[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH 1/3] docs etc.: https: Fix references to wiki.xen[project.org



Hi Ian,

Title: Did you intend to use {,project} rather than [project?

Cheers,

On 30/03/2020 14:57, Ian Jackson wrote:
Change the url scheme to https.  This is all in-tree references to the
Xen wiki.

Signed-off-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
---
  README                            | 16 ++++++++--------
  config/Paths.mk.in                |  2 +-
  docs/README.colo                  |  2 +-
  docs/README.remus                 |  2 +-
  docs/misc/stubdom.txt             |  2 +-
  docs/misc/vtd.txt                 |  2 +-
  docs/misc/xen-command-line.pandoc |  2 +-
  docs/misc/xenstore.txt            |  2 +-
  tools/libxl/libxlu_cfg.c          |  2 +-
  9 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/README b/README
index 92b1de9938..712d05d69d 100644
--- a/README
+++ b/README
@@ -21,15 +21,15 @@ development community, spearheaded by xen.org 
(http://www.xen.org).
This file contains some quick-start instructions to install Xen on
  your system. For more information see http:/www.xen.org/ and
-http://wiki.xen.org/
+https://wiki.xen.org/
Quick-Start Guide
  =================
First, this is just a quick-start guide. For more comprehensive
  information see the INSTALL file and the Xen wiki at
-http://wiki.xenproject.org and in particular
-http://wiki.xenproject.org/wiki/Getting_Started.
+https://wiki.xenproject.org and in particular
+https://wiki.xenproject.org/wiki/Getting_Started.
Second, there are a number of prerequisites for building a Xen source
  release. Make sure you have all the following installed, either by
@@ -88,10 +88,10 @@ disabled at compile time:
  Second, you need to acquire a suitable kernel for use in domain 0. If
  possible you should use a kernel provided by your OS distributor. If
  no suitable kernel is available from your OS distributor then refer to
-http://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
+https://wiki.xen.org/wiki/XenDom0Kernels for suggestions for
  suitable kernels to use.
  If you are looking to compile a Dom0 kernel from source, please refer to
-http://wiki.xen.org/wiki/XenParavirtOps.
+https://wiki.xen.org/wiki/XenParavirtOps.
[NB. Unless noted otherwise, all the following steps should be
  performed with root privileges.]
@@ -168,9 +168,9 @@ You can change the preferred xenstored you want to use in 
the configuration
  but since we cannot stop the daemon a reboot will be required to make the
  change take effect.
-[0] http://wiki.xen.org/wiki/XenStore
-[1] http://wiki.xen.org/wiki/XenStoreReference
-[2] http://wiki.xen.org/wiki/Xenstored
+[0] https://wiki.xen.org/wiki/XenStore
+[1] https://wiki.xen.org/wiki/XenStoreReference
+[2] https://wiki.xen.org/wiki/Xenstored
Python Runtime Libraries
  ========================
diff --git a/config/Paths.mk.in b/config/Paths.mk.in
index dc9d0c0353..416fc7aab9 100644
--- a/config/Paths.mk.in
+++ b/config/Paths.mk.in
@@ -10,7 +10,7 @@
  #
  # For more documentation you can refer to the wiki:
  #
-# 
http://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
+# 
https://wiki.xen.org/wiki/Category:Host_Configuration#System_wide_xen_configuration
PACKAGE_TARNAME := @PACKAGE_TARNAME@
  prefix                   := @prefix@
diff --git a/docs/README.colo b/docs/README.colo
index 466eb72152..acb4ee5a0a 100644
--- a/docs/README.colo
+++ b/docs/README.colo
@@ -5,5 +5,5 @@ response in parallel too. If the response packets from PVM and 
SVM are
  identical, they are released immediately. Otherwise, a VM checkpoint (on 
demand)
  is conducted.
-See the website at http://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
+See the website at https://wiki.xen.org/wiki/COLO_-_Coarse_Grain_Lock_Stepping
  for details.
diff --git a/docs/README.remus b/docs/README.remus
index 20783c93da..e41e045a10 100644
--- a/docs/README.remus
+++ b/docs/README.remus
@@ -1,7 +1,7 @@
  Remus provides fault tolerance for virtual machines by sending continuous
  checkpoints to a backup, which will activate if the target VM fails.
-See the website at http://wiki.xen.org/wiki/Remus for details.
+See the website at https://wiki.xen.org/wiki/Remus for details.
Using Remus with libxl on Xen 4.5 and higher:
   To enable network buffering, you need libnl 3.2.8
diff --git a/docs/misc/stubdom.txt b/docs/misc/stubdom.txt
index de7b6c7d96..882a18cab4 100644
--- a/docs/misc/stubdom.txt
+++ b/docs/misc/stubdom.txt
@@ -19,7 +19,7 @@ config:
      device_model_stubdomain_override = 1
See xl.cfg(5) for more details of the xl domain configuration syntax
-and http://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
+and https://wiki.xen.org/wiki/Device_Model_Stub_Domains for more
  information on device model stub domains
diff --git a/docs/misc/vtd.txt b/docs/misc/vtd.txt
index 88b2102e3e..89076a0776 100644
--- a/docs/misc/vtd.txt
+++ b/docs/misc/vtd.txt
@@ -208,7 +208,7 @@ 
http://www.dell.com/content/products/category.aspx/optix?c=us&cs=555&l=en&s=biz
  - HP Compaq:  DC7800
  
