Xen project Mailing List

[Xen-devel] [XEN PATCH v3 1/2] xen/arm: Rename all early printk macro

From: Anthony PERARD <anthony.perard@xxxxxxxxxx>

Date: Mon, 9 Mar 2020 17:45:04 +0000

Authentication-results: esa3.hc3370-68.iphmx.com; dkim=none (message not signed) header.i=none; spf=None smtp.pra=anthony.perard@xxxxxxxxxx; spf=Pass smtp.mailfrom=anthony.perard@xxxxxxxxxx; spf=None smtp.helo=postmaster@xxxxxxxxxxxxxxx

Cc: Anthony PERARD <anthony.perard@xxxxxxxxxx>, Volodymyr Babchuk <Volodymyr_Babchuk@xxxxxxxx>, Stefano Stabellini <sstabellini@xxxxxxxxxx>, Julien Grall <julien@xxxxxxx>

Delivery-date: Mon, 09 Mar 2020 17:45:24 +0000

Ironport-sdr: V/kb3rb2xrDCMG+4mQ1oQ4sJ0Ft1C89ROkYW6vd4Ci5o5q8mYV+0FtRq83qNnmlq0JCmXbwF+Z FdsiA/9JgB9D22c/20Fd6N+k5M3GzNd9n+paD8QHonB6DB7wH58QD5EHenVMXqp4514viJX8hi ZA9+EMCu37d1RYpcH64R5izQ+zmptYrGrY31w1pMRSKeTICPVFj+UHFby3IXYI+lTJFhDeKsLM lcWls+9Vgksvp40EGFZBOOBbw0phJVyCZ30EoPiyaV3SVwSlFVvZPh7/wOEwRa7BMOhbrJbdGs 48Y=

