin_memory_cacheattr),
> +        [XEN_DMOP_set_irq_level]                    = sizeof(struct 
> xen_dm_op_set_irq_level),
>       };
>   
>       rc = rcu_lock_remote_domain_by_id(op_args->domid, &d);
> diff --git a/xen/include/public/hvm/dm_op.h b/xen/include/public/hvm/dm_op.h
> index fd00e9d..39567bf 100644
> --- a/xen/include/public/hvm/dm_op.h
> +++ b/xen/include/public/hvm/dm_op.h
> @@ -417,6 +417,20 @@ struct xen_dm_op_pin_memory_cacheattr {
>       uint32_t pad;
>   };
>   
> +/*
> + * XEN_DMOP_set_irq_level: Set the logical level of a one of a domain's
> + *                         IRQ lines.
> + * XXX Handle PPIs.
This is a public interface, so it seems a bit strange to leave a TODO in 
this code.
I wouldn't be surprised if someone will want PPI support soon, but we 
may be able to defer it if we can easily extend the hypercall.
@Paul, how did you envision to extend DMOP?

Also, is there any plan to add x86 support? If not, then I think we want 
to document in the interface that this is Arm only.
> + */
> +#define XEN_DMOP_set_irq_level 19
> +
> +struct xen_dm_op_set_irq_level {
> +    uint32_t irq;
> +    /* IN - Level: 0 -> deasserted, 1 -> asserted */
> +    uint8_t level;
> +    uint8_t pad[3];
> +};
> +
>   struct xen_dm_op {
>       uint32_t op;
>       uint32_t pad;
> @@ -430,6 +444,7 @@ struct xen_dm_op {
>           struct xen_dm_op_track_dirty_vram track_dirty_vram;
>           struct xen_dm_op_set_pci_intx_level set_pci_intx_level;
>           struct xen_dm_op_set_isa_irq_level set_isa_irq_level;
> +        struct xen_dm_op_set_irq_level set_irq_level;
>           struct xen_dm_op_set_pci_link_route set_pci_link_route;
>           struct xen_dm_op_modified_memory modified_memory;
>           struct xen_dm_op_set_mem_type set_mem_type;
Cheers,

--
Julien Grall