http://h10010.www1.hp.com/wwpc/us/en/en/WF04a/12454-12454-64287-321860-3328898.html
-For more information, pls refer to http://wiki.xen.org/wiki/VTdHowTo.
+For more information, pls refer to https://wiki.xen.org/wiki/VTdHowTo.
Assigning devices to HVM domains
diff --git a/docs/misc/xen-command-line.pandoc 
b/docs/misc/xen-command-line.pandoc
index 02432bdb25..6ff317d15d 100644
--- a/docs/misc/xen-command-line.pandoc
+++ b/docs/misc/xen-command-line.pandoc
@@ -843,7 +843,7 @@ So `<sz>` being `1G+25%` on a 256 GB host would result in 
65 GB.
  If you use this option then it is highly recommended that you disable
  any dom0 autoballooning feature present in your toolstack. See the
  _xl.conf(5)_ man page or [Xen Best
-Practices](http://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
+Practices](https://wiki.xen.org/wiki/Xen_Best_Practices#Xen_dom0_dedicated_memory_and_preventing_dom0_memory_ballooning).
This option doesn't have effect if pv-shim mode is enabled. diff --git a/docs/misc/xenstore.txt b/docs/misc/xenstore.txt
index 7f2b388dd5..04ce0ba607 100644
--- a/docs/misc/xenstore.txt
+++ b/docs/misc/xenstore.txt
@@ -168,7 +168,7 @@ SET_PERMS           <path>|<perm-as-string>|+?
                r<domid>  read only
                b<domid>  both read and write
                n<domid>  no access
-       See http://wiki.xen.org/wiki/XenBus section
+       See https://wiki.xen.org/wiki/XenBus section
        `Permissions' for details of the permissions system.
---------- Watches ----------
diff --git a/tools/libxl/libxlu_cfg.c b/tools/libxl/libxlu_cfg.c
index cafc632fc1..f9e8aa2f3a 100644
--- a/tools/libxl/libxlu_cfg.c
+++ b/tools/libxl/libxlu_cfg.c
@@ -74,7 +74,7 @@ static void parse(CfgParseContext *ctx) {
          fputs(
   "warning: Config file looks like it contains Python code.\n"
   "warning:  Arbitrary Python is no longer supported.\n"
- "warning:  See http://wiki.xen.org/wiki/PythonInXlConfig\n";,
+ "warning:  See https://wiki.xen.org/wiki/PythonInXlConfig\n";,
                ctx->cfg->report);
      }
  }


--
Julien Grall



 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.