List-id: Xen developer discussion <xen-devel.lists.xenproject.org>

We are going to move the generation of the early printk macro into Kconfig. This means all macro will be prefix with CONFIG_. We do that ahead of the change. We also take the opportunity to better name some variables, which are used by only one driver and wouldn't make sens for other UART driver. Thus, - EARLY_UART_REG_SHIFT became CONFIG_EARLY_UART_8250_REG_SHIFT - EARLY_PRINTK_VERSION_* became CONFIG_EARLY_UART_SCIF_VERSION_* The other variables are change to have the prefix CONFIG_EARLY_UART_ when they change a parameter of the driver. So we have now: - CONFIG_EARLY_UART_BAUD_RATE - CONFIG_EARLY_UART_BASE_ADDRESS - CONFIG_EARLY_UART_INIT Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx> --- That's based on early work by Julien [PATCH for-4.13] xen/arm: Add Skeleton for using configuring early printk using Kconfig <20190913103953.8182-1-julien.grall@xxxxxxx> --- Notes: v3: - Revert the renaming of EARLY_PRINTK to CONFIG_EARLY_PRINTK in the makefiles, as this doesn't work well with user provided CONFIG_EARLY_PRINTK. This is done in the following patch instead. - rename CONFIG_EARLY_UART_BAUD_RATE to CONFIG_EARLY_UART_PL011_BAUD_RATE xen/arch/arm/Rules.mk | 14 +++++++------- xen/arch/arm/arm32/debug-8250.inc | 2 +- xen/arch/arm/arm32/debug-pl011.inc | 4 ++-- xen/arch/arm/arm32/debug-scif.inc | 4 ++-- xen/arch/arm/arm32/debug.S | 4 ++-- xen/arch/arm/arm32/head.S | 10 +++++----- xen/arch/arm/arm64/debug-8250.inc | 4 ++-- xen/arch/arm/arm64/debug-pl011.inc | 4 ++-- xen/arch/arm/arm64/debug.S | 4 ++-- xen/arch/arm/arm64/head.S | 10 +++++----- xen/include/asm-arm/early_printk.h | 2 +- 11 files changed, 31 insertions(+), 31 deletions(-) diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk index 022a3a6f82ba..faa09ea111ec 100644 --- a/xen/arch/arm/Rules.mk +++ b/xen/arch/arm/Rules.mk @@ -66,9 +66,9 @@ endif endif ifeq ($(EARLY_PRINTK_INC),scif) ifneq ($(word 3,$(EARLY_PRINTK_CFG)),) -CFLAGS-y += -DEARLY_PRINTK_VERSION_$(word 3,$(EARLY_PRINTK_CFG)) +CFLAGS-y += -DCONFIG_EARLY_UART_SCIF_VERSION_$(word 3,$(EARLY_PRINTK_CFG)) else -CFLAGS-y += -DEARLY_PRINTK_VERSION_NONE +CFLAGS-y += -DCONFIG_EARLY_UART_SCIF_VERSION_NONE endif endif @@ -77,11 +77,11 @@ EARLY_PRINTK := y endif CFLAGS-$(EARLY_PRINTK) += -DCONFIG_EARLY_PRINTK -CFLAGS-$(EARLY_PRINTK_INIT_UART) += -DEARLY_PRINTK_INIT_UART -CFLAGS-$(EARLY_PRINTK) += -DEARLY_PRINTK_INC=\"debug-$(EARLY_PRINTK_INC).inc\" -CFLAGS-$(EARLY_PRINTK) += -DEARLY_PRINTK_BAUD=$(EARLY_PRINTK_BAUD) -CFLAGS-$(EARLY_PRINTK) += -DEARLY_UART_BASE_ADDRESS=$(EARLY_UART_BASE_ADDRESS) -CFLAGS-$(EARLY_PRINTK) += -DEARLY_UART_REG_SHIFT=$(EARLY_UART_REG_SHIFT) +CFLAGS-$(EARLY_PRINTK_INIT_UART) += -DCONFIG_EARLY_UART_INIT +CFLAGS-$(EARLY_PRINTK) += -DCONFIG_EARLY_PRINTK_INC=\"debug-$(EARLY_PRINTK_INC).inc\" +CFLAGS-$(EARLY_PRINTK) += -DCONFIG_EARLY_UART_PL011_BAUD_RATE=$(EARLY_PRINTK_BAUD) +CFLAGS-$(EARLY_PRINTK) += -DCONFIG_EARLY_UART_BASE_ADDRESS=$(EARLY_UART_BASE_ADDRESS) +CFLAGS-$(EARLY_PRINTK) += -DCONFIG_EARLY_UART_8250_REG_SHIFT=$(EARLY_UART_REG_SHIFT) else # !CONFIG_DEBUG diff --git a/xen/arch/arm/arm32/debug-8250.inc b/xen/arch/arm/arm32/debug-8250.inc index 0759a27ee157..c47e8be4aaf3 100644 --- a/xen/arch/arm/arm32/debug-8250.inc +++ b/xen/arch/arm/arm32/debug-8250.inc @@ -23,7 +23,7 @@ */ .macro early_uart_ready rb rc 1: - ldr \rc, [\rb, #(UART_LSR << EARLY_UART_REG_SHIFT)] /* Read LSR */ + ldr \rc, [\rb, #(UART_LSR << CONFIG_EARLY_UART_8250_REG_SHIFT)] /* Read LSR */ tst \rc, #UART_LSR_THRE /* Check Xmit holding register flag */ beq 1b /* Wait for the UART to be ready */ .endm diff --git a/xen/arch/arm/arm32/debug-pl011.inc b/xen/arch/arm/arm32/debug-pl011.inc index ec462eabab5c..214f68dc95bd 100644 --- a/xen/arch/arm/arm32/debug-pl011.inc +++ b/xen/arch/arm/arm32/debug-pl011.inc @@ -25,9 +25,9 @@ * rd: scratch register 2 (unused here) */ .macro early_uart_init rb, rc, rd - mov \rc, #(7372800 / EARLY_PRINTK_BAUD % 16) + mov \rc, #(7372800 / CONFIG_EARLY_UART_PL011_BAUD_RATE % 16) str \rc, [\rb, #FBRD] /* -> UARTFBRD (Baud divisor fraction) */ - mov \rc, #(7372800 / EARLY_PRINTK_BAUD / 16) + mov \rc, #(7372800 / CONFIG_EARLY_UART_PL011_BAUD_RATE / 16) str \rc, [\rb, #IBRD] /* -> UARTIBRD (Baud divisor integer) */ mov \rc, #0x60 /* 8n1 */ str \rc, [\rb, #LCR_H] /* -> UARTLCR_H (Line control) */ diff --git a/xen/arch/arm/arm32/debug-scif.inc b/xen/arch/arm/arm32/debug-scif.inc index 3f01c909c238..b2b82501e792 100644 --- a/xen/arch/arm/arm32/debug-scif.inc +++ b/xen/arch/arm/arm32/debug-scif.inc @@ -19,10 +19,10 @@ #include <asm/scif-uart.h> -#ifdef EARLY_PRINTK_VERSION_NONE +#ifdef CONFIG_EARLY_UART_SCIF_VERSION_NONE #define STATUS_REG SCIF_SCFSR #define TX_FIFO_REG SCIF_SCFTDR -#elif EARLY_PRINTK_VERSION_A +#elif CONFIG_EARLY_UART_SCIF_VERSION_A #define STATUS_REG SCIFA_SCASSR #define TX_FIFO_REG SCIFA_SCAFTDR #endif diff --git a/xen/arch/arm/arm32/debug.S b/xen/arch/arm/arm32/debug.S index 1829b29915e0..e77c76d0debc 100644 --- a/xen/arch/arm/arm32/debug.S +++ b/xen/arch/arm/arm32/debug.S @@ -19,8 +19,8 @@ #include <asm/early_printk.h> -#ifdef EARLY_PRINTK_INC -#include EARLY_PRINTK_INC +#if defined (CONFIG_EARLY_PRINTK_INC) +#include CONFIG_EARLY_PRINTK_INC #endif /* diff --git a/xen/arch/arm/arm32/head.S b/xen/arch/arm/arm32/head.S index e9d356f05c2b..2b593c5ef99a 100644 --- a/xen/arch/arm/arm32/head.S +++ b/xen/arch/arm/arm32/head.S @@ -36,8 +36,8 @@ #define XEN_FIRST_SLOT first_table_offset(XEN_VIRT_START) #define XEN_SECOND_SLOT second_table_offset(XEN_VIRT_START) -#if (defined (CONFIG_EARLY_PRINTK)) && (defined (EARLY_PRINTK_INC)) -#include EARLY_PRINTK_INC +#if (defined (CONFIG_EARLY_PRINTK)) && (defined (CONFIG_EARLY_PRINTK_INC)) +#include CONFIG_EARLY_PRINTK_INC #endif /* @@ -223,7 +223,7 @@ GLOBAL(init_secondary) 1: #ifdef CONFIG_EARLY_PRINTK - mov_w r11, EARLY_UART_BASE_ADDRESS /* r11 := UART base address */ + mov_w r11, CONFIG_EARLY_UART_BASE_ADDRESS /* r11 := UART base address */ PRINT("- CPU ") print_reg r7 PRINT(" booting -\r\n") @@ -706,8 +706,8 @@ ENTRY(switch_ttbr) * Clobbers r0 - r3 */ init_uart: - mov_w r11, EARLY_UART_BASE_ADDRESS -#ifdef EARLY_PRINTK_INIT_UART + mov_w r11, CONFIG_EARLY_UART_BASE_ADDRESS +#ifdef CONFIG_EARLY_UART_INIT early_uart_init r11, r1, r2 #endif PRINT("- UART enabled -\r\n") diff --git a/xen/arch/arm/arm64/debug-8250.inc b/xen/arch/arm/arm64/debug-8250.inc index 53d6828bfafe..30ea13077e22 100644 --- a/xen/arch/arm/arm64/debug-8250.inc +++ b/xen/arch/arm/arm64/debug-8250.inc @@ -25,7 +25,7 @@ */ .macro early_uart_ready xb c 1: - ldrb w\c, [\xb, #UART_LSR << EARLY_UART_REG_SHIFT] + ldrb w\c, [\xb, #UART_LSR << CONFIG_EARLY_UART_8250_REG_SHIFT] and w\c, w\c, #UART_LSR_THRE cmp w\c, #UART_LSR_THRE b.ne 1b @@ -38,7 +38,7 @@ */ .macro early_uart_transmit xb wt /* UART_THR transmit holding */ - strb \wt, [\xb, #UART_THR << EARLY_UART_REG_SHIFT] + strb \wt, [\xb, #UART_THR << CONFIG_EARLY_UART_8250_REG_SHIFT] .endm /* diff --git a/xen/arch/arm/arm64/debug-pl011.inc b/xen/arch/arm/arm64/debug-pl011.inc index 569c3dfbcf47..385deff49b1b 100644 --- a/xen/arch/arm/arm64/debug-pl011.inc +++ b/xen/arch/arm/arm64/debug-pl011.inc @@ -24,9 +24,9 @@ * c: scratch register number */ .macro early_uart_init xb, c - mov x\c, #(7372800 / EARLY_PRINTK_BAUD % 16) + mov x\c, #(7372800 / CONFIG_EARLY_UART_PL011_BAUD_RATE % 16) strh w\c, [\xb, #0x28] /* -> UARTFBRD (Baud divisor fraction) */ - mov x\c, #(7372800 / EARLY_PRINTK_BAUD / 16) + mov x\c, #(7372800 / CONFIG_EARLY_UART_PL011_BAUD_RATE / 16) strh w\c, [\xb, #0x24] /* -> UARTIBRD (Baud divisor integer) */ mov x\c, #0x60 /* 8n1 */ str w\c, [\xb, #0x2C] /* -> UARTLCR_H (Line control) */ diff --git a/xen/arch/arm/arm64/debug.S b/xen/arch/arm/arm64/debug.S index b7f53ac0519b..71cad9d762b2 100644 --- a/xen/arch/arm/arm64/debug.S +++ b/xen/arch/arm/arm64/debug.S @@ -19,8 +19,8 @@ #include <asm/early_printk.h> -#ifdef EARLY_PRINTK_INC -#include EARLY_PRINTK_INC +#ifdef CONFIG_EARLY_PRINTK_INC +#include CONFIG_EARLY_PRINTK_INC #endif /* diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S index e5015f93a2d8..4d45ea3dac3c 100644 --- a/xen/arch/arm/arm64/head.S +++ b/xen/arch/arm/arm64/head.S @@ -45,8 +45,8 @@ #define __HEAD_FLAGS ((__HEAD_FLAG_PAGE_SIZE << 1) | \ (__HEAD_FLAG_PHYS_BASE << 3)) -#if (defined (CONFIG_EARLY_PRINTK)) && (defined (EARLY_PRINTK_INC)) -#include EARLY_PRINTK_INC +#if (defined (CONFIG_EARLY_PRINTK)) && (defined (CONFIG_EARLY_PRINTK_INC)) +#include CONFIG_EARLY_PRINTK_INC #endif /* @@ -363,7 +363,7 @@ GLOBAL(init_secondary) 1: #ifdef CONFIG_EARLY_PRINTK - ldr x23, =EARLY_UART_BASE_ADDRESS /* x23 := UART base address */ + ldr x23, =CONFIG_EARLY_UART_BASE_ADDRESS /* x23 := UART base address */ PRINT("- CPU ") print_reg x24 PRINT(" booting -\r\n") @@ -843,8 +843,8 @@ ENTRY(switch_ttbr) * Clobbers x0 - x1 */ init_uart: - ldr x23, =EARLY_UART_BASE_ADDRESS -#ifdef EARLY_PRINTK_INIT_UART + ldr x23, =CONFIG_EARLY_UART_BASE_ADDRESS +#ifdef CONFIG_EARLY_UART_INIT early_uart_init x23, 0 #endif PRINT("- UART enabled -\r\n") diff --git a/xen/include/asm-arm/early_printk.h b/xen/include/asm-arm/early_printk.h index 078cf701dcb0..d5485decfa9f 100644 --- a/xen/include/asm-arm/early_printk.h +++ b/xen/include/asm-arm/early_printk.h @@ -15,7 +15,7 @@ /* need to add the uart address offset in page to the fixmap address */ #define EARLY_UART_VIRTUAL_ADDRESS \ - (FIXMAP_ADDR(FIXMAP_CONSOLE) +(EARLY_UART_BASE_ADDRESS & ~PAGE_MASK)) + (FIXMAP_ADDR(FIXMAP_CONSOLE) + (CONFIG_EARLY_UART_BASE_ADDRESS & ~PAGE_MASK)) #endif /* !CONFIG_EARLY_PRINTK */ -- Anthony PERARD _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxxxxxxxxx https://lists.xenproject.org/mailman/listinfo/xen-devel

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.